Bending of Delaminated Composite Conoidal Shells under Uniformly Distributed Load
Publication: Journal of Engineering Mechanics
Volume 137, Issue 10
Abstract
Conoidal shells are very popular roofing units owing to their aesthetic elegance and stiffness. Many parts of the globe, which were earlier assumed to be seismologically stable, are now being considered as earthquake prone. Hence the necessity to build light structures using composites has become very important. In this paper an eight-noded isoparametric shell element is applied for analyzing the bending behavior of delaminated composite conoidal shells under a uniformly distributed load with different practical boundary conditions. To ensure compatibility of deformation and equilibrium of forces and moments at the delamination crack front, a multipoint constraint algorithm is incorporated, which leads to an unsymmetrical stiffness matrix. This formulation is validated through the solution of benchmark problems. Lamination, curvature, and extent of delamination area are varied to compare the performances of delaminated conoidal shells against those with no damage. The results are carefully observed, and a set of conclusions is presented at the end of the paper.
Get full access to this article
View all available purchase options and get full access to this article.
References
Acharyya, A., Chakravorty, D., and Karmakar, A. (2008). “Bending characteristics of delaminated composite cylindrical shells with complicated boundary condition.” Int. J. Mater. Res. Electron Electr. Syst., 1(1), 11–23.
Acharyya, A., Chakravorty, D., and Karmakar, A. (2009). “Bending characteristics of delaminated composite cylindrical shells—A finite element approach.” J. Reinf. Plast. Compos., 28(8), 965–978.
Brebbia, C., and Hadid, H. (1971). “Analysis of plates and shells using rectangular curved elements.” CE/5/71, Civil Engineering Dept., Univ. of Southampton, Southampton, UK.
Chakravorty, D., Bandyopadhyay, J. N., and Sinha, P. K. (1995a). “Finite element free vibration analysis of point supported laminated composite cylindrical shells.” J. Sound Vib., 181(1), 43–52.
Chakravorty, D., Bandyopadhyay, J. N., and Sinha, P. K. (1995b). “Free vibration analysis of point-supported laminated composite doubly curved shells—A finite element approach.” Comput. Struct., 54(2), 191–198.
Chakravorty, D., Bandyopadhyay, J. N., and Sinha, P. K. (1996). “Finite element free vibration analysis of doubly curved laminated composite shells.” J. Sound Vib., 191(4), 491–504.
Chakravorty, D., Bandyopadhyay, J. N., and Sinha, P. K. (1998). “Application of FEM on free and forced vibration of laminated shells.” J. Eng. Mech., 124(1), 1–8.
Chen, Z. Q., and Simitses, G. J. (1988). “Delamination buckling of pressure-loaded, cross-ply, laminated cylindrical shells.” J. Appl. Math. Mech., 68(10), 491–501.
Choi, C. K. (1984). “A conoidal shell analysis by modified isoparametric element.” Comput. Struct., 18, 921–924.
Cook, R. D., Malkus, D. S., and Plesha, M. E. (1989). Concepts and applications of finite element analysis, Wiley, New York.
Das, H., and Chakravorty, D. (2007). “Design aids and selection guidelines for composite conoidal shell roofs—A finite element application.” J. Reinf. Plast. Compos., 26(17), 1793–1819.
Das, H., and Chakravorty, D. (2008). “Natural frequencies and mode shapes of composite conoids with complicated boundary conditions.” J. Reinf. Plast. Compos., 27(13), 1397–1415.
Dey, A., Bandyopadhyay, J. N., and Sinha, P. K. (1992). “Finite element analysis of laminated composite conoidal shell structures.” Comput. Struct., 43(3), 469–476.
Fuhui, Z., Yiming, F., and Deliang, C. (2008). “Analysis of fatigue delamination growth for piezoelectric laminated cylindrical shell considering nonlinear contact effect.” Int. J. Solids Struct., 45(20), 5381–5396.
Ghosh, B., and Bandopadhyay, J. N. (1989). “Bending analysis of conoidal shells using curved quadratic isoparametric element.” Comput. Struct., 33, 717–728.
Gim, C. K. (1994). “Plate finite element modeling of laminated plates.” Comput. Struct., 52(1), 157–168.
Hadid, H. A. (1964). “An analytical and experimental investigation into the bending theory of elastic conoidal shells.” Doctoral dissertation, Univ. of Southampton, Southampton, UK.
Hota, S., and Chakravorty, D. (2007). “Free vibration of stiffened conoidal shell roofs with cutouts.” J. Vib. Control, 13(3), 221–240.
Jin-hua, Y., and Yi-ming, F. (2007). “Delamination growth for composite laminated cylindrical shells under external pressure.” Appl. Math. Mech., 28(9), 1131–1144 (in Chinese).
Jufen, Z., Gang, Z., and Jinying, W. (2000). “FEM analysis of delamination buckling in composite plates and shells.” Appl. Math. Mech., 21(3) (in Chinese).
Nayak, A. N., and Bandyopadhyay, J. N. (2002a). “On the free vibration of stiffened shallow shells.” J. Sound Vib., 255(2), 357–382.
Nayak, A. N., and Bandyopadhyay, J. N. (2002b). “Free vibration and design aids of stiffened conoidal shells.” J. Eng. Mech., 128(4), 419–427.
Nayak, A. N., and Bandyopadhyay, J. N. (2005). “Free vibration analysis of laminated stiffened shells.” J. Eng. Mech., 131(1), 100–105.
Oh, J., Cho, M., and Kim, J. (2004). “A finite element analysis based on higher-order zig-zag shell theory for laminated composites with multiple delamination.” Proc., 45th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, AIAA, Reston, VA, 19–22.
Oh, J., Cho, M., and Kim, J. (2008). “Buckling analysis of a composite shell with multiple delaminations based on a higher order zig-zag theory.” Finite Elem. Anal. Des., 44(11), 675–685.
Parhi, P. K., Bhattacharyya, S. K., and Sinha, P. K. (2001). “Hygrothermal effects on the dynamic behavior of multiple delaminated composite plates and shells.” J. Sound Vib., 248(2), 195–214.
Prusty, B. G., Satsangi, S. K., and Ray, C. (2001). “First ply failure analysis of laminated panels under transverse loading.” J. Reinf. Plast. Compos., 20(8), 671–684.
Shen, F., Lee, K. H., and Tay, T. E. (2001). “Modeling delamination growth in laminated composites.” Compos. Sci. Technol., 61(9), 1239–1251.
Storakers, B., Larsson, P.-L., and Rohart, C. (2004). “On delamination growth in shallow shells.” J. Appl. Mech., 71(2), 247–254.
Sun, X., and Tong, L. (2001). “Progressive failure analysis of laminated plates with delamination.” J. Reinf. Plast. Compos., 20(16), 1370–1389.
Tafreshi, A. (2008). “Instability of delaminated composite cylindrical shells under combined axial compression and bending.” Compos. Struct., 82(3), 422–433.
Wang, X., and Dai, H. L. (2003). “Thermal buckling for local delamination near the surface of laminated cylindrical shells and delamination growth.” J. Thermal Stresses, 26(5), 423–442.
Yang, J. H., and Fu, Y. M. (2006). “Delamination growth of laminated composite cylindrical shells.” Theor. Appl. Fract. Mech., 45(3), 192–203.
Information & Authors
Information
Published In
Copyright
© 2011 American Society of Civil Engineers.
History
Received: Sep 16, 2009
Accepted: Jun 1, 2011
Published online: Sep 15, 2011
Published in print: Oct 1, 2011
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.