Soft and Hard Slab Snow Dynamic Response to Explosives Used in Avalanche Hazard Mitigation
Publication: Journal of Cold Regions Engineering
Volume 30, Issue 2
Abstract
Avalanche mitigation routinely uses explosives to both initiate avalanches and test slope stability. This project aimed to verify past findings and further develop an understanding of explosive shockwave interactions with hard and soft slab conditions within 2–5 m of the detonation. Pentolite cast boosters (0.9 and 0.45 kg) were detonated at 0.0, 0.5, 1.0, 1.5, and 2.0 m above the snow. Six orthogonally paired accelerometers inserted into the snowpack recorded snow accelerations. High-pressure sensors located at and above the snow surface measured air overpressures. Distances were scaled to trinitrotoluene (TNT) equivalents to aid in explosive placement comparisons. A substantial advantage was recorded in snow accelerations attributable to elevating explosives above the snow surface. Elevating charges not only increased overall response, but also increased the effective range and depth with no penalty in shock attenuation rates. Using attenuation relationships, a method for predicting the maximum range and affected volume for a specified acceleration value was developed. Field data showed the importance of explosive placement and how the affected volume, and thereby the probability of artificial avalanche release, can be greatly increased.
Get full access to this article
View all available purchase options and get full access to this article.
References
Abromeit, D. (2010). “Inbounds incidents & fatalities 2008/9.” Avalanche Rev., 28(3), 26.
Bones, J. (2012). “Experimental investigation of interactions between explosive detonations and the resulting snowpack response.” M.S. thesis, Montana State Univ., Bozeman, MT.
Bones, J., Miller, D. A., and Larson, R. (2012a). “Exploring the effectiveness of explosives for avalanche control.” Int. Society of Explosives Engineers 38th Annual Conf. on Explosives and Blasting Technique, Nashville, TN.
Bones, J., Miller, D. A., and Savage, S. (2012b). “An experimental dynamic response study of hard slab seasonal snow to explosive avalanche hazard mitigation.” Int. Snow Science Workshop, Anchorage, AK.
Colorado Avalanche Information Center. (2014). “Statistics and reporting.” 〈〉.
Ferrari, M. (2010). “Post-control avalanches: Definition, history, causes and the future.” 2010 Int. Snow Science Workshop, Squaw Valley, CA.
Fuchs, A. (1957). “Effects of explosives on snow.”, U.S. Army Snow Ice and Permafrost Research Establishment Corps of Engineers.
Gubler, H. (1977). “Artificial release of avalanches by explosives.” J. Glaciol., 19(81), 419–429.
Ingram, L. F. (1962). “Air blast in an arctic environment.”, U.S. Army Waterways Experiment Station, Vicksburg, MS.
ISEE (International Society of Explosive Engineers). (1998). Blasters’ handbook, 17th Ed., Cleveland.
Joachim, C. E. (1967). “Shock transmission through ice and snow.”, U.S. Army Waterways Experiment Station, Vicksburg, MS.
Johnson, J. B., and Solie, D. J. (1993). “Shock response of snow.” J. Appl. Phys., 73(10), 4852–4861.
Johnson, J. B., Solie, D. J., and Barrett, S. A. (1994). “The response of a seasonal snow cover to explosive loading.” Ann. Glaciol., 19, 49–54.
Kinney, G. F., and Graham, K. J. (1985). Explosive shocks in air, Springer, Berlin.
LabVIEW [Computer software]. National Instruments, Austin, TX.
LaChapelle, E. (1977). “Snow avalanches: A review of current research and applications.” J. Glaciol., 19(81), 313–324.
Livingston, C. W. (1968). “Explosions in snow.”, U.S. Army Material Command Cold Regions Research and Engineering Laboratory.
McClung, D., and Schaerer, P. (2006). The avalanche handbook, Mountaineers Books, Seattle.
Mellor, M. (1973). “Controlled release of avalanches by explosives.” Symp. on Advances in Avalanche Technology, Reno, NV, 37–49.
Mellor, M. (1985). “Blasting and blast effects in cold regions. Part 1: Air blast.”, U.S. Army Cold Regions Research and Engineering Laboratory.
Mellor, M., and Smith, N. (1967). “Airblast attenuation at low overpressures.” U.S. Cold Regions Research and Engineering Laboratory.
Miller, D. A., Tichota, R. G., and Adams, E. E. (2011). “An explicit numerical model for the study of snow’s response to explosive air blast.” Cold Reg. Sci. Technol., 69, 156–164.
Solie, D. J., Johnson, J. B., and Barrett, S. A. (1993). “The response of natural snow to explosive shock waves.” High-Pressure Science and Technology, American Institute of Physics, Melville, NY.
Ueland, J. (1992). “Effects of explosives on the mountain snowpack.” 1992 Int. Snow Science Workshop, Breckenridge, CO.
Wisotski, J., and Snyer, W. H. (1966). “A study of the effects of snow cover on high explosive blast parameters.”, Denver Research Institute, Univ. of Denver, Denver.
Information & Authors
Information
Published In
Copyright
© 2015 American Society of Civil Engineers.
History
Received: Jul 7, 2014
Accepted: Jul 22, 2015
Published online: Sep 18, 2015
Discussion open until: Feb 18, 2016
Published in print: Jun 1, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.