Estimation of Probabilistic Extreme Wind Load Effects: Combination of Aerodynamic and Wind Climate Data
Publication: Journal of Engineering Mechanics
Volume 136, Issue 6
Abstract
A refined full-order method is presented for estimating the extreme wind load effects of rigid structures with given mean recurrence intervals (MRIs) by combining the distributions of annual maximum wind speed and extreme load coefficients. This refined method is capable of dealing with any type of asymptotic extreme value distribution. With this full-order method, the predictions of wind load effects by using distributions of annual maximum wind velocity pressure and wind speed are compared that provide information on the sensitivity of predictions to the upper tail of wind speed distribution. The efficacy of the first-order method is examined. The influences of the type of distributions and the variations of annual maximum wind speed and extreme load coefficient on the predictions are quantified. Finally, the first- and full-order methods are extended to wind load effects of dynamically sensitive structures which facilitate a comprehensive probabilistic analysis as compared to the Monte Carlo simulation schemes used in literature. It is pointed out that 78% fractile extreme load coefficient can be used for defining the characteristic load effects of both rigid and dynamically sensitive structures. The wind load factor is insensitive to the variation of extreme load coefficient. It can be approximately estimated through the wind speed factor and the growth rate of extreme wind load effect with increasing wind speed. The result concerning the wind load factor justifies the advantage of specifying design wind speeds with various MRIs in reducing the uncertainties of design wind loading.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The support for this work was provided in part by NSF Grant No. NSFCMMI 0824748. This support is greatly acknowledged.
References
ASCE. (2006). “Minimum design loads for buildings and other structures.” SEI/ASCE7-05, Reston, Va.
Bashor, R., and Kareem, A. (2009). “Load factors for dynamically sensitive structures.” Proc., 11th Americans Conf. on Wind Eng. (CD-ROM), American Association for Wind Engineering, Fort Collins, Colo.
Cook, N. J. (1982). “Towards better estimation of extreme winds.” J. Wind. Eng. Ind. Aerodyn., 9, 295–323.
Cook, N. J. (1990). “The designer’s guide to wind loading of building structures. Part 2: Static structures.” Building Research Establishment Rep., Garston, U.K.
Cook, N. J., Harris, R. I., and Whiting, R. (2003). “Extreme wind speeds in mixed climates revisited.” J. Wind Eng. Ind. Aerodyn., 91, 403–422.
Cook, N. J., and Mayne, J. R. (1979). “A novel working approach to the assessment of wind loads for equivalent static design.” J. Ind. Aerodyn., 4, 149–164.
Cook, N. J., and Mayne, J. R. (1980). “A refined working approach to the assessment of wind loads for equivalent static design.” J. Wind. Eng. Ind. Aerodyn., 6, 125–137.
Cornell, C. A., Jalayer, F., Hamburger, R. O., and Foutch, D. A. (2002). “Probabilistic basis for 2000 SAC Federal Emergency Management Agency steel moment frame guidelines.” J. Struct. Eng., 128(4), 526–533.
Davenport, A. G. (1964). “Note on the distribution of the largest value of a random function with application to gust loading.” Proc.-Inst. Civ. Eng., 28, 187–196.
Davenport, A. G. (1999). “The missing links.” Proc., Wind Engineering into the 21st Century, 10th Int. Conf. on Wind Eng., A. Larsen, G. L. Larose, and F. M. Livesey, eds., Balkema, Rotterdam, The Netherlands, 3–13.
Diniz, S. M. C., Sadek, F., and Simiu, E. (2004). “Wind speed estimation uncertainties: Effects of climatological and micrometeorological parameters.” Probab. Eng. Mech., 19, 361–371.
Diniz, S. M. C., and Simiu, E. (2005). “Probabilistic description of wind effects and wind load factors for database-assistant design.” J. Struct. Eng., 131(3), 507–516.
Gabbai, R. D., Fritz, W. P., Wright, A. P., and Simiu, E. (2008). “Assessment of ASCE 7 standard wind load factors for tall building response estimates.” J. Struct. Eng., 134(5), 842–845.
Gumley, S. J., and Wood, C. J. (1982). “A discussion of extreme wind loading probabilities.” J. Wind. Eng. Ind. Aerodyn., 10, 31–45.
Harris, R. I. (1982). “An improved method for the prediction of extreme values of wind effects on simple buildings and structures.” J. Wind. Eng. Ind. Aerodyn., 9, 343–379.
Harris, R. I. (2004). “Discussion of ‘Specification of the design wind load based on wind tunnel experiments.’ J. Wind. Eng. Ind. Aerodyn., 91(2003), 527-541.” J. Wind. Eng. Ind. Aerodyn., 92, 71–76.
Harris, R. I. (2005). “A new direct version of the Cook-Mayne method for wind pressure probabilities in temperate storms.” J. Wind. Eng. Ind. Aerodyn., 93, 581–600.
Holmes, J. D., and Moriarty, W. M. (1999). “Application of the generalized pareto distribution to wind engineering.” J. Wind. Eng. Ind. Aerodyn., 83, 1–10.
Kareem, A. (1988). “Aerodynamic response of structures with parametric uncertainties.” Struct. Safety, 5(3), 205–225.
Kasperski, M. (2003). “Specification of the design wind load based on wind tunnel experiments.” J. Wind. Eng. Ind. Aerodyn., 91, 527–541.
Kasperski, M. (2007a). “Design wind loads for a low-rise building taking into account directional effects.” J. Wind. Eng. Ind. Aerodyn., 95, 1125–1144.
Kasperski, M. (2007b). “Specification of the design wind load—A critical review of code concepts.” Proc., 12th Int. Conf. Wind Eng. (ICWE12), Australasian Wind Energy Society, Cairns, Australia.
Kotz, S., and Nadarajah, S. (2000). Extreme value distributions: Theory and applications, Imperial College Press, London.
Makkonen, L. (2008). “Problems in the extreme value analysis.” Struct. Safety, 30, 405–419.
Minciarelli, F., Gioffre, M., Grigoriu, M., and Simiu, E. (2001). “Estimates of extreme wind effects and wind load factors: Influence of knowledge uncertainties.” Probab. Eng. Mech., 16, 331–340.
Naess, A. (1998). “Estimation of long return period design values for wind speeds.” J. Eng. Mech., 124(3), 252–259.
Naess, A., and Gaidai, O. (2009). “Estimation of extreme values from sampled time series.” Struct. Safety, 31, 325–334.
Simiu, E., and Heckert, N. A. (1996). “Extreme wind distribution tails: A ‘peak over threshold’ approach.” J. Struct. Eng., 122(5), 539–547.
Simiu, E., Heckert, N. A., Filliben, J. J., and Johnson, S. K. (2001). “Extreme wind load estimates based on the Gumbel distribution of dynamic pressures: An assessment.” Struct. Safety, 23, 221–229.
Simiu, E., and Scanlan, R. H. (1996). Wind effects on structures: Fundamentals and applications to design, 3rd Ed., Wiley, New York.
van der Hoven, I. (1957). “Power spectrum of horizontal wind speed in the frequency range from 0.0007 to 900 cycles per hour.” J. Meteorol., 14, 160–164.
Information & Authors
Information
Published In
Copyright
© 2010 ASCE.
History
Received: Dec 2, 2008
Accepted: Nov 11, 2009
Published online: Nov 13, 2009
Published in print: Jun 2010
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.