Developing Anti-Icing Airfield Runways Using Conductive Concrete with Renewable Energy
Publication: Journal of Cold Regions Engineering
Volume 28, Issue 2
Abstract
Snow, ice, and slush runway conditions significantly impact aircraft landing and takeoff safety. Although airport operators do an excellent job in maintaining runway safety during winter conditions, snow removal is costly and significantly impacts aircraft scheduling. This article presents using an alternative approach for snow removal with solar energy coupled with conductive concrete to develop an anti-icing airfield runway. By maintaining the runway slab surface at an above-freezing temperature, snow and ice accumulation are prevented. An anti-ice runway slab was developed during this Federal Aviation Administration (FAA) study at the University of Arkansas Engineering Research Center by supplying direct current (DC) energy from a photovoltaic energy system to a conductive concrete pavement overlay. The conductive concrete mix used for the overlay was developed during this study and is presented in this article. Experiments were conducted by supplying energy to test panels and investigating surface temperature changes. The article identifies the difficulties in developing an anti-icing system that incorporates solar energy and conductive concrete.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors are appreciative of the financial support provided by the Federal Aviation Administration. The authors thank Donald Barbagallo, Joseph Breen, and Ryan King of the Federal Aviation Administration for their guidance during this project. The authors are also appreciative for the guidance and material sample contributions by Albert Tamashausky of Asbury Graphite Mills, Inc.
References
Ayres, M., et al. (2011). “Improved models for risk assessment of runway safety areas (RSA).”, Transportation Research Board, Washington, DC.
Binghamton Univ. (2010). “FAA to fund students’ airport pavement project.” 〈http://www.binghamton.edu/inside/index.php/inside/story/faa-to-fund-students-airport-pavement-project〉 (Dec. 11, 2013).
Darwin, D., Browning, J., Gong, L., and Hughes, S. R. (2007). “Effects of deicers on concrete deterioration.” Structural engineering and materials laboratory, The Univ. of Kansas Center for Research, Lawrence, KS.
Heymsfield, E., Osweiler, A. B., Selvam, R. P., and Kuss, M. (2013). “Feasibility of anti-icing airfield pavements using conductive concrete and renewable energy.”, Federal Aviation Administration, William J. Hughes Technical Center, Atlantic city, NJ.
Keranen, P. (2000). “Automated bridge deicers in Minnesota.” 5th Int. Symp. on Snow and Ice Control Technology, Transportation Research Board, National Research Council, Wasfington, DC.
Lee, H., Cody, R. D., Cody, A. M., and Spry, P. G. (2000). “Effects of various deicing chemicals on pavement concrete deterioration.” Mid-Continent Transportation Symp. 2000 Proc., Iowa State University, Ames, Iowa, 151–155.
Lund, J. W. (1999). “Reconstruction of a pavement geothermal deicing system.” Geo. Heat Cent. Bull., 20(1), 14–17.
Lund, J. W. (2000). “Pavement snow melting.” Geo. Heat Cent. Q. Bull., 21(2), 12–19.
Roosevelt, D. (2004). “A bridge deck anti-icing system in Virginia: Lessons learned from a pilot study.”, Virginia Transportation Research Council, Charlottesville, VA.
Tuan, C. Y. (2004). “Conductive concrete for bridge deck deicing and anti-icing.”, Final Rep., Nebraska Dept. of Roads.
Tuan, C. Y. (2008a). “Roca spur bridge: The implementation of an innovative deicing technology.” J. Cold Region Eng., 22(1), 1–15.
Tuan, C. Y. (2008b). “Implementation of conductive concrete for deicing (Roca Bridge).”, Final Rep., Univ. of Nebraska, Lincoln.
Whittington, H. W., McCarter, W. J., and Forde, M. C. (1981). “The conduction of electricity through concrete.” Magaz. Concr. Res., 33(114), 48–60.
Yehia, S., Tuan, C. Y., Ferdon, D., and Chen, B. (2000). “Conductive concrete overlay for bridge deck deicing: Mixture proportioning, optimization, and properties.” ACI Mater. J., 97(2), 172–181.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Nov 2, 2012
Accepted: Dec 18, 2013
Published online: Feb 3, 2014
Published in print: Jun 1, 2014
Discussion open until: Jul 3, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.