Bridge Performance Monitoring Based on Traffic Data
Publication: Journal of Engineering Mechanics
Volume 139, Issue 11
Abstract
There is a huge interest in developing new performance metrics, based on monitoring information and considering uncertainties in the resistance and loading effects, to be used by stakeholders when determining maintenance and rehabilitation strategies for existing bridges. The cost of structural health monitoring is generally a criterion in the duration of the monitoring program, and determining when, and how long, monitoring can be interrupted is still a challenge. Providing an approach that quantifies the benefits of monitoring is crucial for stakeholders. The objective of this paper is threefold: build a performance indicator based on monitoring information that considers uncertainties and correlation in recorded data; use this indicator to check and predict if serviceability and safety thresholds are reached; and analyze the impact of short monitoring interruptions on the performance assessment accuracy by balancing cost of monitoring with the efficiency of the results. The originality of the proposed approach consists in the introduction of a performance indicator in the structural reliability analysis, based on monitoring programs. The regression methodology enables one to apply the reliability analysis when monitoring is interrupted during short-term periods and to assess the impact of such interruptions on the structural analysis accuracy. The proposed approach is applied on an existing bridge.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
Support from the National Science Foundation through grant No. CMS-0639428, the Commonwealth of Pennsylvania’s Department of Community and Economic Development through the Pennsylvania Infrastructure Technology Alliance (PITA), the U.S. Federal Highway Administration Cooperative Agreement Award No. DTFH61-07-H-00040, and the U.S. Office of Naval Research Contract No. N-00014-08-0188, is gratefully acknowledged. The opinions and conclusions presented in this paper are those of the writers and do not necessarily reflect the views of the sponsoring organizations.
References
AASHTO. (2007). LRFD bridge design specifications, 4th Ed., Washington, DC.
Akgül, F., and Frangopol, D. M. (2004). “Lifetime performance analysis of existing steel girder bridge superstructures.” J. Struct. Eng., 130(12), 1875–1888.
Caprani, C. C., and O’Brien, E. J. (2010). “The use of predictive likelihood to estimate the distribution of extreme bridge traffic load effect.” Struct. Saf., 32(2), 138–144.
Chen, Y., and Feng, M. Q. (2009). “Structural health monitoring by recursive Bayesian filtering.” J. Eng. Mech., 135(4), 231–242.
Cheung, S., and Beck, J. (2009). “Bayesian model updating using hybrid Monte Carlo simulation with application to structural dynamic models with many uncertain parameters.” J. Eng. Mech., 135(4), 243–255.
Connor, R. J., and Fisher, J. W. (2002). “Report on field inspection, assessment, and analysis of floorbeam connection cracking on the Birmingham Bridge, Pittsburgh PA.” ATLSS Rep. No. 02-10, Lehigh Univ., Bethlehem, PA.
Deb, K., Pratap, A., Agarwal, S., and Meyarivan, T. (2002). “A fast and elitist multiobjective genetic algorithm: NSGA-II.” IEEE Trans. Evol. Comput., 6(2), 182–197.
Douglas, B. M., and Reid, W. H. (1982). “Dynamic tests and system identification of bridges.” J. Struct. Eng., 108(10), 2295–2311.
Enright, M. P., and Frangopol, D. M. (1998a). “Failure time prediction of deteriorating fail-safe structures.” J. Struct. Eng., 124(12), 1448–1457.
Enright, M. P., and Frangopol, D. M. (1998b). “Service-life prediction of deteriorating concrete bridges.” J. Struct. Eng., 124(3), 309–317.
Enright, M. P., and Frangopol, D. M. (1999). “Condition prediction of deteriorating concrete bridges using Bayesian updating.” J. Struct. Eng., 125(10), 1118–1125.
Estes, A. C., and Frangopol, D. M. (1999). “Repair optimization of highway bridges using system reliability approach.” J. Struct. Eng., 125(7), 766–775.
Estes, A. C., and Frangopol, D. M. (2005). “Life-cycle evaluation and condition assessment of structures.” Chapter 36, Structural engineering handbook, 2nd Ed., W.-F. Chen and E. M. Lui, eds., CRC Press, Boca Raton, FL, 36.1–36.51.
Farhey, D. N. (2005). “Bridge instrumentation and monitoring for structural diagnostics.” Struct. Health Monit., 4(4), 301–318.
Frangopol, D. M. (2011). “Life-cycle performance, management, and optimization of structural systems under uncertainty: accomplishments and challenges.” Struct. Infrastruct. Eng., 7(6), 389–413.
Frangopol, D. M., and Messervey, T. B. (2009a). “Life-cycle cost and performance prediction: role of structural health monitoring.” Chapter 16, Frontier technologies for infrastructures engineering, S.-S. Chen and A. H.-S. Ang, eds., CRC Press-Balkema-Taylor & Francis Group, Leiden, Netherlands, 361–381.
Frangopol, D. M., and Messervey, T. (2009b). “Maintenance principles for civil structures.” Chapter 89, Encyclopedia of structural health monitoring, C. Boller, F.-K. Chang, and Y. Fujino, eds., Vol. 4, Wiley, New York, 1533–1562.
Frangopol, D. M., Strauss, A., and Kim, S. (2008a). “Bridge reliability assessment based on monitoring.” J. Bridge Eng., 13(3), 258–270.
Frangopol, D. M., Strauss, A., and Kim, S. (2008b). “Use of monitoring extreme data for the performance prediction of structures: General approach.” Eng. Struct., 30(12), 3644–3653.
Goulet, J., and Smith, I. (2012). Predicting the usefulness of monitoring for identifying the behavior of structures, ASCE, Reston, VA.
Kim, S., and Frangopol, D. M. (2010). “Optimal planning of structural performance monitoring based on reliability importance assessment.” Probabil. Eng. Mech., 25(1), 86–98.
Kim, J. T., Park, J.-H., Hong, D.-S., and Park, W. S. (2010). “Hybrid health monitoring of prestressed concrete girder bridges by sequential vibration-impedance approaches.” Eng. Struct., 32(1), 115–128.
Kwon, K., and Frangopol, D. M. (2010). “Bridge fatigue reliability assessment using probability density functions of equivalent stress range based on field monitoring data.” Int. J. Fatigue, 32(8), 1221–1232.
Lanza di Scalea, F., Rizzo, P., Karbhari, V. and Seible, F. (2000). “Health monitoring of UCSD’s I-5/Gilman advanced technology bridge.” Smart Materials Bulletin, 2000(11), 6–10.
Law, S. S., and Li, J. (2010). “Updating the reliability of a concrete bridge structure based on condition assessment with uncertainties.” Eng. Struct., 32(1), 286–296.
Leander, J., Andersson, A., and Karoumi, R. (2010). “Monitoring and enhanced fatigue evaluation of a steel railway bridge.” Eng. Struct., 32(3), 854–863.
Liu, C., DeWolfa, J. T., and Kima, J.-H. (2009a). “Development of a baseline for structural health monitoring for a curved post-tensioned concrete box-girder bridge.” Eng. Struct., 31(12), 3107–3115.
Liu, M., Frangopol, D. M., and Kim, S. (2009b). “Bridge safety evaluation based on monitored live load effects.” J. Bridge Eng., 14(4), 257–269.
Liu, M., Frangopol, D. M., and Kwon, K. (2010). “Fatigue reliability assessment of retrofitted steel bridges integrating monitored data.” Struct. Saf., 32(1), 77–89.
Madsen, H., Krenk, S., and Lind, N. C. (1986). Methods of structural safety, Prentice Hall, Englewood Cliffs, NJ.
Mahmoud, H. N., Connor, R. J., and Bowman, C. A. (2005). “Results of the fatigue evaluation and field monitoring of the I-39 Northbound Bridge over the Wisconsin River.” ATLSS Rep. No. 05-04, Lehigh Univ., Bethlehem, PA.
McLaskey, G. C., Glaser, S. D., and Grosse, C. U. (2010). “Beamforming array techniques for acoustic emission monitoring of large concrete structures.” J. Sound Vibrat., 329(12), 2384–2394.
Morassi, A., and Tonon, S. (2008). “Dynamic testing for structural identification of a bridge.” J. Bridge Eng., 13(6), 573–585.
Mori, Y., and Ellingwood, B. R. (1993). “Reliability-based service-life assessment of aging concrete structures.” J. Struct. Eng., 119(5), 1600–1621.
Muthumani, K., Lakshmanan, N., Gopalakrishnan, N., Sathishkumar, K., Sreekala, R., and Rama Rao, G. V. (2010). “Damage identification of beam-like structures through static deflection and natural frequency as damage indicators.” Proc., Indo-U.S. Forensic Practices, Indo-U.S. Forensic Engineering Workshop, ASCE, New York, 87–98.
Ni, Y. Q., Xia, H. W., Wong, K. Y., and Ko, J. M. (2012). “In-service condition assessment of bridge deck using long-term monitoring data of strain response.” J. Bridge Eng., 17(6), 876–885.
Okasha, N. M., and Frangopol, D. M. (2009). “Lifetime-oriented multi-objective optimization of structural maintenance considering system reliability, redundancy and life-cycle cost using GA.” Struct. Saf., 31(6), 460–474.
Okasha, N. M., and Frangopol, D. M. (2010). “Time-variant redundancy of structural systems.” Struct. Infrastruct., 6(1–2), 279–301.
Orcesi, A. D., and Frangopol, D. M. (2010a). “Inclusion of crawl tests and long-term health monitoring in bridge serviceability analysis.” J. Bridge Eng., 15(3), 312–326.
Orcesi, A. D., and Frangopol, D. M. (2010b). “Use of lifetime functions in the optimization of nondestructive inspection strategies for bridges.” J. Struct. Eng., 137(4), 531–539.
Orcesi, A. D., Frangopol, D. M., and Kim, S. (2010). “Optimization of bridge maintenance strategies based on multiple limit states and monitoring.” Eng. Struct., 32(3), 627–640.
Patjawit, A., and Kanok-Nukulchai, W. (2005). “Health monitoring of highway bridges based on a global flexibility index.” Eng. Struct., 27(9), 1385–1391.
Pipinato, A., Pellegrino, C., Bursi, O. S., and Modena, C. (2009). “High-cycle fatigue behavior of riveted connections for railway metal bridges.” J. Construct. Steel Res., 65(12), 2167–2175.
Sampaio, R. P. C., and Maia, N. M. M. (2009). “Strategies for an efficient indicator of structural damage.” Mech. Syst. Signal Process., 23(6), 1855–1869.
Shoukry, S. N., Riad, M. Y., and William, G. W. (2009). “Longterm sensor-based monitoring of an LRFD designed steel girder bridge.” Eng. Struct., 31(12), 2954–2965.
Soyoz, S., Feng, M. Q., and Shinozuka, M. (2010). “Structural reliability estimation with vibration-based identified parameters.” J. Eng. Mech., 136(1), 100–106.
Strauss, A., Frangopol, D. M., and Kim, S. (2008). “Use of monitoring extreme data for the performance prediction of structures: Bayesian updating.” Eng. Struct., 30(12), 3654–3666.
Tomaszewska, A. (2010). “Influence of statistical errors on damage detection based on structural flexibility and mode shape curvature.” Comp. Struct., 88(3–4), 154–164.
Yan, A., Kerschen, G. P., Boe, D., and Golinval, J. Ã. (2005). “Structural damage diagnosis under varying environmental conditions—Part I: A linear analysis.” Mech. Syst. Signal Process., 19(4), 847–864.
Yuan, X.-X., and Pandey, M. D. (2006). “Analysis of approximations for multinormal integration in system reliability integration.” Struct. Saf., 28(4), 361–377.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Aug 30, 2011
Accepted: Dec 11, 2012
Published online: Oct 15, 2013
Published in print: Nov 1, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.