Influence of Particle Shape on Behavior of Rockfill Using a Three-Dimensional Deformable DEM
Publication: Journal of Engineering Mechanics
Volume 139, Issue 12
Abstract
The deformable discrete-element method (DEM) was employed to study the effect of particle shape on the macroscopic mechanical behavior of rockfill materials. Relationships among the micromechanical parameters and macroscopic response of rockfill materials were identified by simulating triaxial compression tests on numerical samples. The numerical experiment results showed that the particle shape has a significant impact on the macroscopic response of rockfill. For instance, the peak strength and residual strength of the numerical sample and the axial strain corresponding to the peak strength increased with an increase in the aspect ratio of the particle.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work was sponsored by the National Natural Science Foundation of China (No. 50839004 and 50979082) and Program for Changjiang Scholars and Innovative Research Team in University (No. IRT1031).
References
Belheine, N., Plassiard, J. P., Donze, F. V., Darve, F., and Seridi, A. (2009). “Numerical simulation of drained triaxial test using 3D discrete element modeling.” Comput. Geotech., 36(1–2), 320–331.
Cundall, P. A. (1988). “Formulation of a three-dimensional distinct element model—Part I: A scheme to detect and represent contacts in a system composed of many polyhedral blocks.” Int. J. Rock Mech. Min. Sci. Geomech. Abstr., 25(3), 107–116.
Cundall, P. A., and Strack, O. D. L. (1979). “A discrete numerical model for granular assemblies.” Geotechnique, 29(1), 47–65.
Deluzarche, R., and Cambou, B. (2006). “Discrete numerical modelling of rockfill dams.” Int. J. Numer. Anal. Methods Geomech., 30(11), 1075–1096.
Houlsby, G. T. (2009). “Potential particles: A method for modelling non-circular particles in DEM.” Comput. Geotech., 36(6), 953–959.
Janbu, N. (1963). “Soil compressibility as determined by oedometer and traixial tests.” Proc., European Conf. on Soil Mechanics and Fundamental Engineering, Vol. 1, Deutsche Gesellshaft für Erd- und Grundbau, Wiesbaden, Germany, 19–25.
Latham, J. P., Lu, Y., and Munjiza, A. (2001). “A random method for simulating loose packs of angular particles using tetrahedra.” Geotechnique, 51(10), 871–879.
Lewis, R. W., Gethin, D. T., Yang, X. S., and Rowe, R. C. (2005). “A combined finite-discrete element method for simulating pharmaceutical powder tableting.” Int. J. Numer. Methods Eng., 62(7), 853–869.
Ma, G., Zhou, W., Chang, X. L., and Zhou, C. B. (2010). “Study of anchorage mechanism of granular mixture.” Chin. J. Rock Mech. Eng., 29(8), 1577–1584 (in Chinese).
Mirghasemi, A. A., Rothenburg, L., and Matyas, E. (2002). “Influence of particle shape on engineering properties of assemblies of two-dimensional polygon-shaped particles.” Geotechnique, 52(3), 209–217.
Morris, J. P., Rubin, M. B., Block, G. I., and Bonner, M. P. (2006). “Simulations of fracture and fragmentation of geologic materials using combined FEM/DEM analysis.” Int. J. Impact Eng., 33(1–12), 463–473.
Munjiza, A. (2004). The combined finite-discrete element method, Wiley, Chichester, U.K.
Munjiza, A., Latham, J. P., and John, N. W. M. (2003). “3D dynamics of discrete element systems comprising irregular discrete elements.” Int. J. Numer. Methods Eng., 56(1), 35–55.
Munjiza, A., Owen, D. R. J., and Bicanic, N. (1995). “A combined finite-discrete element method in transient dynamics of fracturing solids.” Eng. Comput., 12(2), 145–174.
Nezami, E. G., Hashash, Y. M. A., Zhao, D., and Ghaboussi, J. (2004). “A fast contact detection algorithm for 3-D discrete element method.” Comput. Geotech., 31(7), 575–587.
Nouguier-Lehon, C., Vincens, E., and Cambou, B. (2005). “Structural changes in granular materials: The case of irregular polygonal particles.” Int. J. Solids Struct., 42(24–25), 6356–6375.
Owen, D. R. J., et al. (2004). “The modelling of multi-fracturing solids and particulate media.” Int. J. Numer. Methods Eng., 60(1), 317–339.
Peña, A. A., Lizcano, A., Alonso-Marroquin, F., and Herrmann, H. J. (2008). “Biaxial test simulations using a packing of polygonal particles.” Int. J. Numer. Anal. Methods Geomech., 32(2), 143–160.
Seyedi Hosseininia, E., and Mirghasemi, A. A. (2006). “Numerical simulation of breakage of two-dimensional polygon-shaped particles using discrete element method.” Powder Technol., 166(2), 100–112.
Xiang, J. S., Munjiza, A., Latham, J. P., and Guises, R. (2009). “On the validation of DEM and FEM/DEM models in 2D and 3D.” Eng. Comput., 26(6), 673–687.
Zhou, W., Chang, X. L., and Zhou, C. B. (2009). “Stochastic granule discontinuous deformation model of rockfill and its application.” Chin. J. Rock Mech. Eng., 28(3), 491–499 (in Chinese).
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Jun 9, 2011
Accepted: Feb 13, 2013
Published online: Feb 15, 2013
Published in print: Dec 1, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.