Fracture Mechanisms of Rock-Concrete Interface: Experimental and Numerical
Publication: Journal of Engineering Mechanics
Volume 142, Issue 7
Abstract
To investigate the interface mechanics and fracture properties and establish an interface tension-softening constitutive law between concrete and rock for analyzing fracture failure of rock-concrete structures, uniaxial tension and three-point bending tests are conducted on rock-concrete composite specimens with artificial grooving or natural interfaces. Tensile strength, fracture energy, and initial fracture toughness of a rock-concrete interface are obtained from experimentation. Based on the load-displacement curves measured in the three-point bending test, the energy dissipation at a rock-concrete interface is derived using the modified J-integral method. In addition, through enforcing a balance between energy dissipation and energy generated by fictitious cohesive forces acting on the fracture process zone (FPZ), the tension-softening constitutive law of a rock-concrete interface is established, which takes into account the effects of fracture energy and tensile strength of an interface. For the sake of practical applications, the tension-softening constitutive expression is simplified as a bilinear function. Finally, the crack propagation process of a series of concrete-rock composite beams is simulated numerically based on a nonlinear fracture mechanics theory by introducing a crack-propagation criterion. The predicted load versus crack mouth opening displacement (P-CMOD) curves show a reasonable agreement with the experimental ones, verifying the tension-softening constitutive law for the rock-concrete interface derived in this study.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors gratefully acknowledge the financial support of the National Natural Science Foundation of China under the grant of NSFC 51478083, 51421064, and 51109026, and the fundamental research funds for the Central Universities under the grant of DUT14LK06.
References
Alberto, A., and Valente, S. (2013). “Asymptotic fields at the tip of a cohesive frictional crack growing at the bi-material interface between a dam and the foundation rock.” Eng. Fract. Mech., 108(8), 152–161.
Barpi, F., and Valente, S. (2010). “The cohesive frictional crack model applied to the analysis of the dam-foundation joint.” Eng. Fract. Mech., 77(11), 2182–2191.
Červenka, J., Chandra Kishen, J. M., and Saouma, V. E. (1998). “Mixed mode fracture of cementitious bimaterial interfaces—Part II: Numerical simulation.” Eng. Fract. Mech., 60(1), 95–107.
Dai, J., Ueda, T., Hasan, M., and Sato, Y. (2003). “Mode I fracture behavior of FRP-concrete interfaces.” Proc. Jpn. Concr. Inst., 25(1), 1577–1582.
Dong, W., Wu, Z., and Zhou, X. (2013a). “Calculating crack extension resistance of concrete based on a new crack propagation criterion.” Constr. Build. Mater., 38(1), 879–889.
Dong, W., Zhou, X., and Wu, Z. (2013b). “On fracture process zone and crack extension resistance of concrete based on initial fracture toughness.” Constr. Build. Mater., 49(12), 352–363.
Foote, R. M. L., Mai, Y.-W., and Cotterell, B. (1986). “Crack growth resistance curves in strain-softening materials.” J. Mech. Phys. Solids, 34(6), 593–607.
Hillerborg, A., Modéer, M., and Petersson, P. E. (1976). “Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements.” Cem. Concr. Res., 6(6), 773–781.
Javanmardi, F., Léger, P., and Tinawi, R. (2005). “Seismic structural stability of concrete gravity dams considering transient uplift pressures in cracks.” Eng. Struct., 27(4), 616–628.
Kishen, J. M. C., and Saouma, V. E. (2004). “Fracture of rock-concrete interfaces: Laboratory tests and applications.” ACI Struct. J., 101(3), 325–331.
Kishen, J. M. C., and Singh, K. D. (2001). “Stress intensity factors based fracture criteria for kinking and branching of interface crack: Application to dams.” Eng. Fract. Mech., 68(2), 201–219.
Nagashima, T., Omoto, Y., and Tani, S. (2003). “Stress intensity factor analysis of interface cracks using X-FEM.” Int. J. Numer. Methods Eng., 56(8), 1151–1173.
Niwa, J., Sumranwanich, T., and Tangtermsirikul, S. (1998). “New method to determine tension softening curve of concrete.” Proc., Fracture Mechanics of Concrete Structures: Proc., FRAMCOS-3, AEDIFICA TIO, Freiburg, Germany, 347–356.
Petersson, P. E. (1981). “Crack growth and development of fracture zones in plain concrete and similar materials.” Lund Institute of Technology, Lund, Sweden.
Shah, S. G., Bhasya, V., and Kishen, J. M. C. (2011). “Tension-softening properties for concrete-concrete interfaces.” ACI Struct. J., 108(6), 725–734.
Shah, S. G., and Kishen, J. M. C. (2010). “Nonlinear fracture properties of concrete-concrete interfaces.” Mech. Mater., 42(10), 916–931.
Slowik, V., Chandra Kishen, J. M., and Saouma, V. E. (1998). “Mixed mode fracture of cementitious bimaterial interfaces—Part I: Experimental results.” Eng. Fract. Mech., 60(1), 83–94.
Sujatha, V., and Kishen, J. M. C. (2003). “Energy release rate due to friction at bimaterial interface in dams.” J. Eng. Mech., 793–800.
Tian, H. M., Chen, W. Z., Yang, D. S., and Yang, J. P. (2014). “Experimental and numerical analysis of the shear behaviour of cemented concrete-rock joints.” Rock Mech. Rock Eng., 48(1), 213–222.
Wittmann, F. H., Rokugo, K., Brühwiler, E., Mihashi, H., and Simonin, P. (1988). “Fracture energy and strain softening of concrete as determined by means of compact tension specimens.” Mater. Struct., 21(1), 21–32.
Wu, Z., Rong, H., Zheng, J., and Dong, W. (2013). “Numerical method for mixed-mode I-II crack propagation in concrete.” J. Eng. Mech., 1530–1538.
Wu, Z., Wu, X., Dong, W., Zheng, J., and Wu, Y. (2014). “An analytical method for determining the crack extension resistance curve of concrete.” Mag. Concr. Res., 66(14), 719–728.
Xu, S., and Reinhardt, H. (1999a). “Determination of double-determination of double-K criterion for crack propagation in quasi-brittle fracture—Part I: Experimental investigation of crack propagation.” Int. J. Fract., 98(2), 111–149.
Xu, S., and Reinhardt, H. W. (1999b). “Determination of double-K criterion for crack propagation in quasi-brittle fracture—Part II: Analytical evaluating and practical measuring methods for three-point bending notched beams.” Int. J. Fract., 98(2), 151–177.
Yang, S., Song, L. I., Li, Z. H. E., and Huang, S. (2008). “Experimental investigation on fracture toughness of interface crack for rock/concrete.” Int. J. Mod. Phys. B, 22(31–32), 6141–6148.
Zhang, D., Ueda, T., and Furuuchi, H. (2013). “Fracture mechanisms of polymer cement mortar: Concrete interfaces.” J. Eng. Mech., 167–176.
Zhong, H., Ooi, E. T., Song, C., Ding, T., Lin, G., and Li, H. (2014). “Experimental and numerical study of the dependency of interface fracture in concrete–rock specimens on mode mixity.” Eng. Fract. Mech., 124–125(7), 287–309.
Information & Authors
Information
Published In
Copyright
© 2016 American Society of Civil Engineers.
History
Received: Aug 24, 2015
Accepted: Jan 29, 2016
Published online: Mar 21, 2016
Published in print: Jul 1, 2016
Discussion open until: Aug 21, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.