Oxygen Transfer Rate and Oxygen Uptake Rate in Subsurface Bubble Aeration Systems
Publication: Journal of Environmental Engineering
Volume 146, Issue 1
Abstract
Forum papers are thought-provoking opinion pieces or essays founded in fact, sometimes containing speculation, on a civil engineering topic of general interest and relevance to the readership of the journal. The views expressed in this Forum article do not necessarily reflect the views of ASCE or the Editorial Board of the journal.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code generated or used during the study are available from the corresponding author by request as listed below:
•
Jing Hu’s experiments [2006]
•
Mahendraker’s experiments [2003]
•
Garcia et al.’s experiments [2009, 2010]
•
Yunt et al.’s test data [1980]
References
Ahlert, R. C. 1997. “Process dynamics in environmental systems.” Environ. Prog. 16 (1): S6–S7. https://doi.org/10.1002/ep.3300160107.
ASCE. 1997. Standard guidelines for in-process oxygen transfer testing, 18–96. Reston, VA: ASCE.
ASCE. 2007. Standard 2-06: Measurement of oxygen transfer in clean water. Reston, VA: ASCE.
Baillod, C. R. 1979. “Review of oxygen transfer model refinements and data interpretation.” In Proc., Workshop Toward an Oxygen Transfer Standard, edited by W. C. Boyle, 17–26. Cincinnati: USEPA.
Baquero-Rodriguez, G. A., J. A. Lara-Berrero, N. Daniel, and R. Diego. 2018. “A critical review of the factors affecting modeling oxygen transfer by fine-pore diffusers in activated sludge.” Water Environ. Res. 90 (5): 431–441. https://doi.org/10.2175/106143017X15131012152988.
Boon Arthur, G. 1979. “Oxygen transfer in the activated-sludge process.” In Proc., Workshop Toward an Oxygen Transfer Standard, edited by W. C. Boyle, 17–26. Cincinnati: USEPA.
Garcia-Ochoa, F., and E. Gomez. 2009. “Bioreactor scale-up and oxygen transfer rate in microbial processes: An overview.” Biotechnol. Adv. 27 (2): 153–176. https://doi.org/10.1016/j.biotechadv.2008.10.006.
Garcia-Ochoa, F., E. Gomez, and J. C. Merchuk. 2010. “Oxygen uptake rate in microbial processes: An overview.” Biochem. Eng. J. 49 (3): 289–307. https://doi.org/10.1016/j.bej.2010.01.011.
Hu, J. 2006. “Evaluation of parameters influencing oxygen transfer efficiency in a membrane bioreactor.” Ph.D. dissertation, Dept. of Civil Engineering, Univ. of Hawaii at Manoa.
Hwang, H. J., and M. K. Stenstrom. 1985. “Evaluation of fine-bubble alpha factors in near full-scale equipment.” J. (Water Pollut. Control Fed.) 57 (12): 1142–1151.
Lee, J. 2017. “Development of a model to determine mass transfer coefficient and oxygen solubility in bioreactors.” Heliyon 3 (2): e00248. https://doi.org/10.1016/j.heliyon.2017.e00248.
Lee, J. 2018. “Development of a model to determine the baseline mass transfer coefficients in aeration tanks.” Water Environ. Res. 90 (12): 2126–2140. https://doi.org/10.2175/106143017X15131012187999.
Lewis, W. K., and W. G. Whitman. 1924. “Principles of gas absorption.” Ind. Eng. Chem. 16 (12): 1215–1220. https://doi.org/10.1021/ie50180a002.
Mahendraker, V. 2003. “Development of a unified theory of oxygen transfer in activated sludge processes—The concept of net respiration rate flux.” Ph.D. thesis, Dept. of Civil Engineering, Univ. of British Columbia.
Mahendraker, V., D. S. Mavinic, and B. Rabinowitz. 2005a. “Comparison of oxygen transfer test parameters from four testing methods in three activated sludge processes.” Water Qual. Res. J. 40 (2): 164–176. https://doi.org/10.2166/wqrj.2005.019.
Mahendraker, V., D. S. Mavinic, and B. Rabinowitz. 2005b. “A simple method to estimate the contribution of biological floc and reactor-solution to mass transfer of oxygen in activated sludge processes.” Biotechnol. Bioeng. 91 (4): 393–405. https://doi.org/10.1002/bit.20515.
McCarthy, J. 1982. Technology assessment of fine bubble aerators. Washington, DC: USEPA.
McKinney, R. E., and J. R. Stukenberg. 1979. “On-site evaluation: Steady state versus non-steady state testing.” In Proc., Workshop Toward an Oxygen Transfer Standard, edited by W. C. Boyle, 17–26. Cincinnati: USEPA.
Metcalf and Eddy. 1985. Wastewater engineering: Treatment and disposal. 2nd ed. New York: McGraw-Hill.
Pan, J., and M. K. Stenstrom. 2012. “Oxygen transfer parameter estimation: Impact of methodology.” J. Environ. Eng. 138 (2): 137–142. https://doi.org/10.1061/(ASCE)EE.1943-7870.0000456.
Rosso, D., J. Lu-Man, G.-B. Manel, N. Daniel, A.-O. Ahmed, H. DeClippeleir, and M. Sudhir. 2017. “Modelling oxygen transfer using dynamic alpha factors.” Water Res. 124 (2017): 139–148. https://doi.org/10.1016/j.watres.2017.07.032.
Rosso, D., and M. K. Stenstrom. 2006a. “Alpha factors in full-scale wastewater aeration systems.” Proc. Water Environ. Fed. 2006 (7): 4853–4863. https://doi.org/10.2175/193864706783762940.
Rosso, D., and M. K. Stenstrom. 2006b. “Surfactant effects on -factors in aeration systems.” Water Res. 40 (7): 1397–1404. https://doi.org/10.1016/j.watres.2006.01.044.
Santos, V. E., C. Galdeano, E. Gomez, A. Alcon, and F. Garcia-Ochoa. 2006. “Oxygen uptake rate measurements both by the dynamic method and during the process growth of Rhodococcus erythropolis IGTS8: Modelling and difference in results.” Biochem. Eng. J. 32 (3): 198–204. https://doi.org/10.1016/j.bej.2006.09.025.
Shraddha, M., and N. Atul. 2018. “Quantifying the parametric sensitivity of ethanol production by Scheffersomyces (Pichia) stipitis: Development and verification of a method based on the principles of growth on mixtures of complementary substrates.” Microbiology 164 (11): 1348–1360. https://doi.org/10.1099/mic.0.000719.
Stenstrom, M. K., and R. G. Gilbert. 1981. “Effects of alpha, beta and theta factor upon the design, specification and operation of aeration systems.” Water Res. 15 (6): 643–654. https://doi.org/10.1016/0043-1354(81)90156-1.
Tchobanoglous, G., F. L. Burton, H. D. Stensel, and M. Eddy. 2003. Wastewater engineering: Treatment and reuse: McGraw-Hill series in civil and environmental engineering. 4th ed. New York: McGraw-Hill.
Yunt, F. W., and T. O. Hancuff. 1988. Project summary: Aeration equipment evaluation. Phase I: Clean water test results. Cincinnati: Water Engineering Research Laboratory.
Yunt, F. W., T. O. Hancuff, and R. C. Brenner. 1988. Aeration equipment evaluation. Phase 1: Clean water test results. Cincinnati: USEPA.
Information & Authors
Information
Published In
Copyright
©2019 American Society of Civil Engineers.
History
Received: Mar 31, 2019
Accepted: Jun 12, 2019
Published online: Oct 31, 2019
Published in print: Jan 1, 2020
Discussion open until: Mar 31, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.