Reduction of TDS in Water by Using Magnetic Multiwalled Carbon Nanotubes and Optimizing with Response Surface Methodology
Publication: Journal of Environmental Engineering
Volume 144, Issue 3
Abstract
The present study reports the effect of magnetic multiwalled carbon nanotubes (MMWCNTs) as an adsorbent for removing total dissolved solids (TDS) from water. MMWCNTs and multiwalled carbon nanotubes (MWCNTs) were characterized by X-ray diffraction (XRD), Fourier transform infrared (FTIR), X-ray photoelectron spectroscopy (XPS), vibrating sample magnetometer (VSM), and transmission electron microscopy (TEM). The results indicate that nanocomposites were well synthesized. The MMWCNTs can be easily blended in water and separated by a magnetic field. For the purpose of the study, experimental design in conjunction with central composite design was used to examine the impact of adsorbent dosage per initial concentration of total dissolved solids (D/TDS) [] and initial pH on percentage of TDS removal. The following optimum results for the maximum elimination TDS from an aqueous solution were obtained: and initial . Under optimal amount of process parameters, maximum removal (96%) was achieved. The Langmuir, Freundlich, Temkin, Sips, and Dubinin–Radushkevich (D-R) adsorption models were used to analyze the experimental data, and the Sips isotherm model was found to be better than other isotherm models for a high concentration of TDS { [parts per million (ppm)]}. The findings suggest that the MMWCNT can undoubtedly be considered an successful adsorbent and new solution to reduce TDS in watery solutions.
Get full access to this article
View all available purchase options and get full access to this article.
References
Al Amer, A. M., et al. (2016). “Fabrication and antifouling behaviour of a carbon nanotube membrane.” Mater. Des., 89(5), 549–558.
Al-Hakami, S. M., Khalil, A. B., Laoui, T., and Atieh, M. A. (2013). “Fast disinfection of Escherichia coli bacteria using carbon nanotubes interaction with microwave radiation.” Bioinorg. Chem. Appl., 2013(45), 1–9.
Alimohammadi, V., Sedighi, M., and Jabbari, E. (2016). “Response surface modeling and optimization of nitrate removal from aqueous solutions using magnetic multi-walled carbon nanotubes.” J. Environ. Chem. Eng., 4(4), 4525–4535.
Alimohammadi, V., Sedighi, M., and Jabbari, E. (2017a). “Experimental study on efficient removal of total iron from wastewater using magnetic-modified multi-walled carbon nanotubes.” Ecol. Eng., 102, 90–97.
Alimohammadi, V., Sedighi, M., and Jabbari, E. (2017b). “Optimization of sulfate removal from wastewater using magnetic multi-walled carbon nanotubes by response surface methodology.” Water Sci. Technol., 76(10), 2593–2602.
Annadurai, G., Juang, R.-S., and Lee, D.-J. (2002). “Use of cellulose-based wastes for adsorption of dyes from aqueous solutions.” J. Hazard. Mater., 92(3), 263–274.
Baghdadi, M., Ghaffari, E., and Aminzadeh, B. (2016). “Removal of carbamazepine from municipal wastewater effluent using optimally synthesized magnetic activated carbon: Adsorption and sedimentation kinetic studies.” J. Environ. Chem. Eng., 4(3), 3309–3321.
Debnath, S., Maity, A., and Pillay, K. (2014). “Impact of process parameters on removal of Congo red by graphene oxide from aqueous solution.” J. Environ. Chem. Eng., 2(1), 260–272.
Ho, Y., Porter, J., and McKay, G. (2002). “Equilibrium isotherm studies for the sorption of divalent metal ions onto peat: Copper, nickel and lead single component systems.” Water Air Soil Pollut., 141(1–4), 1–33.
Jeppu, G. P., and Clement, T. P. (2012). “A modified Langmuir-Freundlich isotherm model for simulating pH-dependent adsorption effects.” J. Contam. Hydrol., 129(1–2), 46–53.
Kumar, P. S., Ramalingam, S., Senthamarai, C., Niranjanaa, M., Vijayalakshmi, P., and Sivanesan, S. (2010). “Adsorption of dye from aqueous solution by cashew nut shell: Studies on equilibrium isotherm, kinetics and thermodynamics of interactions.” Desalination, 261(1), 52–60.
Legodi, M., and De Waal, D. (2007). “The preparation of magnetite, goethite, hematite and maghemite of pigment quality from mill scale iron waste.” Dyes Pigm., 74(1), 161–168.
Li, S., et al. (2015). “Recyclable magnetic nanocomposites as adsorbents to remove bisphenol A from water and their regeneration.” Chem. Eng. J., 260, 231–239.
Madrakian, T., Afkhami, A., Ahmadi, M., and Bagheri, H. (2011). “Removal of some cationic dyes from aqueous solutions using magnetic-modified multi-walled carbon nanotubes.” J. Hazard. Mater., 196, 109–114.
Mai, Z., Butin, V., Rakib, M., Zhu, H., Rabiller-Baudry, M., and Couallier, E. (2016). “Influence of bulk concentration on the organisation of molecules at a membrane surface and flux decline during reverse osmosis of an anionic surfactant.” J. Membr. Sci., 499, 257–268.
Qu, S., Huang, F., Yu, S., Chen, G., and Kong, J. (2008). “Magnetic removal of dyes from aqueous solution using multi-walled carbon nanotubes filled with particles.” J. Hazard. Mater., 160(2), 643–647.
Saleh, M. Y., Enany, G. E., Elzahar, M. H., Elshikhipy, M. Z., and Hamouda, R. (2014). “Removal of lead in high rate activated sludge system.” Int. J. Civ. Environ. Struct. Constr. Archit. Eng., 8(4), 413–418.
Wang, Q., Jiao, L., Du, H., Wang, Y., and Yuan, H. (2014). “ nanoparticles grown on graphene as advanced electrode materials for supercapacitors.” J. Power Sources, 245, 101–106.
Zhang, C., Sui, J., Li, J., Tang, Y., and Cai, W. (2012). “Efficient removal of heavy metal ions by thiol-functionalized superparamagnetic carbon nanotubes.” Chem. Eng. J., 210, 45–52.
Information & Authors
Information
Published In
Copyright
©2017 American Society of Civil Engineers.
History
Received: Feb 6, 2017
Accepted: Aug 17, 2017
Published online: Dec 28, 2017
Published in print: Mar 1, 2018
Discussion open until: May 28, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.