Spoiler Baffles in Circular Culverts
Publication: Journal of Environmental Engineering
Volume 137, Issue 9
Abstract
In many situations the design of culverts prevents the upstream migration of fish because water velocity in the barrel is greater than that of the natural channel. One way to reduce the water velocity within the culvert is to install spoiler baffles on the base. The current investigation uses a three-dimensional numerical tool to examine the influence of the baffle geometry on flow within culverts of varying diameters. The results indicate that spoiler baffles can reduce velocities in the culvert dramatically. The final choice of design hinges on the need of the fish and the discharge capacity of the culvert.
Get full access to this article
View all available purchase options and get full access to this article.
References
Bell, M. C. (1986). Fisheries handbook of engineering requirements and biological criteria, U.S. Army Corps of Engineers, Portland, OR.
Boubée, J., Jowett, I., Nichols, S., and Williams, E. (1999). “Fish passage at culverts: A review with possible solutions for New Zealand indigenous species.” Dept. of Conservation, Wellington, New Zealand.
Clay, C. H. (1995). Design of fishways and other fish facilities, Lewis, Boca Raton, FL.
Ead, S. A., Rajaratnam, N., and Katopodis, C. (2002). “Generalized study of hydraulics of culvert fishways.” J. Hydraul. Eng., 128(11), 1018–1022.
Feurich, R., and Boubée, J. (2006). “Optimizing the flow pattern in culverts for small upstream migrating fish using a numerical 3D code.” River Flow 2006: Proc., Int. Conf. on Fluvial Hydraulics, Vol. 2, Lisbon, Portugal, 2037–2041.
Feurich, R., and Boubée, J. (2007). “Investigation of spoiler baffle geometry influence on the velocity distribution in culverts using a numerical 3D code.” Proc., 32nd IAHR Congress, Venice, Italy.
Feurich, R., Boubée, J., and Rutschmann, P. (2007). “Optimising flow patterns in culverts of varying size to facilitate the upstream passage of small fish.” Int. Symp. of Ecohydraulics, National Institute of Water and Atmospheric Research, Christchurch, New Zealand.
Haro, A., et al., eds. (2009). Challenges for diadromous fishes in a dynamic global environment, American Fisheries Society, Bethesda, MD, 943.
Hirt, C. W. (1992). “Volume-fraction techniques: Powerful tools for flow modelling.” Flow Science Rep. No. FSI-92-00-02, Flow Science, Inc., Santa Fe, NM.
Hirt, C. W., and Nicholes, B. D. (1981). “Volume of fluid (VOF) method for the dynamics of free boundaries.” J. Comput. Phys., 39, 201.
Kroes, M. J., Gough, P., Schollema, P. P., and Wanningger, H. (2006). From sea to source—Practical guidance for restoration of fish migration in European rivers, Hunze en Aa’s, Veeendam, Netherlands, 120.
Leong, D. (2007). “Creating fish habitat: Mitigating the impact of long culverts.” Int. Symp. of Ecohydraulics, National Institute of Water and Atmospheric Research, Christchurch, New Zealand.
Rajaratnam, N., Katopodis, C., and Lodewyk, S. (1991). “Hydraulics of culvert fishways IV: Spoiler baffle culvert fishways.” Can. J. Civ. Eng., 18, 76–82.
Stevenson, C., Kopeinig, T., Feurich, R., and Boubée, J. (2008). “Culvert barrel design to facilitate the upstream passage of small fish.” Auckland Regional Council Technical Publication No. 366, Auckland, New Zealand, 44.
Young, P., Jakeman, A., and McMurtrie, R. (1980). “An instrument variable method for model order identification.” Automatica, 16, 281–294.
Information & Authors
Information
Published In
Copyright
© 2011 American Society of Civil Engineers.
History
Received: Nov 11, 2009
Accepted: Mar 7, 2011
Published online: Mar 9, 2011
Published in print: Sep 1, 2011
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.