Characteristics and Evolution of Innovative Collaboration Networks in Architecture, Engineering, and Construction: Study of National Prize-Winning Projects in China
Publication: Journal of Construction Engineering and Management
Volume 144, Issue 6
Abstract
As the scale and complexity of capital projects continue to increase, so do collaboration requirements among owners, engineers, architects, contractors, and other stakeholders in the project lifecycle. These organizational network challenges can impede successful project delivery. Innovation is a key factor in executing complex projects that require expertise from each party in a collaboration network. Unlike in many other industries, collaborations in architecture, engineering, and construction (AEC) project networks are typically temporary and require periods of intense collaboration. In an effort to understand the characteristics and evolutionary paths of innovative collaboration networks in the AEC industry, the authors collected data on more than 200 projects over a 15-year period (2000–2014) that were awarded the State Science and Technology Advancement Prize (SSTAP) of China and examine each of these as innovation collaboration cases. Social network analysis (SNA) techniques are used to understand the network characteristics and to examine the evolutionary patterns over time. The results find the studied innovative collaboration networks to be large and interwoven. Universities, with significantly greater betweenness centralities, serve as key network nodes in spreading creativity and promoting practical–theoretical integrations. This study also reveals that fewer repeated collaborations lead to more innovativeness. In other words, repeated collaborations may have a negative impact on novel and challenging AEC projects. Understanding such characteristics could promote innovations in the AEC industry and aid in the selection of strategic partners to participate in the execution of large and complex AEC projects more efficiently and effectively.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Data generated or analyzed during the study are available from the corresponding author by request. Information about the Journal’s data sharing policy can be found here: http://ascelibrary.org/doi/10.1061/%28ASCE%29CO.1943-7862.0001263.
Acknowledgments
This material is based in part upon work supported by the National Science Foundation of China under Grant Nos. 71471136, 71390523, and 71501142. Any opinions, findings, and conclusions or recommendations expressed in this material are those of the authors and do not necessarily reflect the views of the National Science Foundation of China.
References
Altshuler, A., and D. Luberoff. 2003. Mega-projects. Washington, DC: Brookings Institution.
Arditi, D., S. Kale, and M. Tangkar. 1997. “Innovation in construction equipment and its flow into the construction industry.” J. Constr. Eng. Manage. 123 (4): 371–378.
Blayse, A. M., and K. Manley. 2004. “Key influence on construction innovation.” Constr. Innovation 4 (3): 143–154.
Borgatti, S. P., M. G. Everett, and L. C. Freeman. 2002. UCINET for windows: Software for social network analysis. Natick, MA: Analytic Technologies.
Bossink, B. A. G. 2004. “Managing drivers of innovation in construction networks.” J. Constr. Eng. Manage. 130 (3): 337–345.
Bresnen, M., and N. Marshall. 2000. “Building partnerships: Case studies of client-contractor collaboration in the UK construction industry.” Constr. Manage. Econ. 18 (7): 819–832.
Bygballe, L. E., and M. Ingemansson. 2014. “The logic of innovation in construction.” Ind. Marketing Manage. 43 (3): 512–524.
Cao, D., H. Li, G. Wang, X. Luo, X. Yang, and D. Tan. 2016. “Dynamics of project-based collaborative networks for BIM implementation: Analysis based on stochastic actor-oriented models.” J. Manage. Eng. 33 (3): ..
Chau, K.-W., S. K. Wong, Y. Yau, and A. K. C. Yeung. 2016. “Determining optimal building height.” Urban Stud. 44 (3): 591–607.
Chinowsky, P. S., J. Diekmann, and J. O. Brien. 2009. “Project organizations as social networks.” J. Constr. Eng. Manage. 136 (4): 452–458.
Chinowsky, P. S., J. Diekmann, and V. Galotti. 2008. “Social network model of construction.” J. Constr. Eng. Manage. 134 (10): 804–812.
Chowdhury, A. N., P. Chen, and R. L. K. Tiong. 2011. “Analysing the structure of public-private partnership projects using network theory.” Constr. Manage. Econ. 29 (3): 247–260.
Davies, A., D. Gann, and T. Douglas. 2009. “Innovation in megaprojects: Systems integration at London Heathrow Terminal 5.” California Manage. Rev. 51 (2): 101–125.
Davies, A., and I. Mackenzie. 2014. “Project complexity and systems integration: Constructing the London 2012 Olympics and Paralympics games.” Int. J. Project Manage. 32 (5): 773–790.
Dubois, A., and L.-E. Gadde. 2002. “The construction industry as a loosely coupled system: Implications for productivity and innovation.” Constr. Manage. Econ. 20 (7): 621–631.
El Asmar, M., A. S. Hanna, and W.-Y. Loh. 2013. “Quantifying performance for the integrated project delivery system as compared to established delivery systems.” J. Constr. Eng. Manage. 139 (11): 4013012.
Flyvbjerg, B. 2014. “What you should know about megaprojects and why: An overview.” Project Manage. J. 45 (2): 6–19.
Garvin, M. J., and D. Bosso. 2008. “Assessing the effectiveness of infrastructure public-private partnership programs and projects.” Public Works Manage. Policy 13 (2): 162–178.
Gidado, K. I. 1996. “Project complexity: The focal point of construction production planning.” Constr. Manage. Econ. 14 (3): 213–225.
Gulati, R. 1995. “Social structure and alliance formation patterns: A longitudinal analysis.” Administrative Sci. Q. 40 (4): 619–652.
Gulati, R., and M. Gargiulo. 1999. “Where do interorganizational networks come from?” Am. J., Sociol. 104 (5): 1439–1493.
Harty, C. 2005. “Innovation in construction: A sociology of technology approach.” Build. Res. Inf. 33 (6): 512–522.
Heedae, P., H. H. Seung, E. M. Rojas, S. JeongWook, and J. Wooyong. 2011. “Social network analysis of collaborative ventures for overseas construction projects.” J. Constr. Eng. Manage. 137 (5): 344–355.
Holmen, E., A.-C. Pedersen, and T. Torvatn. 2005. “Building relationships for technological innovation.” J. Bus. Res. 58 (9): 1240–1250.
Hossain, L., and A. Wu. 2009. “Communications network centrality correlates to organisational coordination.” Int. J. Project Manage. 27 (8): 795–811.
Jha, S. K. (2011). “Social network perspective on innovation: A review.” In IEEE 5th Int. Conf. on Internet Multimedia Systems Architecture and Application, 1–6. Piscataway, NJ: IEEE.
Kent, D. C., and B. Becerik-Gerber. 2010. “Understanding construction industry experience and attitudes toward integrated project delivery.” J. Constr. Eng. Manage. 136 (8): 815–825.
Kratzer, J., R. T. A. J. Leenders, and J. M. L. Van Engelen. 2010. “The social network among engineering design teams and their creativity: A case study among teams in two product development programs.” Int. J. Project Manage. 28 (5): 428–436.
Lee, Y.-S., J.-J. Kim, and T. S. Lee. 2016. “Topological competiveness based on social relationships in the Korean construction-management industry.” J. Constr. Eng. Manage. 142 (11): 5016014.
Li, Y., Y. Lu, Y. H. Kwak, Y. Le, and Q. He. 2011. “Social network analysis and organizational control in complex projects: Construction of EXPO 2010 in China.” Eng. Project Organ. J. 1 (4): 223–237.
Liu, L., C. Han, and W. Xu. 2015. “Evolutionary analysis of the collaboration networks within National Quality Award Projects of China.” Int. J. Project Manage. 33 (3): 599–609.
Lu, Y., Y. Li, M. J. Skibniewski, Z. Wu, R. Wang, and Y. Le. 2014. “Information and communication technology applications in architecture, engineering, and construction organizations: A 15-year review.” J. Manage. Eng. 31 (1): 1–19.
Madlener, R., and Y. Sunak. 2011. “Impacts of urbanization on urban structures and energy demand: What can we learn for urban energy planning and urbanization management?” Sustainable Cities Soc. 1 (1): 45–53.
Moreno, J. L. 1937. “Sociometry in relation to other social sciences.” Sociometry 1 (1/2): 206–219.
Pellicer, E., V. Yepes, and R. J. Rojas. 2010. “Innovation and competitiveness in construction companies.” J. Manage. Res. 10 (2): 103–115.
Pena-Mora, F., and M. Li. 2001. “Dynamic planning and control methodology for design/build fast-track construction projects.” J. Constr. Eng. Manage. 127 (1): 1–17.
Pishdad-Bozorgi, P., J. M. la Garza, and R. B. Austin. 2016. “Readiness assessment for flash tracking.” J. Constr. Eng. Manage. 142 (12): 06016005.
Pryke, S. D. 2004. “Analysing construction project coalitions: Exploring the application of social network analysis.” Constr. Manage. Econ. 22 (8): 787–797.
Pryke, S. D. 2005. “Towards a social network theory of project governance.” Constr. Manage. Econ. 23 (9): 927–939.
Salter, A., and D. Gann. 2003. “Sources of ideas for innovation in engineering design.” Res. Policy 32 (8): 1309–1324.
Schilling, M. A., and C. C., Phelps 2007. “Interfirm collaboration network: The impact of network structure on firm innovation.” Manage. Sci. 53 (7): 1113–1126.
Schwab, A., and A. S. Miner. 2008. “Learning in hybrid project systems: The effects of project performance on repeated collaboration.” Acad. Manage. J. 51 (6): 1117–1149.
Sedita, S. R., and R. Apa. 2015. “The impact of inter-organizational relationships on contractors’ success in winning public procurement projects: The case of the construction industry in the Veneto region.” Int. J. Project Manage. 33 (7): 1548–1562.
Slaughter, E. S. 1998. “Models of construction innovation.” J. Constr. Eng. Manage. 124 (3): 226–231.
Slaughter, E. S., and H. Shimizu. 2000. “‘Clusters’ of innovations in recent long span and multi-segmental bridges.” Constr. Manage. Econ. 18 (3): 269–280.
Son, J., and E. M. Rojas. 2011. “Evolution of collaboration in temporary project teams: An agent-based modeling and simulation approach.” J. Constr. Eng. Manage. 137 (8): 619–628.
Staber, U. 2004. “Networking beyond organizational boundaries: The case of project organizations.” Creativity Innovation Manage. 13 (1): 30–40.
State Council of Chinese government. 2015. “State science and technology prize.” Accessed Nov. 1, 2015. http://www.most.gov.cn/ztzl/gjkxjsjldh/.
Tang, L., Q. Shen, and E. W. L. Cheng. 2010. “A review of studies on public-private partnership projects in the construction industry.” Int. J. Project Manage. 28 (7): 683–694.
Taylor, J. E. 2007. “Antecedents of successful three-dimensional computer-aided design implementation in design and construction networks.” J. Constr. Eng. Manage. 133 (12): 993–1002.
Taylor, J. E., and Levitt, R. E. (2004). “A new model for systemic innovation diffusion in project–based industries.” In Proc., Project Management Institute International Research Conf., London.
Veshosky, D. 1998. “Managing innovation information in engineering and construction firms.” J. Manage. Eng. 14 (1): 58–66.
Zollo, M., J. J. Reuer, and H. Singh. 2002. “Interorganizational routines and performance in strategic alliances.” Organ. Sci. 13 (6): 701–713.
Information & Authors
Information
Published In
Copyright
©2018 American Society of Civil Engineers.
History
Received: Jun 1, 2017
Accepted: Dec 13, 2017
Published online: Mar 29, 2018
Published in print: Jun 1, 2018
Discussion open until: Aug 29, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.