Fracture and Size Effect on Strength of Plain Concrete Disks under Biaxial Flexure Analyzed by Microplane Model M7
Publication: Journal of Engineering Mechanics
Volume 140, Issue 3
Abstract
The biaxial tensile strength of concrete (and ceramics) can be easily tested by flexure of unreinforced circular disks. A recent experimental study demonstrated that, similar to plain concrete beams, the flexural strength of disks suffers from a significant size effect. However, the experiments did not suffice to determine the size effect type conclusively. The purpose of this study is to use three-dimensional stochastic finite-element analysis to determine the size effect type and shed more light on the fracture behavior. A finite-element code using the microplane constitutive Model M7 is verified and calibrated by fitting the previously measured load-deflections curves and fracture patterns of disks of thicknesses 30, 48, and 75 mm, similar in three dimensions, and on flexure tests on four-point loaded beams. It is found that the deformability of the supports and their lifting and sliding has a large effect on the simulations, especially on the fracture pattern, and the strength and Young’s modulus of concrete must be treated as autocorrelated random fields. The calibrated model is then used to analyze the size effect over a much broader range of disk thicknesses ranging from 20 to 192 mm. The disks are shown to exhibit the typical energetic size effect of Type I, that is, the disks fail (under load control) as soon as the macrofracture initiates from the smooth bottom surface. The curve of nominal strength versus size has a positive curvature and its deterministic part terminates with a horizontal asymptote. The fact that material randomness had to be introduced to fit the fracture patterns confirms that the Type 1 size effect must terminate at very large sizes with a Weibull statistical asymptote, although the disks analyzed are not large enough to discern it.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
Financial support from the DOT, provided through Grant No. 20778 from the Infrastructure Technology Institute of Northwestern University, is gratefully appreciated. Additional support for the analysis was provided by NSF Grant No. CMMI-1129449 to Northwestern University. Computer support by Quest, the high performance cluster supercomputer at Northwestern University, was indispensable. The work of the third author was partially supported by the National Research Foundation of Korea (Grant No. 2012R1A1B3004227) to Korea University.
References
ABAQUS. (2011). ABAQUS/explicit user’s manual—ABAQUS version 6.11, Dassault Systèmes Simulia, Providence, RI.
Asaro, R. J., and Rice, J. R. (1977). “Strain localization in ductile single crystals.” J. Mech. Phys. Solids, 25(5), 309–338.
ASTM. (2008). “Standard test method for flexural toughness of fiber-reinforced concrete (using centrally-loaded round panel).” C1550, West Conshohocken, PA.
Batdorf, S., and Budianski, B. (1949). “A mathematical theory of plasticity based on the concept of slip.” Technical Note No. 1871, National Advisory Committee for Aeronautics, Washington, DC.
Batdorf, S. B., and Crose, J. G. (1974). “A statistical theory for the fracture of brittle structures subjected to polyaxial stress states.” J. Appl. Mech., 41(2), 459–465.
Bažant, Z. (1984). “Microplane model for strain-controlled inelastic behavior.” C. S. Desai and R. H. Gallagher, eds., Chapter 3, Mechanics of engineering materials, Wiley, London, 45–59.
Bažant, Z. P., Caner, F. C., Carol, I., Adley, M. D., and Akers, S. A. (2000). “Microplane model M4 for concrete. I: Formulation with work-conjugate deviatoric stress.” J. Eng. Mech., 944–953.
Bažant, Z. P., and Cedolin, L. (2010). Stability of structures: Elastic, inelastic, fracture and damage theories, 3rd Ed., World Scientific, London.
Bažant, Z. P., and Novák, D. (2000). “Probabilistic nonlocal theory for quasibrittle fracture initiation and size effect. I: Theory.” J. Eng. Mech., 166–174.
Bažant, Z. P., and Novák, D. (2001). “Proposal for standard test of modulus of rupture of concrete with its size dependence.” ACI Mater. J., 98(1), 79–87.
Bažant, Z. P., and Oh, B.-H. (1985). “Microplane model for progressive fracture of concrete and rock.” J. Eng. Mech., 559–582.
Bažant, Z. P., and Planas, J. (1998). Fracture and size effect: In concrete and other quasibrittle materials, CRC, New York.
Caner, F. C., and Bažant, Z. P. (2000). “Microplane model M4 for concrete. II: Algorithm and calibration.” J. Eng. Mech., 954–961.
Caner, F. C. and Bažant, Z. P. (2013). “Microplane model M7 for plain concrete. I: Formulation.” J. Eng. Mech., 1714–1723.
Caner, F. C., Bažant, Z. P., Hoover, C., Waas, A., and Shahwan, K. (2011). “Microplane model for fracturing damage of tri-axially braided fiber-polymer composites.” J. Eng. Mater. Technol., 133(2), 021024.
Červenka, J., Bažant, Z. P., and Wierer, M. (2005). “Equivalent localization element for crack band approach to mesh-sensitivity in microplane model.” Int. J. Numer. Methods Eng., 62(5), 700–726.
Cirpka, O. A. (2003). “Generation of random, autocorrelated, periodic fields.” Scientific/Educational MATLAB Database, 〈http://m2matlabdb.ma.tum.de/download.jsp?MC_ID=6&MP_ID=31〉 (Oct. 2012).
Cusatis, G., Beghini, H., and Bažant, Z. P. (2008). “Spectral stiffness microplane model for quasi-brittle composite laminates: I. Theory.” J. Appl. Mech., 75(1), 1–9.
Engineering Toolbox. (2012). “Modulus of elasticity—Young modulus for some common materials.” 〈http://www.engineeringtoolbox.com/young-modulus-d_417.html〉 (Aug. 2012).
Fessler, H., and Fricker, D. C. (1984). “A theoretical analysis of the ring-on-ring loading disk test.” J. Am. Ceram. Soc., 67(9), 582–588.
Giovan, M. N., and Sines, G. (1979). “Biaxial and uniaxial data for statistical comparisons of a ceramic’s strength.” J. Am. Ceram. Soc., 62(9–10), 510–515.
Kim, J., Yi, C., and Zi, G. (2012). “Biaxial flexural strength of concrete by two different methods.” Mag. Concr. Res., 64(1), 21–33.
Lee, S., Song, Y., and Han, S. (2004). “Biaxial behavior of plain concrete of nuclear containment building.” Nucl. Eng. Des., 227(2),143–153.
Mindess, S., and Francis, Y. J. (1981). Concrete, Prentice Hall, Englewood Cliffs, NJ.
Morrell, R. (1998). Biaxial flexural strength testing of ceramic materials: Measurement good practice guide, No. 12, National Physical Laboratory, Middlesex, U.K.
Northwestern University Information Technology. (2012). “Quest.” 〈http://www.it.northwestern.edu/ research/adv-research/hpc/quest/index.html〉 (Jun. 2012).
Shetty, D. K., Rosenfield, A. R., and Duckworth, W. H. (1983). “Crack branching in ceramic disks subjected to biaxial flexure.” J. Am. Ceram. Soc., 66(1), C-10–C-12.
Taylor, G. I. (1938). “Plastic strain in metals.” J. Inst. Met. London, 62, 307–324.
Timoshenko, S. P., and Woinowsky-Krieger, S. (1959). Theory of plates and shells, 2nd Ed., McGraw Hill, New York.
Zi, G., Oh, H., and Park, S.-K. (2008). “A novel indirect tensile test method to measure the biaxial tensile strength of concretes and other quasibrittle materials.” Cement Concr. Res., 38(6), 751–756.
Zi, J., Kim, J., and Bažant, Z. P. (2013). “Size effect on biaxial tensile strength of concrete.” ACI Mater. J., in press.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Feb 25, 2013
Accepted: Jun 24, 2013
Published online: Jun 26, 2013
Published in print: Mar 1, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.