Approximate Method for Estimating Extreme Value Responses of Nonlinear Stochastic Dynamic Systems
Publication: Journal of Engineering Mechanics
Volume 141, Issue 7
Abstract
This paper proposes an approximate method for estimating the extreme value responses of nonlinear dynamic systems to random excitations. The method focuses on the mean zero responses with the unimodal and symmetrical distributions and uses, respectively, the generalized Gaussian distributions (GGDs) and the Nataf distribution to model the marginal distributions of the displacement and velocity responses and the joint distribution of them. By using an effective parameter estimation method and empirical formula, the parameters in the GGD models and Nataf model are estimated, respectively, from the response statistics obtained from stochastic simulation. Under the Poisson assumption of the upcrossing events of the response of interest, the extreme value estimate is obtained from the analysis of the first passage probabilities of the response. The proposed method is suitable for both hardening and softening responses and, moreover, has a high enough efficiency and accuracy for practical applications. Numerical examples demonstrate the efficiency, accuracy, and utility of the method in the extreme value response estimates.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The anonymous reviewers are gratefully acknowledged for their constructive criticisms of the original version of the paper.
References
Au, S. K., and Beck, J. L. (2003). “Subset simulation and its application to seismic risk based on dynamic analysis.” J. Eng. Mech., 901–917.
Bouc, R. (1967). “Forced vibration of mechanical systems with hysteresis.” Proc., 4th Conf. on Nonlinear Oscillation, Czechoslovakia, Prague.
Fujimura, K., and Der Kiureghian, A. (2007). “Tail-equivalent linearization method for nonlinear random vibration.” Probab. Eng. Mech., 22(1), 63–76.
He, J. (2009). “Numerical calculation for first excursion probabilities of linear systems.” Probab. Eng. Mech., 24(3), 418–425.
He, J. (2012). “Response spectral characteristics and reliabilities of linear structures to both intensity and frequency content time-varying earthquake loads.” J. Struct. Eng., 1492–1504.
Kanai, K. (1975). “Semi-empirical formula for the seismic characteristics of the ground.” Bull. Earthquake Res. Inst. Univ. Tokyo, 35(2), 309–325.
Lin, Y. K., and Cai, G. Q. (2004). Probabilistic structural dynamic-advanced theory and applications, Mc Graw-Hill, New York.
Liu, P. L., and Der Kiureghian, A. (1986). “Multivariate distribution models with prescribed marginals and covariances.” Probab. Eng. Mech., 22(1), 63–76.
Lutes, L. D., and Sarkani, S. (2004). Random vibrations: Analysis of structural and mechanical systems, Butterworth–Heinemann, Burlington, MA.
Molina, J. A. D. (2001). “A practical procedure to estimate the shape parameter in the generalized Gaussian distribution.” 〈http://www.cimat.mx/reportes/enlinea/I-01-18_eng.pdf〉.
Nadarajah, S. (2005). “A generalized normal distribution.” J. Appl. Stat., 32(7), 685–694.
Naess, A., and Gaidai, O. (2008). “Monte Carlo methods for estimating the extreme response of dynamical systems.” J. Eng. Mech., 628–636.
Nelsen, R. B. (1999). An introduction to copulas, Springer, New York.
Olsson, A., Sandberg, G., and Dahlblom, O. (2003). “On Latin hypercube sampling for structural reliability analysis.” Struct. Saf., 25(1), 47–68.
Owen, A. B. (1994). “Controlling correlations in Latin hypercube samples.” J. ASA, 89(428), 1517–1522.
Rice, S. O. (1944). “Mathematical analysis of random noise.” J. Bell Syst. Tech., 23(3), 282–332.
Shinozuka, M. (1972). “Monte Carlo solution of structural dynamics.” Comput. Struct., 2(5-6), 855–874.
Tajimi, H. (1960). “A statistical method of determining the maximum response of a building structure during an earthquake.” Proc., 2nd Word Conf. on Earthquake Engineering, Univ. of Tokyo, Tokyo and Kyoto, Japan, 781–798.
VanMarcke, E. H. (1975). “On the distribution of the first-passage time for normal stationary random process.” J. Appl. Mech., 42(1), 215–220.
Varanasi, M. K., and Aazhang, B. (1989). “Parametric generalized Gaussian density estimation.” J. Acoust. Soc. Am., 86(4), 1404–1415.
Wen, Y. K. (1976). “Method for random vibration of hysteretic systems.” J. Eng. Mech. Div., 102(2), 249–263.
Wen, Y. K. (1980). “Equivalent linearization for hysteretic systems under random excitation.” Appl. Mech., 47(1), 150–154.
Winterstein, S. R. (1988). “Nonlinear vibration models for extremes and fatigue.” J. Eng. Mech., 1772–1790.
Information & Authors
Information
Published In
Copyright
© 2015 American Society of Civil Engineers.
History
Received: Aug 1, 2014
Accepted: Nov 10, 2014
Published online: Apr 20, 2015
Published in print: Jul 1, 2015
Discussion open until: Sep 20, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.