Multiple Linear Regression Model Approach for Aerosol Dispersion in Ventilated Spaces Using Computational Fluid Dynamics and Dimensional Analysis
Publication: Journal of Environmental Engineering
Volume 136, Issue 6
Abstract
Aerosol dispersion in living spaces especially bioaerosols, due to accidents or deliberate acts, is of significant current interest. Computational fluid dynamics (CFD) provides an accurate and detailed platform to study the influence of different parameters on aerosol distribution in indoor spaces. The simulations however are time consuming and site-specific. The work here introduces an approach toward addressing this challenge. During emergencies, an accurate, quicker, and more general model is required to give rapid answers to first responders. Significant parameters influencing aerosol behavior in an office room were identified and through dimensional analysis, nine dimensionless groups were developed. Fractional factorial design was used to build sixteen scenarios to explore the design space. These scenarios were then simulated using a comprehensive CFD model. Large eddy simulation with the Smagorinsky subgrid scale model was applied to compute the airflow. Aerosols were modeled as a dispersed solid phase using the Lagrangian treatment. The influence of the dimensionless groups on the temporal variation of the number of aerosols in the room and the spatial distribution of the particles in the room was analyzed. The results showed that all the identified dimensionless groups were significant. Multiple linear regression models were developed for the prediction of the number of aerosols in the room and their spatial distribution as a function of the significant parameters influencing aerosol transport. The linear models accurately predicted the data on which they were based but did not predict the results of the independent tests as well. The limited predictive ability of the model showed that the relationships between the dimensionless groups are nonlinear and a higher level of experimental design will have to be applied to better explore the design space.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The work described in this paper was supported by the L.D. Betz endowment.
References
Ankenman, B. E. (1999). “Design of experiments with two and four level factors.” J. Quality Technol., 31(4), 363–375.
Beghein, C., Jiang, Y., and Chen, Q. Y. (2005). “Using large eddy simulation to study particle motions in a room.” Indoor Air, 15, 281–290.
Bingham, T. C. (1997). “An approach to developing multi-level fractional factorial design.” J. Quality Technol., 29, 370–380.
Box, G. E. P., Hunter, W. G., and Hunter, J. S. (1978). Statistics for experimenters: An introduction to design, data analysis, and model building, 1st Ed., Wiley, New York.
Buckingham, E. (1915). “Model experiments and the forms of empirical equations.” Trans. ASME, 37, 263–296.
Chang, T. -J., Hseih, Y. -F., and Kao, H. -M. (2006). “Numerical investigation of airflow pattern and particulate matter transport in naturally ventilated multi-room buildings.” Indoor Air, 16, 136–152.
Devore, L. J., (2004). Probability and statistics for engineering and the sciences, Thomson Brooks/Cole, Calif.
ESI, R. D. (2004). , version 2007.2.25, ESI R&D Inc., Huntsville, Ala.
Gao, N. P., and Niu, J. L. (2007). “Modeling particle dispersion and deposition in indoor environments.” Atmos. Environ., 41, 3862–3876.
Hand, D. W., Crittenden, J. C., and Thacker, W. E. (1984). “Simplified models for design of fixed-bed adsorption systems.” J. Environ. Eng., 110(2), 440–456.
Hinds, W. C. (1999). Aerosol technology, properties, behavior and measurement of airborne particles, 2nd Ed., Wiley, New York.
Kowalski, W., Bahnfleth, W. P., and Rosenberger, J. L. (2003). “Dimensional analysis of UVGI air disinfection systems.” HVAC&R Res., 9(3), 347–362.
Lu, W., and Howarth, T. A. (1996). “Numerical analysis of indoor aerosol particle deposition and distribution in two-zone ventilation system.” Build. Environ., 31(1), 41–50.
Lu, W., Howarth, T. A., Adam, N., and Riffat, S. B. (1996). “Modelling and measurement of airflow and aerosol particle distribution in a ventilated two-zone chamber.” Build. Environ., 31(5), 417–423.
MathWorks. (2007). MATLAB, version 7.5.0, Mathworks Inc., Natick, Mass.
Montgomery, D. C. (2005). Design and analysis of experiments, 6th Ed., Wiley, Hoboken, N.J.
Musser, A., and Bahnfleth, W. P. (2001). “Parametric study of charging inlet diffuser performance in stratified chilled water storage tanks with radial diffusers: Part 2—Dimensional analysis, parametric simulations and simplified model development.” HVAC&R Res., 7(1), 51–65.
Nazaroff, W. W., and Alvarez-Cohen, L. (2002). Environmental engineering science, Wiley, New York.
Piomelli, U. (1999). “Large-eddy simulation: Achievements and challenges.” Prog. Aerosp. Sci., 35, 335–362.
Posner, J. D., Buchanan, C. R., and Dunn-Rankin, D. (2003). “Measurement and prediction of indoor air flow in a model room.” Energy Build., 35, 515–526.
Sáez, P. B., and Rittman, B. E. (1988). “Improved pseudoanalytical solution for steady-state biofilm kinetics.” Biotechnol. Bioeng., 32, 379–385.
Song, J., Bahnfleth, W., and Cimbala, J. (2004). “Parametric study of single-pipe diffusers in stratified chilled water storage tanks.” HVAC&R Res., 10(3), 345–365.
Tian, Z. F., and Tu, J. Y. (2007). “CFD studies of indoor airflow and contaminant particle transportation.” Particul. Sci. Technol., 25, 555–570.
Tian, Z. F., Yu, J. Y., Yeoh, G. H., and Yuen, R. K. K. (2007). “Numerical studies of indoor airflow and particle dispersion by large eddy simulation.” Build. Environ., 42, 3483–3492.
Walton, G. N., and Dols, W. S. (2005). “CONTAM 2.4 user guide and program documentation.” NISTIR 7251, NIST, Gaithersburg, Md.
Webb, G. F. (2003). “A silent bomb: The risk of anthrax as a weapon of mass destruction.” Proc. Natl. Acad. Sci. U.S.A., 100(8), 4355.
Zhao, B., Zhang, Y., Li, X., Yang, X., and Hunag, D. (2004). “Comparison of indoor aerosol particle concentration and deposition in different ventilated rooms by numerical method.” Build. Environ., 39, 1–8.
Information & Authors
Information
Published In
Journal of Environmental Engineering
Volume 136 • Issue 6 • June 2010
Pages: 638 - 649
Copyright
© 2010 ASCE.
History
Received: Nov 18, 2008
Accepted: Nov 20, 2009
Published online: Nov 23, 2009
Published in print: Jun 2010
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.