Cut-Slope Icing Prevention: Case Study of the Seasonal Frozen Area of Western China
Publication: Journal of Cold Regions Engineering
Volume 30, Issue 3
Abstract
Icing caused by the construction of cut-slope roadways is a severe problem in cold regions and is difficult to mitigate. This study proposes a method for preventing icing on cut-slope roadways. A new structure for icing prevention was designed and constructed in the field. The key points of the proposed structure are the layered insulation drainage ditch and insulated facing wall. This structure is designed to ensure that water outcrops located on cut slopes and the groundwater drainage ditch remain unfrozen during winter. Surface water is drained through an upper open gutter during the warm season, and groundwater from the cut slope is drained through the insulated blind ditch. The air temperature, ground temperature under the pavement, and temperature of the stone blind ditch are presented and analyzed. The field experiment proved that the proposed structure performs well and effectively mitigates icing on cut-slope roadways.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This study is supported by the Funds of the National Key Basic Research and Development Program (2012CB026102) and National Natural Science Fund (41571070) and Fund (HHS-TSS-STS-1502). The authors thank the editors and the anonymous reviewers for their work.
References
Carey, K. L. (1973). “Icings developed from surface water and groundwater.” Monograph III-D3, U.S. Army Cold Regions Research and Engineering Laboratory, Hanover, NH, 1–67.
Charles, W. S. (1990). “Aufeis formulation and prevention.” Cold regions hydrology and hydraulics, ASCE, Reston, VA.
Clark, I. D., and Lauriol, B. (1997). “Aufeis of the Firth River basin, northern Yukon, Canada: Insights into permafrost hydrogeology and karst.” Arct. Alp. Res., 29(2), 240–252.
Cold and Arid Regions Environmental Research Institute. (2005). “Design parameters and techniques of frost damage prevention in cold regions of Gansu.”, Gansu, China (in Chinese).
Kane, D. L. (1981). “Physical mechanics of aufeis growth.” Can. J. Civ. Eng., 8(2), 186–195.
Li, S. S., Benson, C., Shapiro, L., and Dean, K. (1997). “Aufeis in the Ivishak River, Alaska, mapped from satellite radar interferometry.” Rem. Sens. Environ., 60(2), 131–139.
McFadden, T. (1990). “Case study of cold-regions research in Finland.” J. Cold Reg. Eng., 69–84.
Saarelainen, S., and Vaskelainen, J. (1988). “Problems of Arctic road construction and maintenance in Finland.” Proc., 5th Int. Conf. on Permafrost, Tapir, Trondheim 2, Norway, 1466–1491.
Streitz, J. T., and Ettema, R. (2002). “Observations from an aufeis wind tunnel.” Cold Reg. Sci. Technol., 34(2), 85–96.
Transportation Department of China. (2004). “Specifications for design of highway subgrades.”, Ministry of Transport of China, China.
Vinson, T. S. (2005). “Mitigation options to reduce icing and thaw instability problems on the Denali park access road.” J. Glaciol. Geocryol., 27(1), 17–32.
Yoshikawa, K., Hinzman, L. D., and Kane, D. J. (2007). “Spring and aufeis (icing) hydrology in Brooks Range, Alaska.” J. Geophys. Res. Biogeosci., 112, G04S43.
Yu, W. B., et al. (2005). “Icing problems on road in Da Xinganling forest region and prevention measures.” Cold Reg. Sci. Technol., 42(1), 79–88.
Yu, W. B., Guo, M., Lai, Y. M., Liu, Z. Q., and Li, Q. H. (2007). “Icing problems on road and mitigation methods in China.” Cold Regions Engineering 2006: Current Practice in Cold Regions Engineering, ASCE, Reston, VA, 73–75.
Information & Authors
Information
Published In
Copyright
© 2016 American Society of Civil Engineers.
History
Received: Aug 25, 2015
Accepted: Dec 8, 2015
Published online: Feb 18, 2016
Discussion open until: Jul 18, 2016
Published in print: Sep 1, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.