Impacts of a Pervious Concrete Retention System on Neighboring Clay Soils
Publication: Journal of Cold Regions Engineering
Volume 32, Issue 1
Abstract
This study evaluated changes in moisture and temperature of clay soils next to an underground aggregate storage bed of a pervious concrete pavement system during the winter in Pullman, Washington. Sensors were installed in order to determine how a neighboring underground aggregate storage bed with retention capabilities might affect neighboring soils such as might occur from installing permeable pavement shoulders next to a roadway. The sensors were located at 30, 60, and 90 cm below the soil surface. According to the findings, none of the soil temperature readings dropped below freezing, nor did the soil moisture readings exceed saturation during the relatively mild winter. Also, during periods of precipitation, the soils near the aggregate storage bed cooled off and then warmed back up faster than soils farther away. The soils near the retention system at depths above the bottom of the aggregate storage bed tended to remain drier than those soils farther away, while closer soils below the bottom of the aggregate storage bed had higher moisture content than those farther away. Therefore, little additional water or colder temperatures are expected on neighboring soils under these conditions from these facilities. However, additional research under colder conditions is warranted to understand what might occur during more severe winters.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors would like to thank the Washington State Department of Ecology Husseman Fund, the Washington State University Facilities Services Department, and the Center for Environmentally Sustainable Transportation in Cold Climates (CESTiCC) for providing implementation and research funding. The authors are also especially grateful to Dr. Somayeh Nassiri and the team of research assistants (Quinn Michael Langfitt, Brandon Scott Werner, Benjamin Nantasai, Milena Rangelov, Zhao Chen, Trace Sendele), Decagon Devices Inc., and the Washington State University Facilities Services Department for their cooperation in different stages of the project.
References
Decagon Devices. (2015). “5TM soil moisture & temperature sensor.” ⟨http://www.decagon.com/en/soils/volumetric-water-content-sensors/5tm-vwc-temp⟩ (Mar. 25, 2016).
Fassman, E. A., and Blackbourn, S. (2010). “Urban runoff mitigation by a permeable pavement system over impermeable soils.” J. Hydrol. Eng., 475–485.
Ferguson, B. K. (2005). Porous pavements, CRC Press, Boca Raton, FL.
Goede, W., and Haselbach, L. (2012). “Investigation into the structural performance of pervious concrete.” J. Transp. Eng., 98–104.
Haselbach, L. (2016). “Low impact development feasibility project on the WSU Pullman Campus and Phase I of the stormwater-pavement interface in cold climates.”, Washington State Dept. of Ecology, Olympia, WA.
Henderson, V., and Tighe, S. L. (2011). “Evaluation of pervious concrete pavement permeability renewal maintenance methods at field sites in Canada.” Can. J. Civ. Eng., 38(12), 1404–1413.
Huang, P. M., Li, L., and Sumner, M. E. (2011). Handbook of soil sciences: Properties and processes, 2nd Ed., CRC Press, Boca Raton, FL.
Huang, Y. H. (2004). Pavement analysis and design, 2nd Ed., Prentice Hall, London.
Knapton, J. (2007). The structural design of heavy duty pavements for ports and other industries, 4th Ed., Interpave, Precast Paving and Kerb Association, Leicester, U.K.
NRMCA (National Ready Mixed Concrete Association). (2004). “Freeze thaw resistance of pervious concrete.” Silver Spring, MD.
Pavement Interactive. (2008). “Calculation of frost depth.” ⟨http://www.pavementinteractive.org/article/calculation-of-frost-depth/⟩ (Jul. 31, 2016).
Raver, M. (1974). “Soil survey of Garfield County area, Washington.” ⟨http://www.nrcs.usda.gov/Internet/FSE_MANUSCRIPTS/washington/WA623/0/wa623_text.pdf⟩ (Aug. 15, 2016).
Roseen, R. M., Ballestero, T. P., Houle, J. J., Briggs, J. F., and Houle, K. M. (2012). “Water quality and hydrologic performance of a porous asphalt pavement as a stormwater treatment strategy in a cold climate.” J. Environ. Eng., 81–89.
Topp, G. C. (1980). “Electromagnetic determination of soil water content: Measurements in coaxial transmission lines.” Water Resour. Res., 16(3), 574–582.
Washington State Department of Ecology. (2012). Stormwater management manual for western Washington, Olympia, WA.
Western Regional Climate Center. (2016). “PULLMAN EXP STN, WASHINGTON (456784): Period of record monthly climate summary.” ⟨http://www.wrcc.dri.edu/cgi-bin/cliMAIN.pl?wa6784⟩ (Jul. 31, 2016).
Winterkorn, H. F., Eyring, H., Hogentogler, C. A., Bollen, R. E., and Campen, W. H. (1946). “Theoretical aspects of water accumulation in cohesive subgrade soils.” Proc., Twenty-Fifth Annual Meeting, Highway Research Board, Washington, DC, 422–435.
Wunderground. (2016). “Weather history for Pullman, WA.” ⟨https://www.wunderground.com/history/airport/KPUW/2016/07/30/DailyHistory.html?req_city=Pullman&req_state=WA&reqdb.zip=99163&reqdb.magic=1&reqdb.wmo=99999⟩ (Jul. 30, 2016).
Yekkalar, M. (2016). “Soil moisture and temperature impacts on adjacent soils from permeable pavement systems.” M.S. thesis, Washington State Univ., Pullman, WA.
Ziehl, M., Haselbach, L., Wen, H., and Muhunthan, B. (2014). “Below pavement water storage: Literature review and synthesis.”, Washington State Dept. of Transportation, Olympia, WA.
Information & Authors
Information
Published In
Copyright
©2017 American Society of Civil Engineers.
History
Received: Aug 30, 2016
Accepted: Jul 13, 2017
Published online: Nov 22, 2017
Published in print: Mar 1, 2018
Discussion open until: Apr 22, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.