Motivations of Program Partners for Environmental Sustainability and Persistence of Benefits
Publication: Journal of Professional Issues in Engineering Education and Practice
Volume 141, Issue 2
Abstract
It is becoming more common for sustainability-related engineering classes to engage in various forms of service and project learning activities that provide assistance to partners. However, few efforts have examined the relationship between the types of partners and the motivations for implementation of the sustainability recommendations to provide a larger context to students. The partners in pollution prevention program at the University of Nebraska–Lincoln completed an analysis of past partners and found that those in the manufacturing sector were more likely to provide direct financial savings justifications for pollution prevention and sustainability implementation, whereas the public institutions and other businesses were more likely to also cite social factors. An analysis of implemented recommendations found that there was a wide variation in implementation rates and the frequency with which benefits persisted beyond one year for different categories of implemented recommendations. For example, preventative maintenance recommendations had the highest rate of implementation and persistence of benefits, whereas off-site recycling recommendations had a relatively low rate of benefit persistence.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The P3 program has been funded by grants from the U.S. Environmental Protection Agency, Nebraska Department of Environmental Quality, and individual businesses. The opinions expressed are solely the responsibility of the authors and do not necessarily represent the official views of the funding agencies. The authors express special thanks to Bob Walters for his assistance in finalizing this manuscript.
References
Aurandt, J., Borchers, A. S., Lynch-Caris, T., El-Sayed, J., and Hoff, C. (2012). “Bringing environmental sustainability to undergraduate engineering education: Experiences in an inter-disciplinary course.” J. STEM Educ., 13(2), 15–25.
Bielefeldt, A., et al. (2010). “Evolution of a sustainability focused first-year environmental engineering course.” American Society for Engineering Education (ASEE) Annual Conf. and Exposition Proc., Environmental Division, Louisville, KY.
Bielefeldt, A. (2013). “Pedagogies to achieve sustainability learning outcomes in civil and environmental engineering students.” Sustainability, 5(10), 4479–4501.
CH2M HILL. (2013). “Sustainability goals that make an impact.”, Englewood, CO.
Dvorak, B. I., Hygnstrom, J. R., Youngblood, D. J., Woldt, W. E., and Hawkey, S. (2008). “Lessons learned concerning impact assessment: Pollution prevention technical assistance in Nebraska.” J. Cleaner Prod., 16(6), 751–760.
Dvorak, B. I., Stewart, B. A., Hosni, A. A., Hawkey, S. A., and Nelsen, V. (2011). “Case study in intensive environmental sustainability education: Long-term impacts on workplace behavior.” J. Prof. Issues Eng. Educ. Pract., 113–120.
Granek, F., and Hassanali, M. (2006). “The Toronto region sustainability program: Insights on the adoption of pollution prevention practices by small to medium-sized manufacturers in the greater Toronto Area (GTA).” J. Cleaner Prod., 14(6–7), 572–579.
Hawkey, S. A., Nelsen, V., and Dvorak, B. I. (2012). “Using a multi-level approach to teach sustainability to undergraduates.” Teaching sustainability and teaching sustainably in higher education, K. A. Bartels and K. A. Parker, eds., Stylus Publishing, Sterling, VA, 115–126.
Hoof, B., and Lyon, T. P. (2013). “Cleaner production in small firms taking part in Mexico’s sustainable supplier program.” J. Cleaner Prod., 41(30), 270–282.
Huppe, F., Turgeon, R., Ryan, T., and Vanasse, C. (2006). “Fostering pollution prevention in small businesses: The enviroclub initiative.” J. Cleaner Prod., 14(6–7), 563–571.
Institute for Digital Research and Education (IDRE). (2013). “Statistical analyses using SAS.” Univ. of California, Los Angeles 〈http://www.ats.ucla.edu/stat/sas/whatstat/whatstat.html〉 (Oct. 10, 2013).
Kekilova, A. A. (2013). “Business motivations for implementing sustainability focused projects: P3 program—Lessons learned.” M.S. thesis, Univ. of Nebraska–Lincoln, Lincoln, NE.
Labodová, A., Lapcík, V., Kodymová, J., Turjak, J., and Pivko, M. (2014). “Sustainability teaching at VSB e Technical Univ. of Ostrava.” J. Cleaner Prod., 62(1), 128–133.
Massachusetts Institute of Technology (MIT). (2011). “MIT sloan management review. Sustainability: The “Embracers” seize advantage.” Research Rep., North Hollywood, CA.
Padmanabhan, G., and Katti, D. (2002). “Using community-based projects in civil engineering capstone courses.” J. Prof. Issues Eng. Edu. Pract., 12–18.
PricewaterhouseCoopers (PWC). (2013). “Measuring and managing total impact: A new language for business decisions.” 〈http://pwc.blogs.com/files/measuring-and-managing-total-impact-230913.pdf〉 (Sep. 30, 2013).
Ramírez, M., Bengo, I., Mereu, R., Bejarano, R., and Silva, J. (2011). “Participative methodology for local development: The contribution of engineers without borders from Italy and Colombia: Towards the improvement of water quality in vulnerable communities.” Syst. Pract. Action Res., 24, 45–66.
Steinemann, A. (2003). “Implementing sustainable development through problem-based learning: Pedagogy and practice.” J. Prof. Issues Eng. Edu. Pract., 216–224.
United Nations Education, Scientific, and Cultural Organization (UNESCO). (2013). “Education.” Education for Sustainable Development (ESD), 〈http://www.unesco.org/new/en/education/themes/leading-the-international-agenda/education-for-sustainable-development/〉 (Oct. 23, 2013).
U.S. Department of Labor (USDL). (2012). “Green technologies and practices—August 2011.”, Washington, DC.
Watson, A. (2013). “Green technologies and practices: A visual essay.” Mon. Labor Rev., 136(1), 36–48.
Youngblood, D. J., Dvorak, B. I., and Hawkey, S. (2008a). “Indirect benefits of P2 technical assistance estimated using fuzzy set theory.” J. Cleaner Prod., 16(6), 771–779.
Youngblood, D. J., Dvorak, B. I., Woldt, W. E., Hawkey, S., and Hygnstrom, J. R. (2008b). “Quantifying and comparing a P2 program’s benefits: Pollution prevention technical assistance in Nebraska.” J. Cleaner Prod., 16(6), 761–770.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Dec 19, 2013
Accepted: Jun 12, 2014
Published online: Jul 15, 2014
Discussion open until: Dec 15, 2014
Published in print: Apr 1, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.