Adsorptive Selenite Removal Using Iron-Coated GAC: Modeling Selenite Breakthrough with the Pore Surface Diffusion Model
Publication: Journal of Environmental Engineering
Volume 139, Issue 2
Abstract
Iron-coated granular activated carbon (Fe-GAC) was proven to be effective for removing selenite from aqueous solution in batch studies. Design and use of the adsorbent in column settings requires understanding the key mass transfer characteristics for full-scale applications. In this study, rapid small-scale column tests (RSSCTs) were conducted at various empty bed contact times (EBCTs). A pore and surface diffusion model (PSDM) was introduced to predict selenite breakthrough curves of continuous flow packed columns containing Fe-GAC. Effluent Se(IV) breakthrough occurred immediately in the experiment with 0.055-min EBCT. The column reactor was found to treat approximately 780 bed volumes of water containing Se(IV) when EBCT was increased to 0.447 min before breakthrough occurred. The adsorption capacity was estimated to be . The adsorption results showed that the PSDM could provide satisfactory predictions for the column performance with the external mass transport coefficient () of . Full-scale column design criteria, such as hydraulic loading rate (HLR), carbon usage rate (CUR), and degree of column utilization (DoCU) were calculated and recommended.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work was supported by a U.S. DOE grant (DOE/CR-19174-429182). The GAC sample was provided by Norit Americas Inc. (Marshall, Texas).
References
Carter, M. C., and Weber, W. J. (1994). “Modeling adsorption of TCE by activated carbon preloaded by background organic matter.” Environ. Sci. Technol., 28(4), 614–623.
Charlet, L., et al. (2007). “Electron transfer at the mineral/water interface: Selenium reduction by ferrous iron sorbed on clay.” Geochim. Cosmochim. Acta, 71(23), 5731–5749.
Chand, V., and Prasad, S. (2009). “Trace determination and chemical speciation of selenium in environmental water samples using catalytic kinetic spectrophotometric method.” J. Hazard. Mater., 165(1–3), 780–788.
Crittenden, J. C., Hutzler, N. J., and Geyer, D. G. (1986). “Transport of organic compounds with saturated groundwater flow: Model development and parameter sensitivity.” Water Resour., 22(3), 271–284.
Crittenden, J. C., Reddy, P. S., and Arrora, H. (1991). “Prediction of GAC performance with RSSCTs.” J. Am. Water Works Assoc., 83(1), 77–87.
DeMarco, M. J., SenGupta, A. K., and Greenleaf, J. E. (2003). “Arsenic removal using a polymeric/inorganic hybrid sorbent.” Water Res., 37(1), 164–176.
Deng, D. F., Hung, Silas S. O., and Teh, S. J. (2007). “Selenium depuration: Residual effects of dietary selenium on Sacramento splittail (pogonichthys macrolepidotus).” Sci. Total Environ., 377(2–3), 224–232.
Finlayson, B. A. (1980). Nonlinear analysis in chemical engineering, McGraw-Hill Inc., New York.
Giles, C. H., MacEwan, T. H., Nakhwa, S. N., and Smith, D. (1960). “Studies in adsorption. Part XI. A system of classification of solution adsorption isotherms, and its use in diagnosis of adsorption mechanisms and in measurements of specific surface areas of solids.” J. Chem. Soc., 10, 3973–3993.
Goh, K., and Lim, T. (2004). “Geochemistry of inorganic arsenic and selenium in a topical Soil: Effect of reaction time, pH, and competitive anions on arsenic and selenium adsorption.” Chemosphere, 55(6), 849–859.
Gu, Z., Fang, J., and Deng, B. (2005). “Preparation and evaluation of GAC-based iron-containing adsorbents for arsenic removal.” Environ. Sci. Technol., 39(10), 3833–3843.
Hamdaoui, O., and Naffrechoux, E. (2007). “Modeling of adsorption isotherms of phenol and chlorophenols onto granular activated carbon Part I. Two-parameter models and equations allowing determination of thermodynamic parameters.” J. Hazard. Mater., 147(1–2), 381–394.
Hamilton, S. J. (2004). “Review of selenium toxicity in aquatic food chains.” Sci. Total Environ., 326(1–3), 1–31.
Hristovski, K. D., Westerhoff, P. K., Crittenden, J. C., and Olson, L. W. (2008). “Arsenate removal by iron (Hydr) oxide modified granulated activated carbon: Modeling Arsenate breakthrough with the pore surface diffusion model.” Separ. Sci. Technol., 43(11–12), 3154–3167.
Jekel, M., and Seith, R. (2002). “Comparison of conventional and new techniques for the removal of arsenic in a full scale water treatment plant.” Water Supply, 18(1), 628–631.
Knappe, D. R. U., Snoeyink, V. L., Roche, P., Prados, M. J., and Bourbigot, M. M. (1999). “Atrazine removal by preloaded GAC.” J. Am. Water Works Assoc., 91(10), 97–109.
LeVan, D. M., Carta, G., and Yon, C. M. (1997). “Adsorption and Ion Exchange.” Perry’s chemical engineers handbook, D. W., Green 7th Ed., McGraw-Hill, New York.
Loeppert, R. H., and Inskeep, W. P. (1996). “Iron.” Method of soil analysis part 3. Chemical methods, Vol 5, Soil Science Society of America and American Society of Agronomy Inc., Madison, WI, 639–664.
Lu, J. (1995). “Comparative study on determination of iron contents in activated carbon.” Linchan Huaxue Yu Congye, 15(1), 57–61.
McKeague, J. A., and Day, J. H. (1966). “Dithionite-and oxalate-extractable Fe and Al as aids in differentiating various classes of soils.” Can. J. Soil Sci., 46(1), 13–22.
Mertz, K. A., Gobin, F., Hand, D. W., Hokanson, D. R., and Crittenden, J. C. (1999). Manual: Adsorption design software for Windows (Ad-DesignS), Michigan Technological Univ., Houghton, MI.
Muscatello, J. R., and Janz, D. M. (2009). “Selenium accumulation in aquatic biota downstream of a uranium mining and milling operation.” Sci. Total Environ., 407(4), 1318–1325.
Peak, D., and Sparks, D. L. (2002). “Mechanisms of selenate adsorption on iron oxides and hydroxides.” ES&T., 36(7), 1460–1466.
Rovira, M., et al. (2008). “Sorption of selenium(IV) and selenium(VI) onto natural iron oxides: Goethite and hematite.” J. Hazard. Mater., 150(2), 279–284.
Schideman, L. C., Snoeyink, V. L., Marinas, B. J., Ding, L., and Campos, C. (2007). “Application of a three-component competitive adsorption model to evaluate and optimize granular activated carbon systems.” Water Res., 41(15), 3289–3298.
Schwertmann, U. (1964). “The differentiation of iron oxide in soils by a photochemical extraction with acid ammonium oxalate.” Z. Pflanzenernaehr. Dueng. Bodenkund, 105(3), 194–201.
Sotelo, J. L., Uguina, M. A., Delgado, J. A., and Celemin, L. I. (2004). “Adsortion of methyl ethyl ketone and trichloroethene from aqueous solution onto activated carbon fixed-bed adsorbers.” Sep. Purif. Technol. 37(2), 149–160.
Sperlich, A., Werner, A., Genz, A., Amy, G., Worch, E., and Jekel, M. (2005). “Breakthrough behavior of granular ferric hydroxide (GFH) fixed-bed adsorption filters: Modeling and experimental approaches.” Water Res., 39(6), 1190–1198.
Su, T. Z., Guan, X. H., Gu, G. W., and Wang, J. M. (2008). “Adsorption characteristics of As(V), Se(IV), and V(V) onto activated alumina: Effects of pH, surface loading, and ionic strength.” J. Colloid Interface Sci., 326(2), 347–353.
Summers, R. S., Hooper, S. M., Solarik, G., Owen, D. M., and Hong, S. (1995). “Bench-scale evaluation of GAC for NOM control.” J. Am. Water Works Assoc., 87(8), 69–80.
Thacker, W. E., Snoefi, V. L., and Crittenden, J. C. (1981). Modeling of activated carbon and coal gasification char adsorbents in single-solute and bisolute system. Water resources center, Univ. of Illinois Urbana, Champaign, IL.
Treybal, R. E. (1981). Mass-transfer operations, 3rd Ed., McGraw-Hill, New York.
U.S. Environmental Protection Agency (USEPA). (1996). “ICR manual for bench-and pilot-scale treatment studies.”, Office of Ground Water and Drinking Water, Technical Support Division, Cincinnati, OH.
U.S. Environmental Protection Agency (USEPA). (2009). “National primary drinking water regulations.”, Office of Ground Water and Drinking Water, Washington, DC.
Vaughan, R. L., Jr., Reed, B. E., and Smith, E. H. (2007). “Modeling As(V) removal in iron oxide impregnated activated carbon columns.” J. Environ. Eng., 133(1), 121–124.
Weber, W. J., McGinely, P. M., and Kaze, L. E. (1991). “Sorption phenomena in surface systems: concepts, models and effects on contaminant fate and transport.” Water Res., 25(5), 499–528.
Weber, W. J., Sontheimer, H., Crittenden, J. C., and Summers, S. (1988). Activated carbon for water treatment, 2nd Ed., DVGW-Forschungsstelle, Engler-Bunte Institut, Universitat Karlsruhe, Karlsruhe, Germany.
Westerhoff, P., Highfield, D., Badruzzaman, M., and Yoon, Y. (2005). “Rapid small-scale column tests for arsenate removal in iron oxide packed bed columns.” J. Environ. Eng., 131(2), 262–271.
Zhang, N., Lin, L. S., and Gang, D. C. (2008). “Adsorptive selenite removal from water using iron-coated GAC adsorbents.” Water Res., 42(14), 3809–3816.
Zhang, L., Liu, N., Yang, L. J., and Lin, Q. (2009). “Sorption behavior of nano-TiO2 for the removal of selenium ions from aqueous solution.” J. Hazard. Mater., 170(2–3), 1197–1203.
Information & Authors
Information
Published In
Journal of Environmental Engineering
Volume 139 • Issue 2 • February 2013
Pages: 213 - 219
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Jul 21, 2011
Accepted: Aug 6, 2012
Published online: Aug 17, 2012
Published in print: Feb 1, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.