Influence of Intrinsic Properties of Lignocellulosic Feedstock on Adsorptive Properties of Biochar
Publication: Journal of Environmental Engineering
Volume 144, Issue 9
Abstract
Biochar, which is rich in aromatic carbon and minerals, is a product of biomass pyrolysis at temperatures ranging from 350 to 1,000°C in oxygen-limited environments. In recent years, biochar has generated much interest in the field of water treatment in view of low production costs, availability of the feedstock (e.g., lignocellulosic biomass waste), and adsorptive properties. In this study, lignocellulosic feedstock from control and contaminated sites was pyrolyzed under 450°C for 2 h. The novelty of this study was consideration of the natural modifications of biochar and their influence on principal adsorptive characteristics of the biochar. The aim of this study was to determine the influence of intrinsic properties of lignocellulosic feedstock on adsorptive properties of biochar. Intrinsic properties of lignocellulosic feedstock, such as lignin, C, O, H, N, moisture and ash content, and Pb, Zn, Cu, Cr, Ni, Cd, Mg, and Fe concentrations, were analyzed. Adsorptive properties of biochar, such as cation exchange capacity (CEC), Brunauer–Emmett–Teller (BET) surface area, surface functionality, carbon, oxygen, hydrogen, nitrogen (COHN), moisture and ash content, and Pb, Zn, Cu, Cr, Ni, Cd, Mg, and Fe concentrations, were investigated. It was found that a larger amount of lignin (54–59%), ash (11.8–13.9%), nitrogen (0.4%), and Zn () and a lower carbon content (75–76%) in lignocellulosic feedstock may favor the adsorptive characteristics of biochar.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors thank the Research Council of Lithuania (Project No. VP1-3.1-ŠMM-01-V-03-001) the Institute of Environmental Protection (Vilnius, Lithuania), and the Latvian State Institute of Wood Chemistry (Riga, Latvia).
References
Ahmad, M., A. U. Rajapaksha, J. E. Lim, M. Zhang, N. Bolan, D. Mohan, M. Vithanage, S. S. Lee, and Y. S. Ok. 2014. “Biochar as a sorbent for contaminant management in soil and water: A review.” Chemosphere 99: 19–33. https://doi.org/10.1016/j.chemosphere.2013.10.071.
Ahmed, M. B., J. L. Zhou, H. H. Ngo, W. Guo, and M. Chen. 2016. “Progress in the preparation and application of modified biochar for improved contaminant removal from water and wastewater.” Bioresour. Technol. 214 (1): 836–851. https://doi.org/10.1016/j.biortech.2016.05.057.
ASTM. 2008. Standard test method for compressive strength of cylindrical concrete specimen. ASTM C39/C39M-05. West Conshohocken, PA: ASTM.
Babel, S., and T. A. Kurniawan. 2003. “Low-cost adsorbents for heavy metals uptake from contaminated water: A review.” J. Hazard. Mater. 97 (1): 219–243. https://doi.org/10.1016/S0304-3894(02)00263-7.
Baltrėnaitė, E., P. Baltrėnas, A. Bhatnagar, T. Vilppo, M. Selenius, A. Koistinen, and O. P. Penttinen. 2016a. “A multicomponent approach to using waste-derived biochar in biofiltration: A case study based on dissimilar types of waste.” Int. Biodeterior. Biodegrad. 119: 565–576. https://doi.org/10.1016/j.ibiod.2016.10.056.
Baltrėnaitė, E., P. Baltrėnas, and A. Lietuvninkas. 2016b. The sustainable role of the tree in environmental protection technologies. New York: Springer.
Baltrėnaitė, E., P. Baltrėnas, and A. Lietuvninkas. 2016c. Tvarus medžio vaidmuo aplinkos apsaugos technologijose. [In Lithuanian.] Vilnius, Lithuania: Technika.
Baltrėnas, P., E. Baltrėnaitė, J. Kleiza, and J. Švedienė. 2016. “A biochar-based medium in the biofiltration system: Removal efficiency, microorganism propagation and the medium penetration modeling.” J. Air Waste Manage. Assoc. 66 (7): 673–686. https://doi.org/10.1080/10962247.2016.1162227.
Baltrėnas, P., E. Baltrėnaitė, and E. Spudulis. 2015. “Biochar from pine and birch morphology and pore structure change by treatment in biofilter.” Water Air Soil Pollut. 226 (3): 1. https://doi.org/10.1007/s11270-015-2295-8.
Chen, X., G. Chen, L. Chen, Y. Chen, J. Lehmann, M. B. McBride, and A. G. Hay. 2011. “Adsorption of copper and zinc by biochars produced from pyrolysis of hardwood and corn straw in aqueous solution.” Bioresour. Technol. 102 (19): 8877–8884. https://doi.org/10.1016/j.biortech.2011.06.078.
Cruz, G., M. Pirilä, M. Huuhtanen, L. Carrión, E. Alvarenga, and R. L. Keiski. 2012. “Production of activated carbon from cocoa (Theobroma cacao) pod husk.” J. Civ. Environ. Eng. 2 (2): 1–6. https://doi.org/10.4172/2165-784X.1000109.
EBC (European Biochar Certificate). 2012. Guidelines for a sustainable production of biochar. Accessed September 30, 2017. http://www.europeanbiochar.org/biochar/media/doc/ebc-guidelines.pdf.
EUROSTAT. 2015. “Municipal wastes statistics.” Accessed September 10, 2017. http://ec.europa.eu/eurostat/statistics-explained/index.php/Municipal_waste_statistics.
Helsen, L., and E. Van den Bulck. 2005. “Review of disposal technologies for chromated copper arsenate (CCA) treated wood waste, with detailed analyses of thermochemical conversion processes.” Environ. Pollut. 134 (2): 301–314. https://doi.org/10.1016/j.envpol.2004.07.025.
Hu, X., Z. Ding, A. R. Zimmerman, S. Wang, and B. Gao. 2015. “Batch and column sorption of arsenic onto iron-impregnated biochar synthesized through hydrolysis.” Water Res. 68: 206. https://doi.org/10.1016/j.watres.2014.10.0098.
Huff, M. D., and J. W. Lee. 2016. “Biochar-surface oxygenation with hydrogen peroxide.” J. Environ. Manage. 165: 17–21. https://doi.org/10.1016/j.jenvman.2015.08.046.
Huggins, T. M., A. Haeger, J. C. Biffinger, and Z. J. Ren. 2016. “Granular biochar compared with activated carbon for wastewater treatment and resource recovery.” Water Res. 94: 225–232. https://doi.org/10.1016/j.watres.2016.02.059.
Inyang, M. I., B. Gao, Y. Yao, Y. Xue, A. Zimmerman, A. Mosa, P. Pullammanappallil, Y. S. Ok, and X. Cao. 2015. “A review of biochar as a low-cost adsorbent for aqueous heavy metal removal.” Crit. Rev. Environ. Sci Technol. 46 (4): 406–433. https://doi.org/10.1080/10643389.2015.1096880.
ISO. 1997. Soil quality—Determination of the specific electrical conductivity. ISO 11265. Geneva: ISO.
Kaudal, B. B., D. Chen, D. B. Madhavan, A. Downie, and A. Weatherley. 2016. “An examination of physical and chemical properties of urban biochar for use as growing media substrate.” Biomass Bioenergy 84: 49–58. https://doi.org/10.1016/j.biombioe.2015.11.012.
Kistler, R. C., F. Widmer, and P. H. Brunner. 1987. “Behavior of chromium, nickel, copper, zinc, cadmium, mercury, and lead during the pyrolysis of sewage sludge.” Environ. Sci. Technol. 21 (7): 704–708. https://doi.org/10.1021/es00161a012.
Komkienė, J., and E. Baltrėnaitė. 2016. “Biochar as adsorbent for removal of heavy metal ions [Cadmium (II), Copper (II), Lead (II), Zinc (II)] from aqueous phase.” Int. J. Environ. Sci. Technol. 13 (2): 471–482.
Miranda, I., J. Gominho, I. Mirra, and H. Pereira. 2012. “Chemical characterization of barks from Picea abies and Pinus sylvestris after fractioning into different particle sizes.” Ind. Crop. Prod. 36 (1): 395–400. https://doi.org/10.1016/j.indcrop.2011.10.035.
Miranda, I., J. Gominho, I. Mirra, and H. Pereira. 2013. “Fractioning and chemical characterization of barks of Betula pendula and Eucalyptus globulus.” Ind. Crop. Prod. 41: 299–305. https://doi.org/10.1016/j.indcrop.2012.04.024.
Mohan, D., C. U. Pittman Jr., M. Bricka, F. Smith, B. Yancey, J. Mohammad, P. H. Steele, M. F. Alexandre-Franco, V. Gómez-Serrano, and H. Gong. 2007. “Sorption of arsenic, cadmium, and lead by chars produced from fast pyrolysis of wood and bark during bio-oil production.” J. Colloid Interface Sci. 310 (1): 57–73. https://doi.org/10.1016/j.jcis.2007.01.020.
Rajapaksha, A. U., S. S. Chen, D. C. Tsang, M. Zhang, M. Vithanage, S. Mandal, B. Gao, N. S. Bolan, and Y. S. Ok. 2016. “Engineered/designer biochar for contaminant removal/immobilization from soil and water: Potential and implication of biochar modification.” Chemosphere 148 (27): 6e291. https://doi.org/10.1016/j.chemosphere.2016.01.043.
Rutherford, D. W., R. L. Wershaw, C. E. Rostad, and C. N. Kelly. 2012. “Effect of formation conditions on biochars: Compositional and structural properties of cellulose, lignin, and pine biochars.” Biomass Bioenergy 46: 693–701. https://doi.org/10.1016/j.biombioe.2012.06.026.
Rydholm, S. A. 1965. Pulping processes. New York: Interscience Publishers.
Samsuri, A. W., F. Sadegh-Zadeh, and B. J. Seh-Bardan. 2013. “Adsorption of As(III) and As(V) by Fe coated biochars and biochars produced from empty fruit bunch and rice husk.” J. Environ. Chem. Eng. 1 (4): 981–988. https://doi.org/10.1016/j.jece.2013.08.009.
Šćiban, M., and M. Klašnja. 2004. “Wood sawdust and wood originate materials as adsorbents for heavy metal ions.” Holz als Roh-und Werkstoff 62 (1): 69–73. https://doi.org/10.1007/s00107-003-0449-7.
Spokas, K. A., and D. C. Reicosky. 2009. “Impacts of sixteen different biochars on soil greenhouse gas production.” Ann. Environ. Sci. 3: 179–193.
Srivastava, S. K., A. K. Singh, and A. Sharma. 1994. “Studies on the uptake of lead and zinc by lignin obtained from black liquor: A paper industry waste material.” Environ. Technol. 15 (4): 353–361. https://doi.org/10.1080/09593339409385438.
Suguihiro, T. M., P. R. de Oliveira, E. I. P. de Rezende, A. S. Mangrich, L. H. Marcolino Jr., and M. F. Bergamini. 2013. “An electroanalytical approach for evaluation of biochar adsorption characteristics and its application for lead and cadmium determination.” Bioresour. Technol. 143: 40–45. https://doi.org/10.1016/j.biortech.2013.05.107.
Sun, Y., B. Gao, Y. Yao, J. Fang, M. Zhang, Y. Zhou, H. Chen, and L. Yang. 2014. “Effects of feedstock type, production method, and pyrolysis temperature on biochar and hydrochar properties.” Chem. Eng. J. 240: 574–578. https://doi.org/10.1016/j.cej.2013.10.081.
Tan, X., Y. Liu, G. Zeng, X. Wang, X. Hu, Y. Gu, and Z. Yang. 2015. “Application of biochar for the removal of pollutants from aqueous solutions.” Chemosphere 125: 70–85. https://doi.org/10.1016/j.chemosphere.2014.12.058.
TAPPI Test Methods. 1996. Acid–insoluble lignin in wood and pulp. TAPPI T 222 om-88. Atlanta: Technical Association of the Pulp and Paper Industry.
Vassilev, S. V., D. Baxter, L. K. Andersen, and C. G. Vassileva. 2010. “An overview of the chemical composition of biomass.” Fuel 89 (5): 913–933. https://doi.org/10.1016/j.fuel.2009.10.022.
Wu, Y., S. Zhang, X. Guo, and H. Huang. 2008. “Adsorption of chromium(III) on lignin.” Bioresour. Technol. 99 (16): 7709–7715. https://doi.org/10.1016/j.biortech.2008.01.069.
Xiao, X., B. Chen, and L. Zhu. 2014. “Transformation, morphology, and dissolution of silicon and carbon in rice straw-derived biochars under different pyrolytic temperatures.” Environ. Sci. Technol. 48 (6): 3411–3419. https://doi.org/10.1021/es405676h.
Xu, X., X. Cao, L. Zhao, H. Wang, H. Yu, and B. Gao. 2013. “Removal of Cu, Zn, and Cd from aqueous solutions by the dairy manure-derived biochar.” Environ. Sci. Pollut. Res. 20 (1): 358–368. https://doi.org/10.1007/s11356-012-0873-5.
Yao, Y., B. Gao, J. Chen, M. Zhang, M. Inyang, Y. Li, and L. Yang. 2013. “Engineered carbon (biochar) prepared by direct pyrolysis of Mg-accumulated tomato tissues: Characterization and phosphate removal potential.” Bioresour. Technol. 138: 8–13. https://doi.org/10.1016/j.biortech.2013.03.057.
Zhang, M., B. Gao, S. Varnoosfaderani, A. Hebard, Y. Yao, and M. Inyang. 2013. “Preparation and characterization of a novel magnetic biochar for arsenic removal.” Bioresour. Technol. 130: 457–462. https://doi.org/10.1016/j.biortech.2012.11.132.
Information & Authors
Information
Published In
Journal of Environmental Engineering
Volume 144 • Issue 9 • September 2018
Copyright
©2018 American Society of Civil Engineers.
History
Received: Oct 2, 2017
Accepted: Mar 15, 2018
Published online: Jun 21, 2018
Published in print: Sep 1, 2018
Discussion open until: Nov 21, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.