Efficient Meshfree Computation with Fast Treatment of Essential Boundary Conditions for Industrial Applications
Publication: Journal of Engineering Mechanics
Volume 135, Issue 10
Abstract
This paper presents a fast treatment of essential boundary conditions in three-dimensional (3D) meshfree computation for computational efficiency. Due to the loss of Kronecker delta properties in the meshfree shape functions, the imposition of essential boundary conditions is tedious, especially in 3D applications. The proposed boundary singular kernel (BSK) method introduces singularities to the kernel functions associated with the essential and kinematically constrained boundary nodes so that the corresponding coefficients of the singular kernel shape functions recover nodal values, and consequently constraints can be imposed directly. In this work, the recovery of nodal value properties on essential boundary nodes is proved for general -dimensional geometries. The extension of previously proposed two-dimensional BSK method to 3D formulation thus becomes straightforward, and essential boundary treatment consumes almost no additional cost to meshfree computation and makes the method affordable for industrial applications. The effectiveness of the proposed method is demonstrated in 3D metal forming examples.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
D. Wang is supported by the National Natural Science Foundation of China under Grant No. NNSFC10602049 and the Program for New Century Excellent Talents in Fujian Province University of China. This support is gratefully acknowledged.
References
Areias, P., and Belytschko, T. (2006). “Analysis of finite strain anisotropic elastoplastic fracture in thin plates and shells.” J. Aerosp. Eng., 19, 259–270.
Babuska, I., and Melenk, J. M. (1997). “The partition of unity method.” Int. J. Numer. Methods Eng., 40, 727–758.
Belytschko, T., Lu, Y. Y., and Gu, L. (1994). “Element-free Galerkin methods.” Int. J. Numer. Methods Eng., 37, 229–256.
Chen, J. S., Hu, W., and Hu, H. Y. (2008). “Reproducing kernel enhanced local radial basis collocation method.” Int. J. Numer. Methods Eng., 75, 600–627.
Chen, J. S., Pan, C., Roque, C., and Wang, H. P. (1998). “A Lagrangian reproducing kernel particle method for metal forming analysis.” Comput. Mech., 22, 289–307.
Chen, J. S., Pan, C., Wu, C. T., and Liu, W. K. (1996). “Reproducing kernel particle methods for large deformation analysis of nonlinear structures.” Comput. Methods Appl. Mech. Eng., 139, 195–227.
Chen, J. S., and Wang, H. P. (2000). “New boundary condition treatments in meshfree computation of contact problems.” Comput. Methods Appl. Mech. Eng., 187, 441–468.
Chen, J. S., Wang, H. P., Yoon, S., and You, Y. (2000). “Some recent improvements in meshfree methods for the incompressible finite elasticity boundary value problems with contact.” Comput. Mech., 25, 137–156.
Choudhry, S., and Lee, J. K. (1994). “Dynamic plane-strain element simulation of industrial sheet-metal forming processes.” Int. J. Mech. Sci., 36, 189–207.
Duarte, C. A., and Oden, J. T. (1996). “A hp adaptive method using clouds.” Comput. Methods Appl. Mech. Eng., 139, 237–262.
Gunther, F., and Liu, W. K. (1998). “Implementation of boundary conditions for meshless methods.” Comput. Methods Appl. Mech. Eng., 163, 205–230.
Han, W., and Meng, X. (2001). “Error analysis of the reproducing kernel particle method.” Comput. Methods Appl. Mech. Eng., 190, 6157–6181.
Huerta, A., and Fernández-Méndez, S. (2000). “Enrichment and coupling of the finite element and meshless methods.” Int. J. Numer. Methods Eng., 48, 1615–1636.
Kaljevic, I., and Saigal, S. (1997). “An improved element free Galerkin formulation.” Int. J. Numer. Methods Eng., 40, 2953–2974.
Krongauz, Y., and Belytschko, T. (1996). “Enforcement of essential boundary conditions in meshless approximations using finite elements.” Comput. Methods Appl. Mech. Eng., 131, 133–145.
Lancaster, P., and Salkauskas, K. (1981). “Surfaces generated by moving least squares methods.” Math. Comput., 37, 141–158.
Li, S., and Liu, W. K. (2002). “Meshfree and particle methods and their applications.” Appl. Mech. Rev., 55, 1–34.
Liu, W. K., Jun, S., and Zhang, Y. F. (1995). “Reproducing kernel particle methods.” Int. J. Numer. Methods Fluids, 20, 1081–1106.
Lu, Y. Y., Belytschko, T., and Gu, L. (1994). “A new implementation of the element free Galerkin method.” Comput. Methods Appl. Mech. Eng., 113, 397–414.
Nayroles, B., Touzot, G., and Villon, P. (1992). “Generalizing the finite element method: Diffuse approximation and diffuse elements.” Comput. Mech., 10, 307–318.
Wagner, G. J., and Liu, W. K. (2001). “Hierarchical enrichment for bridging scales and meshfree boundary conditions.” Int. J. Numer. Methods Eng., 50, 507–524.
Wang, D., and Chen, J. S. (2008). “A hermite reproducing kernel approximation for thin plate analysis with sub-domain stabilized conforming integration.” Int. J. Numer. Methods Eng., 74, 368–390.
Wang, H. P. (2000). “Meshfree smooth contact formulation and boundary condition treatments in multibody contact.” Ph.D. thesis, Univ. of Iowa, Iowa City, Iowa.
Zhu, T., and Atluri, S. N. (1998). “A modified collocation method and a penalty formulation for enforcing the essential boundary conditions in the element free Galerkin method.” Comput. Mech., 21, 211–222.
Information & Authors
Information
Published In
Copyright
© 2009 ASCE.
History
Received: Oct 27, 2008
Accepted: Feb 2, 2009
Published online: Mar 6, 2009
Published in print: Oct 2009
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.