Chitosan-Based Silver Nanocomposite for Hexavalent-Chromium Removal from Tannery Industry Effluent Using a Packed-Bed Reactor
Publication: Journal of Environmental Engineering
Volume 146, Issue 6
Abstract
Chitosan-based silver nanocomposite beads were synthesized through the facile chemical precipitation method, and its efficiency was evaluated for removal of hexavalent chromium from synthetic and tannery industrial effluents in a packed bed reactor. The developed silver nanocomposite has been characterized through Fourier transform infrared spectroscopy (FTIR) and Brunauer-Emmett-Teller (BET) analysis. The effect of various process parameters, such as residence time (3–7 h), initial Cr (VI) concentration (10–30 ppm), silver nanocomposite dosage (), and flow rate (), was investigated using synthetic effluent. Silver nanocomposite has the BET surface area and porosity of and 88%, respectively. Maximum Cr (VI) removal was achieved with a residence time of 5 h, initial Cr (VI) concentration of 20 ppm, silver nanocomposite dosage of , and flow rate of . The results exhibited that an increase in initial chromium concentration, the amount of bead, and residence time increased the efficiency of chromium removal, whereas an increase in the flow rate decreased sorption efficiency. Further, the evaluated process parameters exhibited almost 90% of Cr (VI) elimination from tannery industrial effluent [initial Cr (VI) concentration of 20 ppm] in a packed bed reactor. The study revealed that synthesized silver nanocomposite could be used as a potential sorbent for hexavalent chromium removal from synthetic and industrial effluents.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated and used during the study appear in the published article.
Acknowledgments
The authors thank Professor M. Sivanandham, Secretary, Sri Venkateswara Educational and Health Trust, and Sri Venkateswara College of Engineering and Vellore Institute of Technology University, Tamil Nadu, for the support. The authors also thank Ms. R. Rathna, Ms. R. Viveka, and Mr. Aswin Jeno JG of Sri Venkateswara College of Engineering for their assistance.
References
Abdulla, H. M., E. M. Kamal, A. H. Mohamed, and A. D. El-Bassuony. 2010. “Chromium removal from tannery wastewater using chemical and biological techniques aiming zero discharge of pollution.” In Proc., 5th Scientific Environmental Conf., 171–183. Ash Sharqia Governorate, Egypt: Zagazig Univ.
Ahmaruzzaman, M., and V. K. Gupta. 2011. “Rice husk and its ash as low-cost adsorbents in water and wastewater treatment.” Ind. Eng. Chem. Res. 50 (24): 13589–13613. https://doi.org/10.1021/ie201477c.
Akpomie, K. G., F. A. Dawodu, and K. O. Adebowale. 2015. “Mechanism on the sorption of heavy metals from binary-solution by a low cost montmorillonite and its desorption potential.” Alexandria. Eng. J. 54 (3): 757–767. https://doi.org/10.1016/j.aej.2015.03.025.
Ali Khan, S., S. Bahadar Khan, T. M. Kamal, A. Asiri, and K. Akhtar. 2016. “Recent development of chitosan nanocomposites for environmental applications.” Recent. Pat. Nanotechnol. 10 (3): 181–188. https://doi.org/10.2174/1872210510666160429145339.
Arabi, M., M. Ghaedi, and A. Ostovan. 2016. “Development of dummy molecularly imprinted based on functionalized silica nanoparticles for determination of acrylamide in processed food by matrix solid phase dispersion.” Food Chem. 210 (Nov): 78–84. https://doi.org/10.1016/j.foodchem.2016.04.080.
Aravindhan, R., B. Madhan, J. R. Rao, B. U. Nair, and T. Ramasami. 2004. “Bioaccumulation of chromium from tannery wastewater: An approach for chrome recovery and reuse.” Environ. Sci. Technol. 38 (1): 300–306.
Asfaram, A., M. Ghaedi, S. Agarwal, I. Tyagi, and V. K. Gupta. 2015. “Removal of basic dye Auramine-O by ZnS: Cu nanoparticles loaded on activated carbon: Optimization of parameters using response surface methodology with central composite design.” RSC Adv. 5 (24): 18438–18450. https://doi.org/10.1039/C4RA15637D.
Baral, S. S., N. Das, T. S. Ramulu, S. K. Sahoo, S. N. Das, and G. R. Chaudhury. 2009. “Removal of Cr (VI) by thermally activated weed Salvinia cucullata in a fixed-bed column.” J. Hazard. Mater. 161 (2–3): 1427–1435. https://doi.org/10.1016/j.jhazmat.2008.04.127.
Barsbay, M., P. A. Kavaklı, S. Tilki, C. Kavaklı, and O. Güven. 2018. “Porous cellulosic adsorbent for the removal of Cd (II), Pb (II) and Cu (II) ions from aqueous media.” Radiat. Phys. Chem. 142 (Jan): 70–76. https://doi.org/10.1016/j.radphyschem.2017.03.037.
Boddu, V. M., K. Abburi, J. L. Talbott, and E. D. Smith. 2003. “Removal of hexavalent chromium from wastewater using a new composite chitosan biosorbent.” Environ. Sci. Technol. 37 (19): 4449–4456. https://doi.org/10.1021/es021013a.
Cárdenas-González, M., et al. 2016. “Environmental exposure to arsenic and chromium in children is associated with kidney injury molecule-1.” Environ. Res. 150 (Oct): 653–662. https://doi.org/10.1016/j.envres.2016.06.032.
Cavalcante, D. G., A. S. Gomes, R. J. Santos, L. E. Kerche-Silva, C. S. Danna, E. Yoshihara, and A. E. Job. 2018. “Composites produced from natural rubber and chrome-tanned leather wastes: Evaluation of their in vitro toxicological effects for application in footwear and textile industries.” J. Polym. Environ. 26 (3): 980–988. https://doi.org/10.1007/s10924-017-1002-9.
Chittoo, B. S., and C. Sutherland. 2019. “Adsorption using lime-iron sludge–encapsulated calcium alginate beads for phosphate recovery with ANN- and RSM-optimized encapsulation.” J. Env. Eng. 145 (5): 04019019. https://doi.org/10.1061/(ASCE)EE.1943-7870.0001519.
Costa, M., and C. B. Klein. 2006. “Toxicity and carcinogenicity of chromium compounds in humans.” Crit. Rev. Toxicol. 36 (2) 155–163. https://doi.org/10.1080/10408440500534032.
Dongre, R. S. 2016. “Adsorption of hexavalent chromium by graphite–chitosan binary composite.” Bull. Mater. Sci. 39: 865–874. https://doi.org/10.1007/s12034-016-1200-4.
Duan, B., C. Dong, X. Yuan, and K. Yao. 2004. “Electrospinning of chitosan solutions in acetic acid with poly (ethylene oxide).” J. Biomater. Sci. Polym. Ed. 15 (6): 797–811. https://doi.org/10.1163/156856204774196171.
El-Hefian, E. A., M. M. Nasef, and A. H. Yahaya. 2010. “The preparation and characterization of chitosan/poly (vinyl alcohol) blended films.” J. Chem. 7 (4): 1212–1219. https://doi.org/10.1155/2010/626235.
Gupta, V. K., I. Ali, T. A. Saleh, M. N. Siddiqui, and S. Agarwal. 2013. “Chromium removal from water by activated carbon developed from waste rubber tires.” Environ. Sci. Pollut. Res. 20 (3): 1261–1268. https://doi.org/10.1007/s11356-012-0950-9.
Gupta, V. K., A. Nayak, and S. Agarwal. 2015. “Bioadsorbents for remediation of heavy metals: Current status and their future prospects.” Environ. Eng. Res. 20 (1): 1–18. https://doi.org/10.4491/eer.2015.018.
Han, R., L. Zou, X. Zhao, Y. Xu, F. Xu, Y. Li, and Y. Wang. 2009. “Characterization and properties of iron oxide-coated zeolite as adsorbent for removal of copper (II) from solution in fixed bed column.” Chem. Eng. J. 149 (1–3): 123–131. https://doi.org/10.1016/j.cej.2008.10.015.
Hassoune, J., S. Tahiri, M. E. Krati, M. L. Cervera, and M. Guardia. 2018. “Removal of hexavalent chromium from aqueous solutions using biopolymers.” J. Env. Eng. 144 (8). https://doi.org/10.1061/(ASCE)EE.1943-7870.0001396.
Hedberg, Y. S., B. Erfani, M. Matura, and C. Lidén. 2018. “Chromium (III) release from chromium-tanned leather elicits allergic contact dermatitis: A use test study.” Contact. Derm. 78 (5): 307–314. https://doi.org/10.1111/cod.12946.
Isikli, B., T. Demir, S. M. Urer, A. Berber, T. Akar, and C. Kalyoncu. 2003. “Effects of chromium exposure from a cement factory.” Environ. Res. 91 (2): 113–118. https://doi.org/10.1016/S0013-9351(02)00020-8.
IS (Indian Standard). 2012. Specifications for drinking water. IS 10500. New Delhi, India: Bureau of Indian Standards.
Kabiraz, M. K., I. A. Jahan, S. M. Masum, M. M. Islam, S. M. Hassan, B. Saha, and H. P. Nur. 2015. “Effective removal of chromium (vi) ions from tannery effluent using chitosan-alumina composite.” Int. Res. J. Pure. Appl. Chem. 10 (3): 1–12. https://doi.org/10.9734/IRJPAC/2016/21856.
Kalaivani, S. S., T. Vidhyadevi, A. Murugesan, K. V. Thiruvengadaravi, D. Anuradha, S. Sivanesan, and L. Ravikuma. 2014. “The use of new modified poly (acrylamide) chelating resin with pendent benzothiazole groups containing donor atoms in the removal of heavy metal ions from aqueous solutions.” Water. Res. Ind. 5 (Mar) 21–35. https://doi.org/10.1016/j.wri.2014.04.001.
Kumar, P. A., and S. Chakraborty. 2009. “Fixed-bed column study for hexavalent chromium removal and recovery by short-chain polyaniline synthesized on jute fiber.” J. Hazard. Mater. 162 (2–3): 1086–1098. https://doi.org/10.1016/j.jhazmat.2008.05.147.
Kumari, S., P. Rath, A. S. H. Kumar, and T. N. Tiwari. 2016. “Removal of hexavalent chromium using chitosan prepared from shrimp shells.” Afr. J. Biotechnol. 15 (3): 50–54. https://doi.org/10.5897/AJB2015.14990.
Kundu, S., and A. K. Gupta. 2005. “Analysis and modeling of fixed bed column operations on As (V) removal by adsorption onto iron oxide-coated cement (IOCC).” J. Colloid Interface Sci. 290 (1): 52–60. https://doi.org/10.1016/j.jcis.2005.04.006.
Kyzas, G. Z., and D. N. Bikiaris. 2015. “Recent modifications of chitosan for adsorption applications: A critical and systematic review.” Mar. Drugs 13 (1): 312–337. https://doi.org/10.3390/md13010312.
Labied, R., O. Benturki, A. Y. Eddine Hamitouche, and A. Donnot. 2018. “Adsorption of hexavalent chromium by activated carbon obtained from a waste lignocellulosic material (Ziziphus jujuba cores): Kinetic, equilibrium, and thermodynamic study.” Adsorpt. Sci. Technol. 36 (3–4) 1066–1099. https://doi.org/10.1177/0263617417750739.
Li, L., Y. Li, L. Cao, and C. Yang. 2015. “Enhanced chromium (VI) adsorption using nanosized chitosan fibers tailored by electrospinning.” Carbohydr. Polym. 125 (Jul): 206–213. https://doi.org/10.1016/j.carbpol.2015.02.037.
Mishima, K., X. Du, S. Sekiguchi, and N. Kano. 2017. “Experimental and theoretical studies on the adsorption and desorption mechanisms of chromate ions on cross-linked chitosan.” J. Funct. Biomater. 8 (4): 51. https://doi.org/10.3390/jfb8040051.
Miyabe, K., and G. Guiochon. 1999. “Kinetic study of the concentration dependence of the mass transfer rate coefficient in anion-exchange chromatography of bovine serum albumin.” Biotechnol. Progr. 15 (4): 740–752. https://doi.org/10.1021/bp990062x.
Mohan, D., and C. U. Pittman, Jr. 2006. “Activated carbons and low cost adsorbents for remediation of tri- and hexavalent chromium from water.” J. Hazard. Mater. 137 (2): 762–811.
Mohanty, S. R. 2015. “Removal of hexavalent chromium using Chitosan prepared from the shrimp and crab shells.” Dissertation, Dept. of Chemical Engineering, National Institute of Technology Rourkela.
Mottalib, A. M., S. H. Somoal, S. M. Islam, M. N. Alam, and M. N. Abser. 2015. “Removal of chromium from tannery wastewater by tannery lime liquor: A very cost effective method.” Int. J. Curr. Res. 7 (6): 16795–16798.
Mulfinger, L., S. D. Solomon, M. Bahadory, A. V. Jeyarajasingam, S. A. Rutkowsky, and C. Boritz. 2007. “Synthesis and study of silver nanoparticles.” J. Chem. Educ. 84 (2): 322. https://doi.org/10.1021/ed084p322.
Nakkeeran, E., S. J. Varjani, V. Dixit, and A. Kalaiselvi. 2018. “Synthesis, characterization and application of zinc oxide nanocomposite for dye removal from textile industrial wastewater.” Ind. J. Exp. Biol. 56 (Jul): 498–503.
Ngah, W. W., L. C. Teong, and M. A. K. M. Hanafiah. 2011. “Adsorption of dyes and heavy metal ions by chitosan composites: A review.” Carbohydr. Polym. 83 (4): 1446–1456. https://doi.org/10.1016/j.carbpol.2010.11.004.
Ostovan, A., M. Ghaedi, M. Arabi, and A. Asfaram. 2017. “Hollow porous molecularly imprinted polymer for highly selective clean-up followed by influential preconcentration of ultra-trace glibenclamide from bio-fluid.” J. Chromatogr. A 1520 (Oct): 65–74. https://doi.org/10.1016/j.chroma.2017.09.026.
Özdemir, Ö. T. 2018. “FT-IR, laser-Raman, UV-Vis, and NMR spectroscopic studies of antidiabetic molecule nateglinide.” J. Spectrosc. 1–12. https://doi.org/10.1155/2018/8573014.
Pani, J. P., R. Singh, and S. Singh. 2018. “Characterization of polyvinyl pyrollidone coated sodium borohydride stabilized particle colloidal silver fresh none filtered and nano filtered solution made up of magnetic stirring and cooling method.” World. J. Nano. Sci. Eng. 8 (1): 1. https://doi.org/10.4236/wjnse.2018.81001.
Rajbanshi, K., R. Bajracharya, A. Shrestha, and P. Thapa. 2014. “Dissolution enhancement of aceclofenac tablet by solid dispersion technique.” J. Pharm. Drug Deliv. Res. 5 (4): 27–139. https://doi.org/10.4172/2325-9604.C1.015.
Rathna, R., S. Varjani, and E. Nakkeeran. 2018. “Recent developments and prospects of dioxins and furans remediation.” J. Environ. Manage. 223 (Oct): 797–806. https://doi.org/10.1016/j.jenvman.2018.06.095.
Sampaio, C. D. G., L. S. Frota, H. S. Magalhães, L. M. Dutra, D. C. Queiroz, R. S. Araújo, H. Becker, J. R. de Souza, N. M. Ricardo, and M. T. Trevisan. 2015. “Chitosan/mangiferin particles for Cr (VI) reduction and removal.” Int. J. Biol. Macromol. 78 (Jul): 273–279. https://doi.org/10.1016/j.ijbiomac.2015.03.038.
Sampath, M., C. G. K. Daniel, V. Suresh Kumar, M. Sivakumar, and S. Balasubramanian. 2014. “Chitosan-based polymer nanocomposites for heavy metal removal.” In Nanocomposites in wastewater treatment, edited by A. K. Mishra, 14–35. Singapore: Pan Stanford.
Saravanan, R., N. Karthikeyan, V. K. Gupta, E. Thirumal, P. Thangadurai, V. Narayanan, and A. Stephen. 2013. “ZnO/Ag nanocomposite: An efficient catalyst for degradation studies of textile effluents under visible light.” Mater. Sci. Eng. C 33 (4): 2235–2244. https://doi.org/10.1016/j.msec.2013.01.046.
Shakya, M., P. Sharma, S. S. Meryem, Q. Mahmood, and A. Kumar. 2016. “Heavy metal removal from industrial wastewater using fungi: Uptake mechanism and biochemical aspects.” J. Env. Eng. 142 (9): C6015001. https://doi.org/10.1061/(ASCE)EE.1943-7870.0000983.
Siraj, S., M. M. Islam, P. C. Das, S. M. Masum, I. A. Jahan, and M. Shajahan. 2012. “Removal of chromium from tannery effluent using chitosan-charcoal composite.” J. Bangladesh Chem. Soc. 25 (1): 53–61. https://doi.org/10.3329/jbcs.v25i1.11774.
Sirusbakht, S., L. Vafajoo, S. Soltani, and S. Habibi. 2018. “Sawdust bio sorption of chromium (VI) ions from aqueous solutions.” Chem. Eng. Trans. 70 (Aug): 1147–1152. https://doi.org/10.3303/CET1870192.
Tarley, C. R. T., and M. A. Z. Arruda. 2004. “Biosorption of heavy metals using rice milling by-products. Characterisation and application for removal of metals from aqueous effluents.” Chemosphere 54 (7): 987–995. https://doi.org/10.1016/j.chemosphere.2003.09.001.
USEPA. 1992. “Method 7196A chromium, hexavalent (Colorimetric).” Accessed July 1, 1992. https://www.epa.gov/sites/production/files/2015-12/documents/7196a.pdf.
Vakili, M., S. Deng, T. Li, W. Wang, and G. Yu. 2018. “Novel crosslinked chitosan for enhanced adsorption of hexavalent chromium in acidic solution.” J. Chem. Eng. 347 (Sep): 782–790. https://doi.org/10.1016/j.cej.2018.04.181.
Varjani, S. J. 2017. “Microbial degradation of petroleum hydrocarbons.” Bioresour. Technol. 223 (Jan): 277–286. https://doi.org/10.1016/j.biortech.2016.10.037.
Varjani, S. J., and V. N. Upasani. 2017. “A new look on factors affecting microbial degradation of petroleum hydrocarbon pollutants.” Int. Biodeterior. Biodegradation 120 (May): 71–83. https://doi.org/10.1016/j.ibiod.2017.02.006.
Vikrant, K., and K. H. Kim. 2019. “Nanomaterials for the adsorptive treatment of Hg (II) ions from water.” J. Chem. Eng. 358 (Feb): 264–282. https://doi.org/10.1016/j.cej.2018.10.022.
Wei, W., Q. Wang, A. Li, J. Yang, F. Ma, S. Pi, and D. Wu. 2016. “Biosorption of Pb (II) from aqueous solution by extracellular polymeric substances extracted from Klebsiella sp. J1: Adsorption behavior and mechanism assessment.” Sci. Rep. 6 (Aug): 31575. https://doi.org/10.1038/srep31575.
White, L. R., K. Jakobsen, and K. Ostgaard. 1979. “Comparative toxicity studies of chromium-rich welding fumes and chromium on an established human cell line.” Environ. Res. 20 (2): 366–374. https://doi.org/10.1016/0013-9351(79)90013-6.
Yacou, C., S. Altenor, B. Carene, and S. Gaspard. 2018. “Chemical structure investigation of tropical Turbinaria turbinata seaweeds and its derived carbon sorbents applied for the removal of hexavalent chromium in water.” Algal. Res. 34 (Sep): 25–36. https://doi.org/10.1016/j.algal.2018.06.014.
Yang, S. Y., J. M. Lin, W. Y. Lin, and C. W. Chang. 2018. “Cancer risk assessment for occupational exposure to chromium and nickel in welding fumes from pipeline construction, pressure container manufacturing, and shipyard building in Taiwan.” J. Occup. Health 60 (6): 515–524. https://doi.org/10.1539/joh.2018-0075-FS.
Zhang, X., Q. Lei, X. Wang, J. Liang, C. Chen, H. Luo, H. Mou, Q. Deng, T. Zhang, and J. Jiang. 2019. “Removal of Cr (III) using humic acid–modified attapulgite.” J. Env. Eng. 145 (6): 04019028. https://doi.org/10.1061/(ASCE)EE.1943-7870.0001541.
Zhao, G., X. Huang, Z. Tang, Q. Huang, F. Niu, and X. K. Wang. 2018. “Polymer-based nanocomposites for heavy metal ions removal from aqueous solution: A review.” Polym. Chem. 9 (26): 3562–3582. https://doi.org/10.1039/C8PY00484F.
Zhao, M., J. R. Duncan, and R. P. Van Hille. 1999. “Removal and recovery of zinc from solution and electroplating effluent using Azolla filiculoides.” Water Res. 33 (6): 1516–1522. https://doi.org/10.1016/S0043-1354(98)00338-8.
Information & Authors
Information
Published In
Copyright
©2020 American Society of Civil Engineers.
History
Received: May 30, 2019
Accepted: Nov 19, 2019
Published online: Mar 24, 2020
Published in print: Jun 1, 2020
Discussion open until: Aug 24, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.