Abstract
This paper presents a method that can be used to conduct a safety risk assessment prior to the dismantling of large bulk materials handling machines. The method was developed during a dismantling project that involved the decommissioning and dismantling of two shiploaders and two stacker reclaimers that had been in operation for more than 40 years. The hazard and operability (HAZOP) risk assessment method was selected as a suitable risk assessment method. A research gap related to the availability of suitable HAZOP guide words for the safe dismantling of these machines was identified early in this project. The research method included (1) confirming the appropriateness of the HAZOP risk assessment method for this application; (2) the development and testing of a context-specific set of guide words, with input from appropriate standards; (3) applying these guide words to the dismantling HAZOP for the shiploaders; (4) incorporating lessons learned into the guide words and process for the HAZOP for the stacker reclaimers; and (5) presenting a proposed set of guide words. The proposed set of guide words may be practically applied in any dismantling project that involves large outdoor machines where the dismantling process includes a significant amount of rigging and lifting.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all of the data, models, or code generated or used during the study are proprietary or confidential in nature, and may only be provided with restrictions. Information about the Journal’s data-sharing policy can be found here: http://ascelibrary.org/doi/10.1061/(ASCE)CO.1943-7862.0001263.
Acknowledgments
This paper would not have been possible without the support and approval of Werner Nieuwoudt, Bill Murphy (RBCT), Neil Jordaan (Sandvik), Günther Güse (Sandvik), Quinton van Eeden, Pieter van Zyl (NineDot Solutions), Jaco Louw (DRA Global), Kobus Nell (NineDot Solutions), and all the other HAZOP workshop participants.
References
American Society of Safety Engineers. 2011. American national standard: ISO31010 risk assessment techniques. Des Plaines, IL: American National Standards Institute.
Bridges, W. 2008. “Selection of hazard evaluation techniques.” In Proc., ASSE Middle East Chapter Conf. Knoxville, TN: Process Improvement Institute.
BSI (British Standards Institute). 2001. Hazard and operability studies (HAZOP studies)—Application guide. BS IEC 61882:2001. London: BSI.
Cameron, I., and R. Raman. 2005. Process systems risk management. Cambridge, MA: Academic Press.
Center for Chemical Process Safety. 2008. Guidelines for hazard evaluation procedures. 3rd ed. New York: Wiley.
Construction Regulations. 2014. Occupational health and safety act: Construction regulations. Cape Town, South Africa: Dept. of Labour.
Crawley, F., and B. Tyler. 2015. HAZOP: Guide to best practice guidelines to best practice for the process and chemical industries. Amsterdam, Netherlands: Elsevier.
Gossman, D. 2009. “HAZOP—Pros and cons.” Accessed December 12, 2017. https://gcisolutions.com/library/gci_tech_notes/gcitn200903.html.
Gould, M., M. Glossop, and A. Ioannides. 2000. Review of hazard identification techniques. Sheffield, UK: Health and Safety Laboratory.
Health and Safety Executive. 2017. “Demolition—What you need to do.” Accessed August 26, 2017. http://www.hse.gov.uk/construction/safetytopics/demolition.htm.
ISHECON. 2006. Hazard and operability study manual—Six stage review system. Modderfontein, South Africa: ISHECON.
ISO. 2009. Risk management—Principles and guidelines. ISO 31000:20090. Geneva: ISO.
Kletz, T. 1997. “HAZOP—Past and future.” Reliab. Eng. Syst. Saf. 55 (3): 263. https://doi.org/10.1016/S0951-8320(96)00100-7.
Kuhl, K. 2017. “Demolitions and dismantling.” Accessed March 3, 2018. https://oshwiki.eu/wiki/Demolitions_and_dismantling.
Lawley, H. 1974. “Operability studies and hazard analysis.” Chem. Eng. Prog. 70 (4): 45–56.
Murphy, B. 2017. Reinvesting for the future of RBCT. Richards Bay, South Africa: Richards Bay Coal Terminal.
Rasmussen, B., and C. Whetton. 1997. “Hazard identification based on plant functional modelling.” Reliab. Eng. Syst. Saf. 55 (2): 77–84. https://doi.org/10.1016/S0951-8320(96)00032-4.
Richards Bay Coal Terminal. 2016. Sustainability report 2016. Richards Bay, South Africa: Richards Bay Coal Terminal.
Rimkevicius, S., M. Vaisnoras, E. Uspuras, and E. Babilas. 2015. “HAZOP application for the NPP decommissioning and dismantling projects.” In Proc., EUROSAFE Forum 2015 Conf. Brussels, Belgium: EUROSAFE.
Safe Work Australia. 2016. Demolition work: Code of practice. Canberra, Australia: Safe Work Australia.
Sandvik Mining South Africa. 2017. De-construction engineering methodology. Johannesburg, South Africa: Sandvik Mining South Africa.
Schlechter, W. 1995. “Process risk assessment—Using science to ‘do it right’.” Int. J. Press. Vessels Pip. 61 (2–3): 479–494. https://doi.org/10.1016/0308-0161(94)00123-Z.
South African Bureau of Standards. 2014. South African National Standard: ISO31010:2009 Risk management—Risk assessment techniques. Pretoria, South African: South African Bureau of Standards.
South African Government. 1993. “Occupational health and safety act.” Accessed July 2, 1993. https://www.gov.za/documents/occupational-health-and-safety-act.
Standards Australia. 2001. The demolition of structures. AS 2601-2001. Sydney, Australia: Standards Australia.
Tixier, J., G. Dusserre, O. Salvi, and D. Gaston. 2002. “Review of 62 risk analysis methodologies of industrial plants.” J. Loss Prev. Process Ind. 15 (4): 291–303. https://doi.org/10.1016/S0950-4230(02)00008-6.
van Zyl, P. 2018. Dismantling of machines at RBCT. Pretoria, South Africa: Nine Dot Solutions.
WorleyParsons. 2006. HAZOP guideline procedure. Johannesburg, South Africa: WorleyParsons.
Information & Authors
Information
Published In
Copyright
© 2020 American Society of Civil Engineers.
History
Received: Oct 31, 2019
Accepted: Jul 7, 2020
Published online: Oct 25, 2020
Published in print: Jan 1, 2021
Discussion open until: Mar 25, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.