Float Types in Construction Spatial Scheduling
Publication: Journal of Construction Engineering and Management
Volume 142, Issue 12
Abstract
Earlier studies investigated spatial scheduling to link schedules of construction activities to workspace availability and constraints. However, previous models lacked the ability to quantify criticality in a manner similar to the critical path method. Previous spatial scheduling models did not provide seamless integration with site logistics planning of material staging and temporary facilities. This paper therefore extracts various float types that can exist in a spatial schedule. Three activity float metrics are defined using singularity functions: shift, rate, and combined floats. An algorithm is established to generate space float contours for a construction site. A validation example demonstrates the new float concepts and space float contours. This research makes two contributions to body of knowledge of construction scheduling. First, activity float metrics expand the capabilities of spatial scheduling models to assess the criticality of activities. Second, the concept of space float enables a direct integration between scheduling and other project management tasks like site layout, material logistics, and trades coordination.
Get full access to this article
View all available purchase options and get full access to this article.
References
Allen, J. F. (1983). “Maintaining knowledge about temporal intervals.” Commun. ACM, 26(11), 832–843.
Ammar, M. A. (2003). “Float analysis of non-serial repetitive activities.” Constr. Manage. Econ., 21(5), 535–542.
Awwad, R. E., and Ioannou, P. G. (2007). “P06: Floats in RSM: Repetitive scheduling method.” Proc., Constr. Research Congress, P. S. Chinowsky, A. D. Songer, and P. M. Carrillo, eds., ASCE, Reston, VA, 1133–1140.
Bafna, T. (1991). “Extending the range of linear scheduling in highway construction.” Master’s thesis, Virginia Polytechnic Institute, Blacksburg, VA.
Bansal, V. K. (2011). “Use of GIS and topology in the identification and resolution of space conflicts.” J. Comput. Civ. Eng., 159–171.
Carr, R. I., and Meyer, W. L. (1974). “Planning construction of repetitive building units.” J. Constr. Div., 100(3), 403–412.
Chrzanowski, E. N., and Johnston, D. W. (1986). “Application of linear scheduling.” J. Constr. Eng. Manage., 476–491.
Chua, D. K. H., Yeoh, K. W., and Song, Y. (2010). “Quantification of spatial temporal congestion in four-dimensional computer-aided design.” J. Constr. Eng. Manage., 641–649.
Dawood, N., and Mallasi, Z. (2006). “Construction workspace planning: Assignment and analysis utilizing 4D visualization technologies.” Comput. Aided Civ. Infrastruct. Eng., 21(7), 498–513.
Frandson, A., and Tommelein, I. D. (2014). “Development of a takt-time plan: A case study.” Proc., 2014 Construction Research Congress, B. Ashuri and J. Irizarry, eds., ASCE, Reston, VA, 1646–1655.
Guo, S.-J. (2002). “Identification and resolution of work space conflicts.” J. Constr. Eng. Manage., 287–295.
Harmelink, D. J. (2001). “Linear scheduling model: Float characteristics.” J. Constr. Eng. Manage., 255–260.
Harris, R. B., and Ioannou, P. G. (1998). “Scheduling projects with repeating activities.” J. Constr. Eng. Manage., 269–278.
Hegazy, T. M., and Elbeltagi, E. (1999). “EvoSite: Evolution-based models for site layout planning.” J. Comput. Civ. Eng., 198–206.
Kallantzis, A., and Lambropoulos, S. (2004). “Critical path determination by incorporating minimum and maximum time and distance constraints into linear scheduling.” Eng. Constr. Archit. Manage., 11(3), 211–222.
Kenley, R., and Seppänen, O. (2009). “Location-based management of construction projects: Part of a new typology for project scheduling methodologies.” Proc., 2009 41st Winter Simulation Conf., M. D. Rossetti, R. R. Hill, B. Johansson, A. Dunkin, and R. G. Ingalls, eds., IEEE, Piscataway, NJ, 2563–2570.
Lucko, G. (2007a). “Flexible modeling of linear schedules for integrated mathematical analysis.” Proc., 39th Winter Simulation Conf., S. G. Henderson, B. Biller, M. H. Hsieh, J. Shortle, J. D. Tew, and R. R. Barton, eds., IEEE, Piscataway, NJ, 2159–2167.
Lucko, G. (2007b). “Computational analysis of linear and repetitive construction project schedules with singularity functions.” Proc., 2007 Int. Workshop on Computing in Civil Engineering, L. Soibelman and B. Akinci, eds., ASCE, Reston, VA, 9–17.
Lucko, G. (2008). “Productivity scheduling method compared to linear and repetitive project scheduling methods.” J. Constr. Eng. Manage., 711–720.
Lucko, G. (2014). “Temporal constraints in linear scheduling with singularity functions: The case of calendarization.” J. Comput. Civ. Eng., 232–243.
Lucko, G., and Peña Orozco, A. A. (2009). “Float types in linear schedule analysis with singularity functions.” J. Constr. Eng. Manage., 368–377.
Lucko, G., Said, H. M. M., and Bouferguene, A. (2014). “Construction spatial modeling and scheduling with three-dimensional singularity functions.” Autom. Constr., 43, 132–143.
Macaulay, W. H. (1919). “Note on the deflection of beams.” Messenger Math., 48(9), 129–130.
O’Brien, J. J. (1975). “VPM scheduling for high-rise buildings.” J. Constr. Div., 101(4), 895–905.
Su, X., and Cai, H. (2014). “Life cycle approach to construction workspace modeling and planning.” J. Constr. Eng. Manage., 04014019.
Thabet, W. Y., and Beliveau, Y. J. (1997). “SCaRC: Space-constrained resource-constrained scheduling system.” J. Comput. Civ. Eng., 48–59.
Vico version 4 [Computer software]. Vico Software, Boulder, CO.
Winch, G. M., and North, S. (2006). “Critical space analysis.” J. Constr. Eng. Manage., 473–481.
Information & Authors
Information
Published In
Copyright
© 2016 American Society of Civil Engineers.
History
Received: Oct 20, 2015
Accepted: May 20, 2016
Published online: Jul 14, 2016
Published in print: Dec 1, 2016
Discussion open until: Dec 14, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.