Use of Air Circulation Pipes in Deep Dropshafts for Reducing Air Induction into Sanitary Sewers
Publication: Journal of Environmental Engineering
Volume 142, Issue 4
Abstract
Falling water in dropshafts can induce large amounts of air into the airspace of sewers, and the subsequent release of the pressurized air can cause sewer odor concerns. The construction of a vertical airshaft that is connected to a dropshaft via pipes is expected to circulate the air and reduce air induction into sewers. In this study, two deep dropshafts with drop heights of 24 and 11 m were retrofitted sequentially with air circulation pipes in a sanitary sewer system. Air pressure inside the sewer line and air flow rates inside the air circulation pipes were monitored in 2006–2011. The results show that the retrofits reduced the manhole air pressure by about 10–47%. Air pressures in the manholes and the dropshafts, as well as air flow rates in the air circulation pipes, were noticed to have diurnal patterns, which appeared to relate to wastewater discharge and air pipe elevation. Overall, the ratios of air flow rate to water flow rate were found to be and for the two dropshafts, which are several times larger than those reported for laboratory dropshafts without air circulation pipes. Sewer air was indeed circulated via air pipes in the first dropshaft, while no circulation was observed most of time in the second dropshaft because the air was directly pushed downstream by the upstream dropshaft.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors are thankful to the Natural Sciences Engineering Research Council of Canada (NSERC) and the City of Edmonton for their financial support.
References
AE (Associated Engineering). (2008). “Odor control program report.” City of Edmonton, Edmonton, AB, Canada.
AE (Associated Engineering). (2011). “Data collection & interpretation of air flows associated with sewage dropshafts, calibration of probes.” City of Edmonton, Edmonton, AB, Canada.
AE (Associated Engineering). (2012). “Ongoing data collection and interpretation of air flows associated with sewage drop shafts.” City of Edmonton, Edmonton, AB, Canada.
Apgar, D., Witherspoon, J., and Easter, C., et al. (2007). “Minimization of odors and corrosion in collection systems.” Water Environment Research Foundation, Alexandria, VA.
Camino, G. A. (2011). “Hydraulics of plunging drop structures in urban drainage systems.” Ph.D. thesis, Dept. of Civil and Environmental Engineering, Univ. of Alberta, AB, Canada, 131.
Camino, G. A., Zhu, D. Z., and Rajaratnam, N. (2015). “Flow observations in tall plunging flow dropshafts.” J. Hydraul. Eng., 06014020.
Chanson, H. (2007). “Air entrainment processes in a full-scale rectangular dropshaft at large flows.” J. Hydraul. Res., 45(1), 43–53.
Chanson, H. (2009). “Turbulent air-water flows in hydraulic structures: Dynamic similarity and scale effects.” Environ. Fluid Mech., 9(2), 125–142.
City of Los Angeles. (2010). “Air treatment facility review study.” Los Angeles.
City of Los Angeles. (2011). “Sewer odor control master plan.” Los Angeles.
Davidson, S., Green, J., Mann, J., and Lamb, E. (2002). “Assessing the effectiveness of sewer headspace foul air extraction.” WEF, Alexandria, VA.
Edwini-Bonsu, S., and Steffler, P. M. (2004). “Air flow in sanitary sewer conduits due to wastewater drag: A CFD approach.” J. Environ. Eng. Sci., 3(5), 331–342.
Edwini-Bonsu, S., and Steffler, P. M. (2006a). “Dynamics of air flow in sewer conduits.” J. Hydraul. Eng., 778–790.
Edwini-Bonsu, S., and Steffler, P. M. (2006b). “Modeling ventilation phenomenon in sanitary sewer systems: A system theoretic approach.” J. Hydraul. Eng., 791–799.
Granata, F., de Marinis, G., Gargano, R., and Hager, W. H. (2011). “Hydraulics of circular drop manholes.” J. Irrig. Drain. Eng., 102–111.
Jalil, A. (2009). “Experimental and numerical study of plunging flow in vertical dropshafts.” Ph.D. thesis, Dept. of Civil and Environmental Engineering, Univ. of Alberta, AB, Canada, 214.
Ma, Y., Zhu, D. Z., and Rajaratnam, N. (2015). “Air entrainment in a tall plunging flow dropshaft.” J. Hydraul. Eng., in press.
Madsen, H. I., Hvitved-Jacobsen, T., and Vollertsen, J. (2006). “Gas phase transport in gravity sewers—A methodology for determination of horizontal gas transport and ventilation.” Water Environ. Res., 78(11), 2203–2209.
Parker, W. J., and Ryan, H. (2001). “A tracer study of headspace ventilation in a collector sewer.” J. Air Waste Manage. Assoc., 51(4), 582–592.
Pescod, M. B., and Price, A. C. (1978). “A study of sewer ventilation for the Tyneside sewerage scheme.”, Dept. of Civil Engineering, Univ. of Newcastle upon Tyne, U.K.
Pescod, M. B., and Price, A. C. (1982). “Major factors in sewer ventilation.” J. Water Pollut. Control Fed., 54(4), 385–397.
Rajaratnam, N., Mainali, A., and Hsung, C. Y. (1997). “Observations on flow in vertical dropshafts in urban drainage systems.” J. Environ. Eng., 486–491.
Schlichting, H., and Gersten, K. (2000). Boundary layer theory, 8th Ed., Springer, Berlin.
U.S. EPA. (1985). “Design manual: Odor and corrosion control in sanitary sewerage systems and treatment plants.” EPA/625/1-85/018, Washington, DC.
U.S. EPA. (1994). “Air emissions models for waste and wastewater.” EPA-453/R-94-080A, Office of Air Quality Planning and Standards Research Triangle Park, NC.
Wang, Y. C., Nobi, N., Nguyen, T., and Vorreiter, L. (2012). “A dynamic ventilation model for gravity sewer networks.” Water Sci. Technol., 65(1), 60–68.
Zhao, C., Zhu, D. Z., Sun, S., and Liu, Z. (2006). “An experimental study of a vortex dropshaft.” J. Hydraul. Eng., 61–68.
Information & Authors
Information
Published In
Copyright
© 2015 American Society of Civil Engineers.
History
Received: Oct 14, 2014
Accepted: Sep 2, 2015
Published online: Dec 28, 2015
Published in print: Apr 1, 2016
Discussion open until: May 28, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.