Dimethyl Sulfoxide Separating Waste Printed Circuit Boards by Dissolving Polymer Materials
Publication: Journal of Environmental Engineering
Volume 139, Issue 8
Abstract
The separation of waste printed circuit boards (WPCB) has been a bottleneck in WPCB resource processing. In this study, the separation of WPCBs was performed using dimethyl sulfoxide (DMSO) as a solvent by dissolving polymer materials. Waste printed circuit boards of in size were placed in DMSO at 60°C for 45 min. A metallographic microscope verified that the WPCBs produced the delamination. When the incubation time was increased from 45 to 210 min, polymer materials in WPCBs were dissolved by DMSO, and copper foils and glass fibers in WPCBs were separated completely. When the size of the WPCBs was increased from 1–1.5 to , the temperature of separating completely the copper foils and glass fibers in WPCBs increased from 60 to 90°C, but the separating time decreased from 210 to 90 min. The liquid photo solder resists (LPSR) were still adhered to the copper foils. The used DMSO was treated by rotary decompression evaporation, and the regenerated DMSO and solid residues were obtained. This new technology offers a new way to separate valuable materials from WPCBs.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors are grateful for support of the key subject of Shanghai Municipality (S30109) and Shanghai Science and Technology Commission (10dz1205302).
References
Augdahl, E., and Klaeboe, P. (1964). “Spectroscopic studies of charge transfer complexes VII. Sulphoxides and iodine cyanide.” Acta Chem. Scand., 18(1), 18–26.
Barontini, F., Marsanich, K., Petarca, L., and Cozzani, V. (2005). “Thermal degradation and decomposition products of electronic boards containing BFRs.” Ind. Eng. Chem. Res., 44(12), 4186–4199.
Chen, X. R., Zhang, H. Y., and Tian, X. Y. (2000). “DMSO application development prospects.” Chem. Ind. Eng. Prog., 1, 53–56 (in Chinese).
Chetri, P., Dass, N. D., and Sarma, N. S. (2008). “Development of a catalyst for solution of poly(vinylalcohol) in non-aqueous medium.” Chin. J. Polym. Sci., 26(4), 399–404.
Chien, Y. C., Wang, H. P., Lin, K. S., Huang, Y. J., and Yang, Y. W. (2000). “Fate of bromine in pyrolysis of printed circuit board wastes.” Chemosphere, 40(4), 383–387.
Dean, J. A. (1991). Lange’s chemistry handbook, 13th Ed., Science Press, Beijing, (in Chinese).
Gu, W. X., Huan, C., Yang, C., Zhu, P., and Li, C. H. (2008). “Recovery of aurum from waste printed circuit boards.” Environ. Sci. Technol., 31(4), 98–100 (in Chinese).
Chuanjin, G., et al. (2011). “Study on recycling of non-metal material of different types of waste printed circuit boards.” J. Shanghai Second Polytechnic Univ., 28(3), 223–229 (in Chinese).
Guo, J. Y., Guo, J., and Xu, Z. M. (2009). “Recycling of non-metallic fractions from waste printed circuit boards: A review.” J. Hazard. Mater., 168(2–3), 567–590.
Havlik, T., Orac, D., Petranikova, M., and Miskufo, A. (2011). “Hydrometallurgical treatment of used printed circuit boards after thermal treatment.” Waste Manage., 31(7), 1542–1546.
Kim, E. Y., Kim, M. S., Lee, J. C., Jeong, J. K., and Pandey, B. D. (2011). “Leaching kinetics of copper from waste printed circuit boards by electro-generated chlorine in HCl solution.” Hydrometallurgy, 107(3–4), 124–132.
Kim, E. Y., Kim, M. S., Lee, J. C., Yoo, K. K., and Jeong, J. K. (2010). “Leaching behavior of copper using electro-generated chlorine in hydrochloric acid solution.” Hydrometallurgy, 100(3–4), 95–102.
Lai, Y., Lee, W., Li, H., Wang, L., and Chang-Chien, G. (2007). “Inhibition of polybrominated dibenzo-p-dioxin and dibenzofuran formation from the pyrolysis of printed circuit boards.” Environ. Sci. Technol., 41(3), 957–962.
Lee, J. C., Song, H. T., and Yoo, J. M. (2007). “Present status of the recycling of waste electrical and electronic equipment in Korea.” Resour. Conservat Recycl., 50(4), 380–397.
Li, H., Shen, X. Y., Gong, G. L., and Wang, D. (2008). “Compatibility studies with blends based on hydroxypropylcellulose and polyacrylonitrile.” Carbohydr. Polym., 73(2), 191–200.
Ma, L. H., and Li, T. (2010). “Recovery of epoxy resin in waste printed circuit boards by solvent method.” J. Kunming Univ. Sci. Technol., 35(4), 85–88 (in Chinese).
Mohabuth, N., Hall, P., and Miles, N. (2007). “Investigating the use of vertical vibration to recover metal from electrical and electronic waste.” Miner. Eng., 20(9), 926–932.
Oishi, T., Koyama, K., Alam, S., Tanaka, M., and Lee, J.-C. (2007). “Recovery of high purity copper cathode from printed circuit boards using ammoniacal sulfate or chloride solutions.” Hydrometallurgy, 89(1–2), 82–88.
Wang, H., and Hirahara, M. (2004). “Extraction of flame retardants from electronic printed circuit board by supercritical carbon dioxide.” J. Supercrit. Fluids, 29(3), 251–256.
Yaun, T. Q., He, J., Xu, F., and Sun, R. C. (2010). “A new vision in the research of biomass resources: Complete-lignocellulose-dissolution system.” Prog. Chem., 22(0203), 471–481 (in Chinese).
Yu, J. L., Williams, E., and Ju, M. T. (2009). “Review and prospects of recycling methods for waste printed circuit boards.” IEEE Int. Symp. on Sustainable Systems Technology ISSST, IEEE International Symposium, Phoenix, AZ, 351–355.
Zhu, P., Fan, Z. Y., Lin, J., Liu, Q., Qian, G. R., and Zhou, M. (2009). “Enhancement of leaching copper by electro-oxidation from metal powders of waste printed circuit board.” J. Hazard. Mater., 166(2–3), 746–750.
Zhu, P., and Gu, G. B. (2002). “Recovery of gold and copper from waste printed circuits.” Chin. J. Rare Met., 26(3), 214–216 (in Chinese).
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: May 7, 2012
Accepted: Mar 4, 2013
Published online: Mar 6, 2013
Published in print: Aug 1, 2013
Discussion open until: Aug 6, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.