Automated Framework to Translate Rebar Spatial Information from GPR into BIM
Publication: Journal of Construction Engineering and Management
Volume 147, Issue 10
Abstract
Automated three-dimensional (3D) as-built modeling of built infrastructure with embedded rebar is an ongoing area of research. The current practice for such a process is either highly manual, due to the need for localizing rebar during the scanning process, or not compatible with popular and widely used building information modeling (BIM) software. In order to fill the existing gap, this paper proposes a highly integrated approach that utilizes ground-penetrating radar (GPR) to detect rebar from in-service buildings and automatically translate the extracted rebar from GPR data into existing BIM. Rebar is localized through GPR data using the shearlet transform and the inverse correlation between the maximum intensity and depth parameters. To map the localized rebar into corresponding building elements in BIM, a classification system is developed based on a deep-learning algorithm trained by several on-site data sets. To evaluate the performance of the presented system, two buildings and their various concrete components are selected as the testbed. The obtained results are promising and reveal that (1) the proposed GPR2BIM system is highly automated and accurately integrates localized rebar into existing BIM; (2) the shearlet transform precisely recognizes rebar through GPR data; (3) the lowest absolute error for the depth estimation algorithm is 5.12%; and (4) rebar from GPR is automatically classified and assigned to corresponding building elements with an accuracy of 100%. The findings demonstrate that the highly integrated system developed in this research is capable of automatically building a complete BIM with both surface elements and rebar for in-service building.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Data generated or analyzed during the study are available from the corresponding author by request.
References
ACI (American Concrete Institute). 2008. Building code requirements for structural concrete. ACI 318-08. Farmington Hills, MI: ACI.
ACI (American Concrete Institute). 2014. Building code requirements for structural concrete and commentary. ACI 318-14. Farmington Hills, MI: ACI.
Agred, K., G. Klysz, and J. P. Balayssac. 2018. “Location of reinforcement and moisture assessment in reinforced concrete with a double receiver GPR antenna.” Constr. Build. Mater. 188 (Nov): 1119–1127. https://doi.org/10.1016/j.conbuildmat.2018.08.190.
Algernon, D., D. R. Hiltunen, C. C. Ferraro, and C. Ishee. 2011. “Rebar detection with cover meter and ultrasonic pulse echo combined with automated scanning system.” Transp. Res. Rec. 2251 (1): 123–131. https://doi.org/10.3141/2251-13.
Bassier, M., M. Vergauwen, and B. Van Genechten. 2017. “Automated classification of heritage buildings for as-built BIM using machine learning techniques.” ISPRS Ann. Photogramm. Remote Sens. Spatial Inf. Sci. IV-2/W2 (2W2): 25–30. https://doi.org/10.5194/isprs-annals-IV-2-W2-25-2017.
Bradley, A., H. Li, R. Lark, and S. Dunn. 2016. “BIM for infrastructure: An overall review and constructor perspective.” Autom. Constr. 71 (Part 2): 139–152. https://doi.org/10.1016/j.autcon.2016.08.019.
Braun, A., and A. Borrmann. 2019. “Combining inverse photogrammetry and BIM for automated labeling of construction site images for machine learning.” Autom. Constr. 106 (Oct): 102879. https://doi.org/10.1016/j.autcon.2019.102879.
Brilakis, I., H. Fathi, and A. Rashidi. 2011. “Progressive 3D reconstruction of infrastructure with videogrammetry.” Autom. Constr. 20 (7): 884–895. https://doi.org/10.1016/j.autcon.2011.03.005.
Bungey, J. H. 2004. “Sub-surface radar testing of concrete: A review.” Constr. Build. Mater. 18 (1): 1–8. https://doi.org/10.1016/S0950-0618(03)00093-X.
Cheng, M. Y., and N. W. Chang. 2019. “Dynamic construction material layout planning optimization model by integrating 4D BIM.” Eng. Comput. 35 (2): 703–720. https://doi.org/10.1007/s00366-018-0628-0.
Cho, K. J., and J. H. Lee. 2009. “An Efficient algorithm for rebar element generation using 3D CAD Data.” J. Comput. Struct. Eng. Inst. Korea 22 (5): 475–485.
Choi, H. C., Y. Lee, S. E. Lee, and C. K. Kim. 2014. “Development of 3-dimensional rebar detail design and placing drawing system.” J. Comput. Struct. Eng. Inst. Korea 27 (4): 289–296. https://doi.org/10.7734/COSEIK.2014.27.4.289.
Dai, F., A. Rashidi, I. Brilakis, and P. Vela. 2012. “Comparison of image-based and time-of-flight-based technologies for three-dimensional reconstruction of infrastructure.” J. Constr. Eng. Manage. 139 (1): 69–79. https://doi.org/10.1061/(ASCE)CO.1943-7862.0000565.
Daniels, D. J. 2004. Ground penetrating radar. 2nd ed. London: Institution of Electrical Engineers.
Deng, H., H. Hong, D. Luo, Y. Deng, and C. Su. 2020. “Automatic indoor construction process monitoring for tiles based on BIM and computer vision.” J. Constr. Eng. Manage. 146 (1): 04019095. https://doi.org/10.1061/(ASCE)CO.1943-7862.0001744.
Deng, M., V. J. Gan, Y. Tan, A. Joneja, and J. C. Cheng. 2019. “Automatic generation of fabrication drawings for façade mullions and transoms through BIM models.” Adv. Eng. Inf. 42 (Oct): 100964. https://doi.org/10.1016/j.aei.2019.100964.
Diaz, P. M. 2016. “Analysis of benefits, advantages and challenges of building information modelling in construction industry.” J. Adv. Civ. Eng. 2 (2): 1–11. https://doi.org/10.18831/djcivil.org/2016021001.
Dinh, K., N. Gucunski, J. Kim, and T. H. Duong. 2016. “Understanding depth-amplitude effects in assessment of GPR data from concrete bridge decks.” NDT&E Int. 83 (Oct): 48–58. https://doi.org/10.1016/j.ndteint.2016.06.004.
Dong, B., G. Shi, P. Dong, W. Ding, X. Teng, S. Qin, Y. Liu, F. Xing, and S. Hong. 2018. “Visualized tracing of rebar corrosion evolution in concrete with X-ray micro-computed tomography method.” Cem. Concr. Compos. 92 (Sep): 102–109. https://doi.org/10.1016/j.cemconcomp.2018.06.003.
Dou, Q., L. Wei, D. R. Magee, and A. G. Cohn. 2016. “Real-time hyperbola recognition and fitting in GPR data.” IEEE Trans. Geosci. Remote Sens. 55 (1): 51–62. https://doi.org/10.1109/TGRS.2016.2592679.
Gibb, S., and H. M. La. 2016. “Automated rebar detection for ground-penetrating radar.” In Proc., Int. Symp. on Visual Computing, 815–824. Cham, Switzerland: Springer.
Golparvar-Fard, M., B. Ghadimi, K. S. Saidi, G. S. Cheok, M. Franaszek, and R. R. Lipman. 2012. “Image-based 3D mapping of rebar location for automated assessment of safe drilling areas prior to placing embedments in concrete bridge decks.” In Proc., Construction Research Congress 2012: Construction Challenges in a Flat World, 960–970. Reston, VA: ASCE.
GPR (Ground Penetration Radar) Concrete. 2020. “3D GPR grid scanning.” Accessed March 2, 2020. https://gprconcrete.com/gpr/3d-gpr-grid-scanning/.
Guo, K., G. Kutyniok, and D. Labate. 2006. Sparse multidimensional representations using anisotropic dilation and shear operators. Brentwood, TN: Nashboro Press.
Guo, K., and D. Labate. 2007a. “Optimally sparse multidimensional representation using shearlets.” SIAM J. Math. Anal. 39 (1): 298–318. https://doi.org/10.1137/060649781.
Guo, K., and D. Labate. 2007b. “Sparse shearlet representation of Fourier integral operators.” Electron. Res. Announce. Math. Sci 14: 7–19.
Hajian, H., and G. Brandow. 2012. “As-built documentation of structural components for reinforced concrete construction quality control with 3D laser scanning.” In Proc., Int. Conf. on Computing Civil Engineering, 253–260. Reston, VA: ASCE. https://doi.org/10.1061/9780784412343.0032.
Harkat, H., A. Ruano, M. G. Ruano, and S. D. Bennani. 2018. “Classifier design by a multi-objective genetic algorithm approach for GPR automatic target detection.” IFAC-PapersOnLine 51 (10): 187–192. https://doi.org/10.1016/j.ifacol.2018.06.260.
Hong, S. U., J. H. Na, and Y. T. Lee. 2015. “Estimation of slab depth, column size and rebar location of concrete specimen using impact echo method.” Supplement, Mater. Res. Innovations 19 (S5): S5–1167. https://doi.org/10.1179/1432891714Z.0000000001271.
Hu, J., Q. Tang, J. O. Twumasi, and T. Yu. 2018. “Characterization of steel rebar spacing using synthetic aperture radar imaging.” In Vol. 10599 of Nondestructive Characterization and Monitoring of Advanced Materials, Aerospace, Civil Infrastructure, and Transportation XII, 1059915. Bellingham, WA: International Society for Optics and Photonics.
Kaur, P., K. J. Dana, F. A. Romero, and N. Gucunski. 2015. “Automated GPR rebar analysis for robotic bridge deck evaluation.” IEEE Trans. Cybern. 46 (10): 2265–2276. https://doi.org/10.1109/TCYB.2015.2474747.
Kharkovsky, S., J. T. Case, M. T. Ghasr, R. Zoughi, S. W. Bae, and A. Belarbi. 2012. “Application of microwave 3D SAR imaging technique for evaluation of corrosion in steel rebars embedded in cement-based structures.” In Vol. 1430 of Proc., 38th Annual Review of Progress in Quantitative Nondestructive Evaluation, 1516–1523. College Park, MD: American Institute of Physics. https://doi.org/10.1063/1.4716395.
Krizhevsky, A., I. Sutskever, and G. E. Hinton. 2012. “Imagenet classification with deep convolutional neural networks.” In Advances in neural information processing systems, 1097–1105. Lake Tahoe, NV: Winton.
Lai, W. W. L., X. Derobert, and P. Annan. 2018. “A review of Ground Penetrating Radar application in civil engineering: A 30-year journey from locating and testing to imaging and diagnosis.” NDT&E Int. 96 (Jun): 58–78. https://doi.org/10.1016/j.ndteint.2017.04.002.
Lei, W., F. Hou, J. Xi, Q. Tan, M. Xu, X. Jiang, G. Liu, and Q. Gu. 2019. “Automatic hyperbola detection and fitting in GPR B-scan image.” Autom. Constr. 106 (Oct): 102839. https://doi.org/10.1016/j.autcon.2019.102839.
Lin, Y. C., C. P. Lin, H. T. Hu, and Y. C. Su. 2018. “Developing final as-built BIM model management system for owners during project closeout.” Adv. Eng. Inf. 36 (Apr): 178–193. https://doi.org/10.1016/j.aei.2018.04.001.
Ma, X., H. Liu, M. L. Wang, and R. Birken. 2018. “Automatic detection of steel rebar in bridge decks from ground penetrating radar data.” J. Appl. Geophys. 158 (Nov): 93–102. https://doi.org/10.1016/j.jappgeo.2018.07.010.
Paetsch, O., D. Baum, S. Prohaska, K. Ehrig, D. Meinel, and G. Ebell. 2015. “3D corrosion detection in time-dependent CT images of concrete.” In Proc., Digital Industrial Radiology and Computed Tomography (DIR), 22–25. Heidelberg, Germany: Volume Graphics, Ghent.
Pasolli, E., F. Melgani, and M. Donelli. 2009. “Automatic analysis of GPR images: A pattern-recognition approach.” IEEE Trans. Geosci. Remote Sens. 47 (7): 2206–2217. https://doi.org/10.1109/TGRS.2009.2012701.
Pham, M. T., and S. Lefèvre. 2018. “Buried object detection from B-scan ground penetrating radar data using Faster-RCNN.” In Proc., IGARSS 2018-2018 IEEE Int. Geoscience and Remote Sensing Symp., 6804–6807. New York: IEEE.
Randall, T. 2011. “Construction engineering requirements for integrating laser scanning and building information modeling.” J. Constr. Eng. Manage. 137 (10): 797–805. https://doi.org/10.1061/(ASCE)CO.1943-7862.0000322.
Rashidi, A., F. Dai, I. Brilakis, and P. Vela. 2013. “Optimized selection of key frames for monocular videogrammetric surveying of civil infrastructure.” Adv. Eng. Inf. 27 (2): 270–282. https://doi.org/10.1016/j.aei.2013.01.002.
Rashidi, A., and E. Karan. 2018. “Video to BrIM: Automated 3D as-built documentation of bridges.” J. Perform. Constr. Facil. 32 (3): 04018026. https://doi.org/10.1061/(ASCE)CF.1943-5509.0001163.
Russakovsky, O., et al. 2015. “Imagenet large scale visual recognition challenge.” Int. J. Comput. Vision 115 (3): 211–252. https://doi.org/10.1007/s11263-015-0816-y.
Sherafat, B., A. Rashidi, Y. C. Lee, and C. R. Ahn. 2019. “Automated activity recognition of construction equipment using a data fusion approach.” In Computing in civil engineering 2019: Data, sensing, and analytics, 1–8. Reston, VA: ASCE. https://doi.org/10.1061/9780784482438.001.
Turkan, Y., F. Bosché, C. T. Haas, and R. Haas. 2013. “Toward automated earned value tracking using 3D imaging tools.” J. Constr. Eng. Manage. 139 (4): 423–433. https://doi.org/10.1061/(ASCE)CO.1943-7862.0000629.
Wang, C., Y. K. Cho, and C. Kim. 2015. “Automatic BIM component extraction from point clouds of existing buildings for sustainability applications.” Autom. Constr. 56 (Aug): 1–13. https://doi.org/10.1016/j.autcon.2015.04.001.
Wang, Q., J. C. Cheng, and H. Sohn. 2017. “Automated estimation of reinforced precast concrete rebar positions using laser scan data.” Comput.-Aided Civ. Infrastruct. Eng. 32 (9): 787–802. https://doi.org/10.1111/mice.12293.
Wang, X., and S. Liu. 2017. “Noise suppressing and direct wave arrivals removal in GPR data based on shearlet transform.” Signal Process. 132 (Mar): 227–242. https://doi.org/10.1016/j.sigpro.2016.05.007.
Wiwatrojanagul, P., R. Sahamitmongkol, and S. Tangtermsirikul. 2018. “A method to detect lap splice in reinforced concrete using a combination of covermeter and GPR.” Constr. Build. Mater. 173 (Jun): 481–494. https://doi.org/10.1016/j.conbuildmat.2018.04.027.
Wiwatrojanagul, P., R. Sahamitmongkol, S. Tangtermsirikul, and N. Khamsemanan. 2017. “A new method to determine locations of rebars and estimate cover thickness of RC structures using GPR data.” Constr. Build. Mater. 140 (Jun): 257–273. https://doi.org/10.1016/j.conbuildmat.2017.02.126.
Xiang, Z., G. Ou, and A. Rashidi. 2021. “Robust cascaded frequency filters to recognize rebar in GPR data with complex signal interference.” Autom. Constr. 124 (Apr): 103593. https://doi.org/10.1016/j.autcon.2021.103593.
Xiang, Z., A. Rashidi, and G. Ou. 2019a. “An improved convolutional neural network system for automatically detecting rebar in GPR data.” In Proc., Computing in Civil Engineering 2019: Data, Sensing, and Analytics. Reston, VA: ASCE. https://doi.org/10.1061/9780784482438.054.
Xiang, Z., A. Rashidi, and G. G. Ou. 2019b. “States of practice and research on applying GPR technology for labeling and scanning constructed facilities.” J. Perform. Constr. Facil. 33 (5): 03119001. https://doi.org/10.1061/(ASCE)CF.1943-5509.0001313.
Yuan, C., S. Li, H. Cai, and V. R. Kamat. 2018. “GPR signature detection and decomposition for mapping buried utilities with complex spatial configuration.” J. Comput. Civ. Eng. 32 (4): 04018026. https://doi.org/10.1061/(ASCE)CP.1943-5487.0000764.
Zhang, P., Z. Liu, Y. Wang, J. Yang, S. Han, and T. Zhao. 2018. “3D neutron tomography of steel reinforcement corrosion in cement-based composites.” Constr. Build. Mater. 162 (Feb): 561–565. https://doi.org/10.1016/j.conbuildmat.2017.12.057.
Zhao, X. 2017. “A scientometric review of global BIM research: Analysis and visualization.” Autom. Constr. 80 (Aug): 37–47. https://doi.org/10.1016/j.autcon.2017.04.002.
Zhou, F., Z. Chen, H. Liu, J. Cui, B. Spencer, and G. Fang. 2018a. “Simultaneous estimation of rebar diameter and cover thickness by a GPR-EMI dual sensor.” Sensors 18 (9): 2969. https://doi.org/10.3390/s18092969.
Zhou, X., H. Chen, and J. Li. 2018b. “An automatic GPR B-scan image interpreting model.” IEEE Trans. Geosci. Remote Sens. 56 (6): 3398–3412. https://doi.org/10.1109/TGRS.2018.2799586.
Zong, Z., C. Chen, X. Mi, W. Sun, Y. Song, J. Li, Z. Dong, R. Huang, and B. Yang. 2019. “A Deep learning approach for urban underground objects detection from vehicle-borne ground penetrating radar data in real-time.” In Proc., ISPRS-Int. Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences XLII-2/W16, 293–299. Hannover, Germany: International Society for Photogrammetry and Remote Sensing. https://doi.org/10.5194/isprs-archives-XLII-2-W16-293-2019.
Information & Authors
Information
Published In
Journal of Construction Engineering and Management
Volume 147 • Issue 10 • October 2021
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Dec 23, 2020
Accepted: Apr 27, 2021
Published online: Jul 30, 2021
Published in print: Oct 1, 2021
Discussion open until: Dec 30, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Zhongming Xiang, Ge Ou, Abbas Rashidi, An Integrated Framework for BIM Development of Concrete Buildings Containing Both Surface Elements and Rebar, IEEE Access, 10.1109/ACCESS.2023.3244689, 11, (15271-15283), (2023).