Enhancing Design Management by Partnering in Delivery of International EPC Projects: Evidence from Chinese Construction Companies
Publication: Journal of Construction Engineering and Management
Volume 142, Issue 4
Abstract
The engineering-procurement-construction (EPC) approach has been increasingly adopted in competitive international markets, in which design management is critical to project performances. Existing studies have embraced a partnering strategy to integrate stakeholders’ diverse expertise and need for better solutions to design. This study has quantitatively investigated the cause-effect relationships among partnering, design management, and project outcomes by developing and testing a conceptual model. With the support of data collected from Chinese construction companies as EPC contractors, this study reveals that contractors’ design management should focus on four factors: planning and executing, resolving disputes, optimizing design, and promoting techniques . Path analysis confirms that partnering can not only significantly facilitate design management, thereby improving project outcomes, but also directly promote project performances and create long-term strategic benefits. Canonical correlation analysis further quantifies the different extents to which two groups of partnering critical success factors (CSFs) interact with four design management factors, together with their effects on five indicators of project outcomes. This research has important primary contributions to the body of knowledge by establishing interdisciplinary linkages among knowledge areas of partnering, design management and international project delivery, demonstrating the multiorganizational dynamics in delivering international EPC projects on a holistic view. Understanding the in-depth underlying causes to improve design management will be crucial for EPC contractors to optimally integrate all stakeholders’ resources into designs by considering project lifecycle processes.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
Many thanks are given to the National Natural Science Foundation of China (Grants No. 51379104, 51579135, 51079070, 50539130, 70671058), and State Key Laboratory of Hydroscience and Engineering (Grants No. 2013-KY-5, 2015-KY-5, 2009-ZY-7). Special thanks are also given to the respondents for their generous contributions during the survey.
References
AMOS version 19.0 [Computer software]. IBM, Chicago.
Anvuur, A., and Kumaraswamy, M. (2007). “Conceptual model of partnering and alliancing.” J. Constr. Eng. Manage., 225–234.
Arditi, D., Elhassan, A., and Toklu, Y. (2002). “Constructability analysis in the design firm.” J. Constr. Eng. Manage., 117–126.
Atkinson, R. (1999). “Project management: Cost, time and quality, two best guesses and a phenomenon, its time to accept other success criteria.” Int. J. Proj. Manage., 17(6), 337–342.
Black, C., Akintoye, A., and Fitzgerald, E. (2000). “An analysis of success factors and benefits of partnering in construction.” Int. J. Proj. Manage., 18(6), 423–434.
Chan, A., Scott, D., and Lam, E. (2002). “Framework of success criteria for design/build projects.” J. Manage. Eng., 120–128.
Chan, A. P. C. (2000). “Evaluation of enhanced design and build system—A case study of a hospital project.” Constr. Manage. Econ., 18(7), 863–871.
Chan, E., Chan, A., and Yu, A. (2005). “Design management in design and build projects: The new role of the contractor.” Construction Research Congress 2005, ASCE, Reston, VA, 1–11.
Chang, X., Liu, X., and Zhou, W. (2010). “Hydropower in China at present and its further development.” Energy, 35(11), 4400–4406.
Chapman, R. J. (2001). “The controlling influences on effective risk identification and assessment for construction design management.” Int. J. Proj. Manage., 19(3), 147–160.
Chen, C., and Orr, R. J. (2009). “Chinese contractors in Africa: Home government support, coordination mechanisms, and market entry strategies.” J. Constr. Eng. Manage., 1201–1210.
Cheng, E., and Li, H. (2002). “Construction partnering process and associated critical success factors: Quantitative investigation.” J. Manage. Eng., 194–202.
Cheung, S., Ng, T. S. T., Wong, S., and Suen, H. C. H. (2003). “Behavioral aspects in construction partnering.” Int. J. Project Manage., 21(5), 333–343.
Cho, K., Hyun, C., Koo, K., and Hong, T. (2010). “Partnering process model for public-sector fast-track design-build project in Korea.” J. Manage. Eng., 19–29.
Chua, D., Tyagi, A., Ling, S., and Bok, S. (2003). “Process-parameter-interface model for design management.” J. Constr. Eng. Manage., 653–663.
CII (Construction Industry Institute). (1991). “In search of partnering excellence.”, Univ. of Texas, Austin, TX.
Deshpande, A., Salem, O., and Miller, R. (2012). “Analysis of the higher-order partial correlation between CII best practices and performance of the design phase in fast-track industrial projects.” J. Constr. Eng. Manage., 716–724.
El-adaway, I. (2010). “Guidelines for a standard project partnering contract.” Construction Research Congress 2010, ASCE, Reston, VA, 919–928.
Ernzen, J., and Schexnayder, C. (2000). “One company’s experience with design/build: Labor cost risk and profit potential.” J. Constr. Eng. Manage., 10–14.
Galloway, P. (2009). “Design-build/EPC contractor’s heightened risk—Changes in a changing world.” J. Leg. Aff. Dispute Resolut. Eng. Constr., 7–15.
Georgy, M., Chang, L., and Zhang, L. (2005). “Utility-function model for engineering performance assessment.” J. Constr. Eng. Manage., 558–568.
Girmscheid, G., and Brockmann, C. (2010). “Inter- and intraorganizational trust in international construction joint ventures.” J. Constr. Eng. Manage., 353–360.
Grau, D., Back, W., and Prince, J. (2012). “Benefits of on-site design to project performance measures.” J. Manage. Eng., 232–242.
Guion, L. A., Diehl, D. C., and McDonald, D. (2011). “Triangulation: Establishing the validity of qualitative studies.” Dept. of Family, Youth and Community Sciences, Florida Cooperative Extension Service, Institute of Food and Agricultural Sciences, Univ. of Florida, Gainesville, FL.
Guo, Q., Xu, Z. P., Zhang, G. F., and Tu, T. T. (2010). “Comparative analysis between the EPC contract mode and the traditional mode based on the transaction cost theory.” IEEE 17th Int. Conf. on Industrial Engineering and Engineering Management, IEEE, New York, 191–195.
Hale, D., Shrestha, P., Gibson, G., Jr., and Migliaccio, G. (2009). “Empirical comparison of design/build and design/bid/build project delivery methods.” J. Constr. Eng. Manage., 579–587.
Hardoon, D., Szedmak, S., and Shawe-Taylor, J. (2004). “Canonical correlation analysis: An overview with application to learning methods.” Neural Comput., 16(12), 2639–2664.
Hong, Y., Chan, D. W. M., Chan, A. P. C., and Yeung, J. F. Y. (2012). “Critical analysis of partnering trend in construction journals.” J. Manage. Eng., 82–95.
Jacobsson, M., and Roth, P. (2014). “Towards a shift in mindset: Partnering projects as engagement platforms.” Constr. Manage. Econ., 32(5), 419–432.
Kadefors, A. (2004). “Trust in project relationships—Inside the black box.” Int. J. Proj. Manage., 22(3), 175–182.
Lam, P., Wong, F., and Chan, A. (2006). “Contributions of designers to improving buildability and constructability.” Des. Stud., 27(4), 457–479.
Lopez, R., and Love, P. (2012). “Design error costs in construction projects.” J. Constr. Eng. Manage., 585–593.
Lopez, R., Love, P., Edwards, D., and Davis, P. (2010). “Design error classification, causation, and prevention in construction engineering.” J. Perform. Constr. Facil., 399–408.
Love, P., Lopez, R., Kim, J., and Kim, M. (2014a). “Probabilistic assessment of design error costs.” J. Perform. Constr. Facil., 518–527.
Love, P., Lopez, R., Kim, J. T., and Kim, M. (2014b). “Influence of organizational and project practices on design error costs.” J. Perform. Constr. Facil., 303–310.
Love, P. E. D., Holt, G. D., and Li, H. (2002). “Triangulation in construction management research.” Eng., Constr. Archit. Manage., 9, 294–303.
Mitropoulos, P., and Namboodiri, M. (2011). “New method for measuring the safety risk of construction activities: Task demand assessment.” J. Constr. Eng. Manage., 30–38.
Mohammadreza, P., Hiroaki, M., and Ebrahim, T. (2013). “A comparative framework for measuring project success.” Innovation Supply Chain Manage., 7(1), 6–18.
Palacios, J., Gonzalez, V., and Alarcón, L. (2014). “Selection of third-party relationships in construction.” J. Constr. Eng. Manage., B4013005.
Pulaski, M., and Horman, M. (2005). “Organizing constructability knowledge for design.” J. Constr. Eng. Manage., 911–919.
Reina, P., and Tulacz, G. (2011). “The top 225 international contractors.”, Transportation, New York.
Roos, M., and Kallis, K. (2012). “Building ‘constructability’ into the design.” Electrical Transmission and Substation Structures 2012, Columbus, OH, 323–335.
Rosner, J., Thal, A., Jr., and West, C. (2009). “Analysis of the design-build delivery method in air force construction projects.” J. Constr. Eng. Manage., 710–717.
Schultzel, H. J., and Unruh, V. P. (1996). Successful partnering—Fundamentals for project owners and contractors, Wiley, New York.
Shenhar, A., Levy, O., and Dvir, D. (1997). “Mapping the dimensions of project success.” Project Manage. J., 28(2), 5–13.
Soibelman, L., Liu, L., Kirby, J., East, E., Caldas, C., and Lin, K. (2003). “Design review checking system with corporate lessons learned.” J. Constr. Eng. Manage., 475–484.
Song, L., Mohamed, Y., and AbouRizk, S. (2009). “Early contractor involvement in design and its impact on construction schedule performance.” Int. J. Proj. Manage., 25(1), 12–20.
SPSS version 21.0 [Computer software]. IBM, Chicago.
Stevanovic, A., Martin, P., and Disegni, R. (2005). “Comparative analysis of travel impacts between the design-build and traditional building methods.” J. Transp. Eng., 708–716.
Tang, W., Duffield, C., and Young, D. (2006). “Partnering mechanism in construction: An empirical study on the Chinese construction industry.” J. Constr. Eng. Manage., 217–229.
Tang, W., Qiang, M., Duffield, C., Young, D., and Lu, Y. (2007). “Risk management in the Chinese construction industry.” J. Constr. Eng. Manage., 944–956.
Tang, W., Qiang, M., Duffield, C., Young, D., and Lu, Y. (2008). “Incentives in the Chinese construction industry.” J. Constr. Eng. Manage., 457–467.
Tang, W., Qiang, M., Duffield, C., Young, D., and Lu, Y. (2009). “Enhancing total quality management by partnering in construction.” J. Prof. Issues Eng. Educ. Pract., 129–141.
Thompson, P., and Sanders, S. (1998). “Peer-reviewed paper: Partnering continuum.” J. Manage. Eng., 73–78.
Wang, S., Tang, W., and Li, Y. (2013). “Relationship between owners’ capabilities and project performance on development of hydropower projects in China.” J. Constr. Eng. Manage., 1168–1178.
Wang, Z., and Soh, C. (2001). “Managing design changes for multiview models.” J. Comput. Civ. Eng., 102–111.
Wong, P., Cheung, S., and Fan, K. (2009). “Examining the relationship between organizational learning styles and project performance.” J. Constr. Eng. Manage., 497–507.
Yeo, K., and Ning, J. (2002). “Integrating supply chain and critical chain concepts in engineer-procure-construct (EPC) projects.” Int. J. Proj. Manage., 20(4), 253–262.
Yeung, J., Chan, A., and Chan, D. (2009). “Developing a performance index for relationship-based construction projects in Australia: Delphi study.” J. Manage. Eng., 59–68.
Zhang, Y., and Sun, K. (2011). “Top 225 international contractors in 2011 ENR report.” J. Eng. Manage., 25(5), 584–590.
Information & Authors
Information
Published In
Journal of Construction Engineering and Management
Volume 142 • Issue 4 • April 2016
Copyright
© 2015 American Society of Civil Engineers.
History
Received: Dec 21, 2014
Accepted: Sep 3, 2015
Published online: Dec 14, 2015
Published in print: Apr 1, 2016
Discussion open until: May 14, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.