Evaluation of Direct Anodic Oxidation Process for the Treatment of Petroleum Refinery Wastewater
Publication: Journal of Environmental Engineering
Volume 144, Issue 7
Abstract
This paper investigates the treatment of real petroleum refinery wastewater (PRW) using an electrochemical oxidation process. Direct anodic oxidation, an effective advanced electrochemical oxidation process (AEOP), was applied with different electrodes using a parallel-plate batch electrochemical reactor. The petroleum refinery wastewater originated from a national oil refinery for producing fuels, lubricants, and intermediates. Experiments treated wastewater samples of initial chemical oxygen demand (COD) concentration effluent flowed directly from the refinery to a physical treatment unit. Direct anodic oxidation, which is characterized by the generation of a hydroxyl radical (), can potentially destroy a wide range of organic pollutants. This paper studies several parameters: current density, initial pH, temperature, and the type of electrode. The kinetic study shows that high COD removal efficiency can be achieved following a pseudo-first-order reaction rate. The rate constants of oxidative degradation of organic pollutants by radicals are determined for different anode materials. Results reveal that the COD removal efficiency of 84.8% is obtained at pH 4.0, 25°C, and using anode, whereas COD removal efficiency of 86.3% is obtained at pH 7.0, 50°C, and current density using a carbon felt anode. However, the highest COD removal is predicted at pH 4 and 55°C for most electrodes.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors thank the financial support provided by Chemical Engineering Dept./University of Babylon. They also thank Najaf Petroleum Refinery Directorate for their cooperation.
References
Aquino, J. M., G. F. Pereira, R. C. Rocha-Filho, N. Bocchi, and S. R. Biaggio. 2011. “Electrochemical degradation of a real textile effluent using boron-doped diamond or as anode.” J. Hazard. Mater. 192 (3): 1275–1282. https://doi.org/10.1016/j.jhazmat.2011.06.039.
Bhagawan, D., S. Poodari, S. Golla, V. Himabindu, and S. Vidyavathi. 2014. “Treatment of the petroleum refinery wastewater using combined electrochemical methods.” Desalin. Water Treat. 57 (8): 1–8. https://doi.org/10.1080/19443994.2014.987175.
Canizares, P., J. Garcıa-Gomez, C. Saez, and M. A. Rodrigo. 2004. “Electrochemical oxidation of several chlorophenols on diamond electrodes: Part II. Influence of waste characteristics and operating conditions.” J. Appl. Electrochem. 34 (1): 87–94. https://doi.org/10.1023/B:JACH.0000005587.52946.66.
Chen, G. 2004. “Electrochemical technologies in wastewater treatment.” Sep. Purif. Technol. 38 (1): 11–41. https://doi.org/10.1016/j.seppur.2003.10.006.
Clesceri, L. S., A. E. Greenberg, and A. D. Eaton. 1999. Standard methods for the examination of water and wastewater. 20th ed. Washington, DC: American Public Health Association, American Water Works Association, Water Environment Federation.
Comninellis, C. 1994. “Electrocatalysis in the electrochemical conversion/combustion of organic pollutants for wastewater treatment.” Electrochem. Acta 39 (11/12): 1857–1862. https://doi.org/10.1016/0013-4686(94)85175-1.
Diya’uddeen, B. H., W. M. A. Wan Daud, and A. R. Abdul Aziz. 2011. “Treatment technologies for petroleum refinery effluents: A review.” Process Saf. Environ. Prot. 89 (2): 95–105. https://doi.org/10.1016/j.psep.2010.11.003.
Elaoud, S. C., M. Panizza, G. Cerisola, and T. Mhiri. 2011. “Electrochemical degradation of sinapinic acid on a BDD anode.” Desalination 272 (1–3): 148–153. https://doi.org/10.1016/j.desal.2011.01.011.
Kapałka, A., and C. Comninellis. 2008. “Kinetic modelling of the electrochemical mineralization of organic pollutants for wastewater treatment.” J. Appl. Electrochem. 38 (1): 7–16. https://doi.org/10.1007/s10800-007-9365-6.
Koärbahti, B. K., and K. Artut. 2010. “Electrochemical oil/water demulsification and purification of bilge water using Pt/Ir electrodes.” Desalination 258 (1–3): 219–228. https://doi.org/10.1016/j.desal.2010.03.008.
Martinez-Huitle, C. A., M. A. Quiroz, C. Comninellis, S. Ferro, and A. De Battisti. 2004. “Electrochemical incineration of chloranilic acid using and Si/BDD electrodes.” Electrochim. Acta 50 (4): 949–956. https://doi.org/10.1016/j.electacta.2004.07.035.
Meshcheryakov, S. V., E. A. Mazlova, V. Zavorotnyi, and D. A. Miroshni-chenko. 2000. “Treatment of wastewaters in oil and gas plants.” Chem. Technol. Fuels Oils 36 (2): 143–145. https://doi.org/10.1007/BF02725265.
Morão, A., A. Lopes, M. T. Amorimb, and I. C. Gonçalves. 2004. “Degradation of mixtures of phenols using boron doped diamond electrodes for wastewater treatment.” Electrochim. Acta 49 (9–10): 1587–1595. https://doi.org/10.1016/j.electacta.2003.11.020.
Panizza, M., and G. Cerisola. 2008. “Removal of colour and COD from wastewater containing acid blue 22 by electrochemical oxidation.” J. Hazard. Mater. 153 (1–2): 83–88. https://doi.org/10.1016/j.jhazmat.2007.08.023.
Panizza, M., and G. Cerisola. 2010. “Applicability of electrochemical methods to carwash wastewaters for reuse. 1: Anodic oxidation with diamond and lead dioxide anodes.” J. Electroanal. Chem. 638 (1): 28–32. https://doi.org/10.1016/j.jelechem.2009.10.025.
Ramalho, A. M., C. A. Martínez-Huitle, and D. R. da Silva. 2010. “Application of electrochemical technology for removing petroleum hydrocarbons from produced water using a DSA-type anode at different flow rates.” Fuel 89 (2): 531–534. https://doi.org/10.1016/j.fuel.2009.07.016.
Rocha, J. B., M. S. Gomes, N. S. Fernandes, D. R. Da Silva, and C. A. Martínez-Huitle. 2012. “Application of electrochemical oxidation as alternative treatment of produced water generated by brazilian petrochemical industry.” Fuel Process. Technol. 96: 80–87. https://doi.org/10.1016/j.fuproc.2011.12.011.
Rodrigo, M. A., P. A. Michaud, G. Cerisola, C. Comninellis, I. Duo, and M. Panizza. 2001. “Oxidation of 4-chlorophenol at boron-doped diamond electrode for wastewater treatment.” J. Electrochem. Soc. 148 (5): D60–D64. https://doi.org/10.1149/1.1362545.
Santos, I. D., M. Dezotti, and A. J. Dutra. 2013. “Electrochemical treatment of effluents from petroleum industry using a anode.” Chem. Eng. J. 226: 293–299. https://doi.org/10.1016/j.cej.2013.04.080.
Sopaj, F., M. A. Rodrigo, N. Oturan, F. I. Podvorica, and J. Pinson. 2015. “Influence of the anode materials on the electrochemical oxidation efficiency.” Chem. Eng. J. 262 (Feb): 286–294. https://doi.org/10.1016/j.cej.2014.09.100.
Tasic, Z., V. K. Gupta, and M. M. Antonijevic. 2014. “The mechanism and kinetics of degradation of phenolics in wastewaters using electrochemical oxidation.” Int. J. Electrochem. Sci. 9 (7): 3473–3490.
Tröster, I., M. Fryda, D. Herrmann, L. Schäfer, W. Hänni, A. Perret, M. Blaschke, A. Kraft, and M. Stadelmann. 2002. “Electrochemical advanced oxidation process for water treatment using DiaChem® electrodes.” Diamond Relat. Mater. 11 (3–6): 640–645. https://doi.org/10.1016/S0925-9635(01)00706-3.
Wei, L., S. Guo, G. Yan, C. Chen, and X. Jiang. 2010. “Electrochemical pretreatment of heavy oil refinery wastewater using a three-dimensional electrode reactor.” Electrochim. Acta 55 (28): 8615–8620. https://doi.org/10.1016/j.electacta.2010.08.011.
Yan, L., H. Ma, B. Wang, Y. Wang, and Y. Chen. 2011. “Electrochemical treatment of petroleum refinery wastewater with three-dimensional multi-phase electrode.” Desalination 276 (1–3): 397–402. https://doi.org/10.1016/j.desal.2011.03.083.
Yavuz, Y., A. S. Koparal, and Ü. B. Öğütveren. 2010. “Treatment of petroleum refinery wastewater by electrochemical methods.” Desalination 258 (1–3): 201–205. https://doi.org/10.1016/j.desal.2010.03.013.
Information & Authors
Information
Published In
Copyright
©2018 American Society of Civil Engineers.
History
Received: Jul 12, 2017
Accepted: Jan 9, 2018
Published online: Apr 30, 2018
Published in print: Jul 1, 2018
Discussion open until: Sep 30, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.