Effect of MWCNTs on the Performance of Mixed-Matrix Membranes in Removing Cerium Ions from Aqueous Feed Solutions
Publication: Journal of Environmental Engineering
Volume 144, Issue 3
Abstract
This study investigates the effect of multiwalled carbon nanotubes (MWCNTs) on the performance of polyethersulfone membranes in cerium ion removal from aqueous solution. Neat polyethersulfone (PES) membrane and mixed-matrix membranes (MMMs) containing MWCNTs are fabricated by the wet phase inversion technique. The MWCNTs are functionalized by (3-aminopropyl)-trimethoxysilane (APTMS) to improve their adhesion to the polymeric matrix. The MWCNTs (before and after functionalization) are analyzed using Fourier-transform infrared spectroscopy (FTIR), Raman spectroscopy, and thermogravimetric analysis (TGA). Morphological properties of the fabricated membranes are evaluated by scanning electron microscopy (SEM) and field emission scanning electron microscopy (FESEM) methods. Fabricated membranes are subjected to further experiments in order to evaluate cerium ion removal efficiency. Permeation test results show that permeate flux and cerium (Ce) ion rejection increase as MWCNT content increases in the polymer matrix. The results also show that permeate flux and cerium ion rejection increase as operating pressure and feed flow rate increase while inversely decreased by increasing the cerium ion concentration in the feed solution. Application of ethylenediaminetetraacetic acid disodium (EDTA) drastically increases cerium ion rejection.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors acknowledge the University of Tehran’s financial support.
References
Afonso, M. D. (2006). “Surface charge on loose nanofiltration membranes.” Desalination, 191(1), 262–272.
Al-Rashdi, B. A. M., Johnson, D. J., and Hilal, N. (2013). “Removal of heavy metal ions by nanofiltration.” Desalination, 315, 2–17.
Aroon, M. A., Ismail, A. F., Montazer-Rahmati, M. M., and Matsuura, T. (2010). “Morphology and permeation properties of polysulfone membranes for gas separation: Effects of non-solvent additives and co-solvent.” Sep. Purif. Technol., 72(2), 194–202.
Bahr, J. L., Yang, J., Kosynkin, D. V., Bronikowski, M. J., Smalley, R. E., and Tour, J. M. (2001). “Functionalization of carbon nanotubes by electrochemical reduction of aryl diazonium salts: A bucky paper electrode.” J. Am. Chem. Soc., 123(27), 6536–6542.
Barakat, M. A. (2011). “New trends in removing heavy metals from industrial wastewater.” Arab. J. Chem., 4(4), 361–377.
Campbell, D. O., and Buxton, S. R. (1970). “Rapid ion exchange separations. Chromategraphic lanthanide separations using a high-pressure ion exchange method.” Ind. Eng. Chem. Process Des. Dev., 9(1), 89–94.
Choi, J. H., Jegal, J., and Kim, W. N. (2006). “Fabrication and characterization of multi-walled carbon nanotubes/polymer blend membranes.” J. Membr. Sci., 284(1), 406–415.
Dhall, S., Jaggi, N., and Nathawat, R. (2013). “Functionalized multiwalled carbon nanotubes based hydrogen gas sensor.” Sens. Actuators A, 201, 321–327.
Dutta, S., and Das, A. K. (2008). “Separation of selected 4f and 5f metals by solid phase extraction: A review.” J. Indian Chem. Soc., 85(1), 9–21.
Eccles, H. (1999). “Treatment of metal-contaminated wastes: Why select a biological process?” Trends Biotechnol., 17(12), 462–465.
Figoli, A., et al. (2010). “Influence of operating parameters on the arsenic removal by nanofiltration.” Water Res., 44(1), 97–104.
Fu, F., and Wang, Q. (2011). “Removal of heavy metal ions from wastewaters: A review.” J. Environ. Manage., 92(3), 407–418.
Ho, W., and Sirkar, K. (1992). Membrane handbook, Springer Science & Business Media, New York.
Hoffman, M., Hotze, E. M., and Wiesner, M. R. (2007). Environmental nanotechnology: Applications and impacts of nanomaterials, McGraw-Hill, New York.
Höllriegl, V., et al. (2010). “Measurement of cerium in human breast milk and blood samples.” J. Trace. Elem. Med. Biol., 24(3), 193–199.
Humphries, M. (2010). Rare earth elements: The global supply chain, Diane Publishing, Washington, DC.
Ismail, A. F., et al. (2011). “Gas separation performance of polyethersulfone/multi-walled carbon nanotubes mixed matrix membranes.” Sep. Purif. Technol., 80(1), 20–31.
Krishnakumar, P., et al. (2012). “Mass transport through vertically aligned large diameter MWCNTs embedded in parylene.” Nanotechnology, 23(45), 455101.
Krishnamurthy, N., and Gupta, C. K. (2004). Extractive metallurgy of rare earths, CRC Press, Boca Raton, FL.
Liu, X., Wang, M., Zhang, S., and Pan, B. (2013). “Application potential of carbon nanotubes in water treatment: A review.” J. Environ. Sci., 25(7), 1263–1280.
Liu, Y., Cui, G., Luo, C., Zhang, L., Guo, Y., and Yan, S. (2014). “Synthesis, characterization and application of amino-functionalized multi-walled carbon nanotubes for effective fast removal of methyl orange from aqueous solution.” RSC Adv., 4(98), 55162–55172.
Luo, J., and Wan, Y. (2013). “Effects of pH and salt on nanofiltration—A critical review.” J. Membr. Sci., 438, 18–28.
Maestro, P., and Huguenin, D. (1995). “Industrial applications of rare earths: Which way for the end of the century.” J. Alloy Compd., 225(1), 520–528.
Majeed, S., et al. (2012). “Multi-walled carbon nanotubes (MWCNTs) mixed polyacrylonitrile (PAN) ultrafiltration membranes.” J. Membr. Sci., 403, 101–109.
Majumder, M., Chopra, N., and Hinds, B. J. (2011). “Mass transport through carbon nanotube membranes in three different regimes: Ionic diffusion and gas and liquid flow.” ACS Nano, 5(5), 3867–3877.
Mondal, S., Hsiao, C. L., and Ranil Wickramasinghe, S. (2008). “Nanofiltration/reverse osmosis for treatment of coproduced waters.” Environ. Prog., 27(2), 173–179.
Murthy, Z. V. P., and Chaudhari, L. B. (2008). “Application of nanofiltration for the rejection of nickel ions from aqueous solutions and estimation of membrane transport parameters.” J. Hazard. Mater., 160(1), 70–77.
Murthy, Z. V. P., and Choudhary, A. (2011). “Separation of cerium from feed solution by nanofiltration.” Desalination, 279(1), 428–432.
Naguib, N., Ye, H., Gogotsi, Y., Yazicioglu, A. G., Megaridis, C. M., and Yoshimura, M. (2004). “Observation of water confined in nanometer channels of closed carbon nanotubes.” Nano Lett., 4(11), 2237–2243.
Pierard, N., et al. (2004). “Ball milling effect on the structure of single-wall carbon nanotubes.” Carbon, 42(8), 1691–1697.
Srivastava, N. K., and Majumder, C. B. (2008). “Novel biofiltration methods for the treatment of heavy metals from industrial wastewater.” J. Hazard. Mater., 151(1), 1–8.
Stafiej, A., and Pyrzynska, K. (2007). “Adsorption of heavy metal ions with carbon nanotubes.” Sep. Purif. Technol., 58(1), 49–52.
Wu, C. S. (2007). “Characterizing composite of multiwalled carbon nanotubes and POE-g-AA prepared via melting method.” J. Appl. Polym. Sci., 104(2), 1328–1337.
Yang, Y., Zhang, H., Wang, P., Zheng, Q., and Li, J. (2007). “The influence of nano-sized fillers on the morphologies and properties of PSF UF membrane.” J. Membr. Sci., 288(1), 231–238.
Yudianti, R., Onggo, H., Sudirman, Y. S., Iwata, T., and Azuma, J. I. (2011). “Analysis of functional group sited on multi-wall carbon nanotube surface.” Open Mater. Sci. J., 5(1), 242–247.
Information & Authors
Information
Published In
Copyright
©2018 American Society of Civil Engineers.
History
Received: Dec 22, 2016
Accepted: Sep 11, 2017
Published online: Jan 6, 2018
Published in print: Mar 1, 2018
Discussion open until: Jun 6, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.