Ring Beam Stiffness Criterion for Column-Supported Metal Silos
Publication: Journal of Engineering Mechanics
Volume 137, Issue 12
Abstract
Cylindrical metal silos are commonly elevated to provide access space beneath to directly discharge the contained materials into transportation systems. Evenly spaced column supports are commonly utilized. In larger silos, the discrete forces from supports are more evenly transferred and distributed into the cylindrical shell wall by using a ring beam. A fundamental assumption in the design of the silo shell is that the meridional compressive stresses are relatively uniformly distributed around the circumference. This assumption can easily be violated if the ring beam is flexible, so it is necessary to determine the ring stiffness needed to achieve a particular degree of uniformity of support. Current methods of assessing this stiffness rely on onerous finite-element analysis, which only provides information for the specific design being checked. In this paper, a criterion is developed to identify the required ring beam stiffness to achieve a particular degree of uniformity in the shell stresses. It is based on the ratio of the ring beam stiffness to the cylindrical shell stiffness in axial deformation in the fundamental harmonic mode of the column support, assuming that the ring is concentrically loaded and supported at equal intervals around the circumference. Vlasov’s curved beam is used to derive a closed-form solution for the ring beam stiffness and semimembrane theory for the cylindrical shell. The resulting stiffness ratio is verified using an extensive numerical study. It is shown that the method provides an effective means of determining the required stiffness of a supporting ring beam.
Get full access to this article
View all available purchase options and get full access to this article.
References
ANSYS 12.1 [Computer software]. Canonsburg, PA, Ansys.
Calladine, C. R. (1983). Theory of shell structures, Cambridge University Press, Cambridge, U.K.
EN 1993-4-1. (2007). “Eurocode 3: Design of Steel Structures, Part 4.1: Silos.” European Committee for Standardization, Brussels, Belgium.
Flügge, W. (1973). Stresses in shells, Springer-Verlag, Berlin.
Gould, P. L., Ravichandran, R. V., and Sridharan, S. (1998). “A local-global FE model for nonlinear analysis of column-supported shells of revolution.” Thin-Walled Struct., 31(1–3), 25–37.
Gould, P. L., and Sen, S. K. (1974). “Column moments in eccentrically supported tanks.” J. Struct. Div., 100(ST3), 2165–2169.
Gould, P. L., Sen, S. K., Wang, R. S. C., Suryoutomo, H., and Lowrey, R. D. (1976). “Column supported cylindrical-conical tanks.” J. Struct. Div., 102(ST2), 429–447.
Greiner, R. (1983). “Zur Ingenieurmässigen Berechnung und Konstruktion zylindrischer behälter aus Stahl unter allgemeiner Bellastung.” Proc. “Wissenschaft und Praxis,” StahlbauSeminar 1983, 31 FHS Biberach/Riss (in German).
Greiner, R. (1984). “Zur Laengskrafteinleitung in stehende zylindrische Behaelter aus Stahl.” Stahlbau, 53(7), 210–215 (in German).
Guggenberger, W., Greiner, R., and Rotter, J. M. (2000). “The behaviour of locally-supported cylindrical shells: Unstiffened shells.” J. Constr. Steel Res., 56(2), 175–197.
Guggenberger, W., Greiner, R., and Rotter, J. M. (2004). “Cylindrical shells above local supports.” Buckling of thin metal shells, J. G. Teng and J. M. Rotter, eds, Spon, London, 88–128.
Heins, C. P. (1975). Bending and torsional design in structural members, Lexington Books, Lexington, MA.
Kildegaard, A. (1969). “Bending of a cylindrical shell subject to axial loading.” 2nd Symp. Theory of Thin Shells, IUTAM, Springer, Berlin, 301–315.
Kraus, H. (1967). Thin elastic shells, Wiley, New York.
Novozhilov, V. V. (1959). The theory of thin shells, Noordhoff, Groningen, Netherlands.
Öry, H., and Reimerdes, H. G. (1987). “Stresses in and stability of thin walled shells under non-ideal load distribution.” Proc., Int. Colloq. Stability Plate & Shell Structs, Gent, ECCS, 555–561.
Pippard, A. J. S., and Baker, J. F. (1957). The analysis of engineering structures, Edward Arnold, London.
Rotter, J. M. (1985). “Analysis and design of ringbeams.” Design of steel bins for storage of bulk solids, J. M. Rotter, ed., Univ. of Sydney, Sydney, Australia, 164–183.
Rotter, J. M. (1987). “Bending theory of shells for bins and silos.” Trans. CSME, ME12(3), 147–159.
Rotter, J. M. (1990). “Structural design of light gauge silo hoppers.” J. Struct. Eng., 116(7), 1907–1922.
Rotter, J. M., Cai, M., and Holst, J. M. F. G. (2011). “Buckling of thin cylindrical shells under locally elevated axial compression stresses.” J. Pressure Vessel Technol., 133(1), 011204.
Teng, J. G., and Rotter, J. M. (1992). “Linear bifurcation of perfect column-supported cylinders: Support modeling and boundary conditions.” Thin-Walled Struct., 14(3), 241–263.
Timoshenko, S. P., and Woinowsky-Krieger, S. (1959). Theory of plates and shells, McGraw-Hill, New York.
Ventsel, E., and Krauthammer, T. (2001). Thin plates and shells: Theory, analysis, and applications, Marcel Dekker, New York.
Vlasov, V. Z. (1961). “Thin-walled elastic beams.” National Science Foundation, Washington, DC.
Vlasov, V. Z. (1964). “General theory of shells and its applications in engineering.” NASA Technical Translation, TTF-99, Washington, DC.
Zingoni, A. (2001). “Stresses and deformations in egg-shaped sludge digestors: Discontinuity effects.” Eng. Struct., 23(11), 1373–1382.
Information & Authors
Information
Published In
Journal of Engineering Mechanics
Volume 137 • Issue 12 • December 2011
Pages: 846 - 853
Copyright
© 2011 American Society of Civil Engineers.
History
Received: Aug 13, 2010
Accepted: Jun 23, 2011
Published online: Jun 25, 2011
Published in print: Dec 1, 2011
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.