Mean and Variance of Mobilized Shear Strength for Spatially Variable Soils under Uniform Stress States
Publication: Journal of Engineering Mechanics
Volume 140, Issue 3
Abstract
This study proposes a set of simple equations for the mean value and variance of the mobilized shear strength for spatially variable soil masses subjected to uniform stress states. These equations are fairly effective in explaining the complicated behaviors for the mobilized shear strengths, regardless of stress states (e.g., compression or shear), spatial variability patterns (e.g., isotropic or anisotropic), and inherent mean and variance of the random field. Two mechanisms that affect the behaviors of the mobilized shear strength are identified: (1) the averaging effect along the potential slip curves, and (2) the emergent feature of a critical slip curve. The emergence is associated with the slip curve with the minimum averaged strength. In any realization of the random field, it is not possible to know a priori the location of the minimum average; hence, it would not coincide with a prescribed average. It is shown that the well-known phenomenon of critical scale of fluctuation is the result of the trade-off between these two mechanisms.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This study was completed under the sponsorship of the National Science Council (NSC) of Republic of China, under the project NSC100-2628-E-002-040-MY3. The first author acknowledges gracious support from NSC.
References
Andrade, J. E., and Borja, R. I. (2006). “Capturing strain localization in dense sands with random density.” Int. J. Numer. Methods Eng., 67(11), 1531–1564.
Breysse, D., Niandou, H., Elachachi, S., and Houy, L. (2005). “A generic approach to soil-structure interaction considering the effects of soil heterogeneity.” Geotechnique, 55(2), 143–150.
Ching, J., and Phoon, K.-K. (2013a). “Effect of element sizes in random field finite element simulations of soil shear strength.” Comput. Struct., 126, 120–134.
Ching, J., and Phoon, K.-K. (2013b). “Mobilized shear strength of spatially variable soils under simple stress states.” Struct. Saf., 41, 20–28.
Efron, B., and Tibshirani, R. (1993). An introduction to the bootstrap, Chapman and Hall/CRC, Boca Raton, FL.
Fenton, G. A., and Griffiths, D. V. (2003). “Bearing capacity prediction of spatially random soils.” Can. Geotech. J., 40(1), 54–65.
Fenton, G. A., and Griffiths, D. V. (2008). Risk assessment in geotechnical engineering, Wiley, New York.
Jha, S. K., and Ching, J. (2013). “Simulating spatial averages of stationary random field using Fourier series method.” J. Eng. Mech., 594–605.
Mollon, G., Phoon, K. K., Dias, D., and Soubra, A.-H. (2011). “Validation of a new 2D failure mechanism for the stability analysis of a pressurized tunnel face in spatially varying sand.” J. Eng. Mech., 8–21.
Phoon, K. K., Quek, S. T., and An, P. (2003). “Identification of statistically homogeneous soil layers using modified Bartlett statistics.” J. Geotech. Geoenviron. Eng., 649–659.
Rechenmacher, A. L., and Medina-Cetina, Z. (2007). “Calibration of soil constitutive models with spatially varying parameters.” J. Geotech. Geoenviron. Eng., 1567–1576.
Rudnicki, J. W., and Rice, J. R. (1975). “Conditions for the localization of deformation in pressure-sensitive dilatant materials.” J. Mech. Phys. Solids, 23(6), 371–394.
Soubra, A. H., Massih, D. S. Y. A., and Kalfa, M. (2008). “Bearing capacity of foundations resting on a spatially random soil.” Proc., GeoCongress 2008: Geosustainability and Geohazard Mitigation, ASCE, Reston, VA, 66–73.
Vanmarcke, E. H. (1977). “Probabilistic modeling of soil profiles.” J. Geotech. Engrg. Div., 103(11), 1227–1246.
Williams, J. R., and Rege, N. (1997). “Coherent vortex structures in deforming granular materials.” Mech. Cohes.-Frict. Mater., 2(3), 223–236.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Jun 1, 2012
Accepted: May 13, 2013
Published online: May 15, 2013
Published in print: Mar 1, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.