Semianalytical Solution for Buckling Analysis of Variable Thickness Two-Directional Functionally Graded Circular Plates with Nonuniform Elastic Foundations
Publication: Journal of Engineering Mechanics
Volume 139, Issue 5
Abstract
In the current study, a semianalytical closed-form solution is presented for the first time for buckling analysis of two-directional, functionally graded (FG) circular plates with variable thickness supported by both constrained edges and two-parameter elastic foundations. It is assumed that the material properties of the functionally graded material (FGM) vary in the transverse and radial directions, simultaneously. While variations of the elasticity modulus in the transverse direction is described by a power-law, variations of the material properties and the thickness in the radial direction are assumed to obey exponential laws. Mindlin’s shear deformation plate theory and the differential transform technique are employed to develop the governing equations. A sensitivity analysis including evaluation of effects of various edge conditions, geometric parameters, coefficients of the elastic foundation, and material heterogeneity is performed. Results reveal that the strength degradation caused by the radial thickness reduction may be compensated by an appropriate increasing of the elasticity modulus in the radial direction. Furthermore, the elastic foundation may significantly affect the buckling load in some circumstances.
Get full access to this article
View all available purchase options and get full access to this article.
References
ABAQUS 6.12 [Computer software]. Providence, RI, Dassault Systemes.
Alipour, M. M., Shariyat, M., and Shaban, M. (2010). “A semi-analytical solution for free vibration of variable thickness two-directional-functionally graded plates on elastic foundations.” Int. J. Mech. Mater. Des., 6(4), 293–304.
Arikoglu, A., and Ozkol, I. (2005). “Solution of boundary value problems for integro-differential equations by using differential transform method.” Appl. Math. Comput., 168(2), 1145–1158.
Chang, S.-H., and Chang, I.-L. (2009). “A new algorithm for calculating two-dimensional differential transform of nonlinear functions.” Appl. Math. Comput., 215(7), 2486–2494.
Chen, C. K., and Ho, S. H. (1996). “Application of differential transformation to eigenvalue problems.” Appl. Math. Comput., 79(2–3), 173–188.
Fallah, F., and Nosier, A. (2012). “Nonlinear behavior of functionally graded circular plates with various boundary supports under asymmetric thermo-mechanical loading.” Compos. Struct., 94(9), 2834–2850.
Hosseini-Hashemi, Sh., Akhavan, H., Rokni Damavandi Taher, H., Daemi, N., and Alibeigloo, A. (2010). “Differential quadrature analysis of functionally graded circular and annular sector plates on elastic foundation.” Mater. Des., 31(4), 1871–1880.
Jalali, S. K., Naei, M. H., and Poorsolhjouy, A. (2010). “Thermal stability analysis of circular functionally graded sandwich plates of variable thickness using pseudo-spectral method.” Mater. Des., 31(10), 4755–4763.
Li, S.-R., Zhang, J.-H., and Zhao, Y.-G. (2007). “Nonlinear thermomechanical post-buckling of circular FGM plate with geometric imperfection.” Thin-Walled Struct., 45(5), 528–536.
Ma, L. S., and Wang, T. J. (2003a). “Axisymmetric post-buckling of a functionally graded circular plate subjected to uniformly distributed radial compression.” Mater. Sci. Forum, 423–425, 719–724.
Ma, L. S., and Wang, T. J. (2003b). “Nonlinear bending and post-buckling of a functionally graded circular plate under mechanical and thermal loadings.” Int. J. Solids Struct., 40(13–14), 3311–3330.
Ma, L. S., and Wang, T. J. (2004). “Relationships between axisymmetric bending and buckling solutions of FGM circular plates based on third-order plate theory and classical plate theory.” Int. J. Solids Struct., 41(1), 85–101.
Naderi, A. and Saidi, A.R. (2011a). “Buckling analysis of functionally graded annular sector plates resting on elastic foundations.” Proc. Inst. Mech. Eng. C Mech. Eng. Sci., 225(2), 312–325.
Naderi, A., and Saidi, A. R. (2011b). “Exact solution for stability analysis of moderately thick functionally graded sector plates on elastic foundation.” Compos. Struct., 93(2), 629–638.
Najafizadeh, M. M., and Eslami, M. R. (2002a). “Buckling analysis of circular plates of functionally graded materials under uniform radial compression.” Int. J. Mech. Sci., 44(12), 2479–2493.
Najafizadeh, M. M., and Eslami, M. R. (2002b). “First order theory based thermoelastic stability of functionally graded materials circular plates.” AIAA J., 40(7), 1444–1450.
Najafizadeh, M. M., and Eslami, M. R. (2004). “Refined theory for thermoelastic stability of functionally graded circular plates.” J. Therm. Stresses, 27, 857–880.
Najafizadeh, M. M., and Heydari, H. R. (2004). “Thermal buckling of functionally graded circular plates based on higher order shear deformation plate theory.” Eur. J. Mech. A, Solids, 23(6), 1085–1100.
Najafizadeh, M. M., and Heydari, H. R. (2008). “An exact solution for buckling of functionally graded circular plates based on higher order shear deformation plate theory under uniform radial compression.” Int. J. Mech. Sci., 50(3), 603–612.
Nie, G. J., and Zhong, Z. (2010). “Dynamic analysis of multi-directional functionally graded annular plates.” Appl. Math. Model., 34(3), 608–616.
Prakash, T., and Ganapathi, M. (2006). “Asymmetric flexural vibration and thermoelastic stability of FGM circular plates using finite element method.” Compos. Part B Eng., 37(7–8), 642–649.
Rao, R. V., and Savsani, V. J. (2012). Mechanical design optimization using advanced optimization techniques, Springer, London.
Reddy, J. N. (2004). Mechanics of laminated composite plates and shells: Theory and analysis, 2nd Ed., CRC Press, Boca Raton, FL.
Reddy, J. N. (2007). Theory and analysis of elastic plates and shells, 2nd Ed., CRC/Taylor & Francis, Philadelphia.
Saidi, A. R., Rasouli, A., and Sahraee, S. (2009). “Axisymmetric bending and buckling analysis of thick functionally graded circular plates using unconstrained third-order shear deformation plate theory.” Compos. Struct., 89(1) 110–119.
Shariyat, M., and Alipour, M. M. (2011). “Differential transform vibration and modal stress analyses of circular plates made of two-directional functionally graded materials resting on elastic foundations.” Arch. Appl. Mech., 81(9) 1289–1306.
Ugural, A. C., and Fenster, S. K. (2011). Advanced mechanics of materials and applied elasticity, 5th Ed., Prentice Hall, Boston.
Xu, R. Q., Wang, Y., and Chen, W. Q. (2005). “Axisymmetric buckling of transversely isotropic circular and annular plates.” Arch. Appl. Mech., 74(10), 692–703.
Yalcin, H. S., Arikoglu, A., and Ozkol, I. (2009). “Free vibration analysis of circular plates by differential transformation method.” Appl. Math. Comput., 212(2), 377–386.
Yeh, Y.-L., Wang, C. C., and Jang, M.-J. (2007). “Using finite difference and differential transformation method to analyze of large deflections of orthotropic rectangular plate problem.” Appl. Math. Comput., 190(2), 1146–1156.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: May 26, 2011
Accepted: Aug 3, 2012
Published online: Aug 15, 2012
Published in print: May 1, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.