Simulation-Based and Statistical Analysis of the Learning Effect in Floating Caisson Construction Operations
Publication: Journal of Construction Engineering and Management
Volume 140, Issue 1
Abstract
The learning curve theory is implemented for the assessment and prediction of performance in repetitive and complex construction operations. The purpose of this study is to explore the applicability of learning curve concepts for the fabrication of floating caissons, a construction activity that has not been adequately explored in the published literature. Although standard statistics and simulation methods have been used, a direct comparison of the produced results, along with their emerging inferences, is attempted for the first time. In addition, simulation modeling is used to predict future performance within the learning curve paradigm. An extended version of an existing simulation platform (CaissonSim) is used to execute the computations. A straight-line model is applied to quantify the improvements in productivity and the dynamically changing learning rates. A comparative analysis of the results has shown that both the statistical and simulation-based approaches have yielded satisfactory results, although the level of accuracy and variability is differentiated. Thus, it is suggested that the synergetic implementation of both methods of analysis is more beneficial because, when combined, they provide a robust analytical framework.
Get full access to this article
View all available purchase options and get full access to this article.
References
Couto, J. P., and Teixeira, J. C. (2005). “Using linear model for learning curve effect on highrise floor construction.” Constr. Manage. Econ., 23(4), 355–364.
Everett, J. G., and Farghal, S. (1994). “Learning curve predictors for construction field operations.” J. Constr. Eng. Manage., 120(3), 603–616.
Everett, J. G., and Farghal, S. (1997). “Data representation for predicting performance with learning curves.” J. Constr. Eng. Manage., 123(1), 46–52.
Farghal, S., and Everett, J. G. (1997). “Learning curves: Accuracy in predicting future performance.” J. Constr. Eng. Manage., 123(1), 41–45.
Hijazi, A. M., AbouRizk, S. M., and Halpin, D. W. (1992). “Modeling and simulating learning development in construction.” J. Constr. Eng. Manage., 118(4), 685–700.
Hinze, J., and Olbina, S. (2009). “Empirical analysis of the learning curve principle in prestressed concrete piles.” J. Constr. Eng. Manage., 135(5), 425–431.
Jarkas, A., and Horner, M. (2011). “Revisiting the applicability of learning curve theory to formwork labour productivity.” Constr. Manage. Econ, 29(5), 483–493.
JMP [Computer software] (2013). “JMP statistical discovery software.” SAS Institute Inc., Cary, NC.
Lutz, J. D., Halpin, D. W., and Wilson, J. R. (1994). “Simulation of learning development in repetitive construction.” J. Constr. Eng. Manage., 120(4), 753–773.
Manoliadis, O. G., and Pantouvakis, J. P. (2003). “System-based vision for strategic and creative design.” Proc., Int. Conf. on Structural Engineering and Construction, F. Bontempi, ed., Vol 1–3, A. A. Balkema, Rotterdam, 2521.
Maravas, A., and Pantouvakis, J. P. (2011). “Fuzzy repetitive scheduling method for projects with repeating activities.” J. Constr. Eng. Manage., 137(7), 561–564.
Martinez, J. C. (1996). “STROBOSCOPE: State and resource based simulation of construction processes.” Ph.D. dissertation, Dept. of Civil Engineering, Univ. of Michigan, Ann Arbor, MI.
Martinez, J. C., and Ioannou, P. G. (1999). “General purpose systems for effective construction simulation.” J. Constr. Eng. Manage., 125(4), 265–276.
Naresh, A. L., and Jahren, C. T. (1999). “Learning outcomes from construction simulation modeling.” Civil. Eng. Environ. Syst., 16(2), 129–144.
Pantouvakis, J. P., and Panas, A. (2010). “The contribution of health and safety management to sustainable development: A case study from the construction industry.” Proc., IPMA Expert Seminar, International Project Management Association, Nijkerk, The Netherlands, 52–62.
Pantouvakis, J. P., and Panas, A. (2013). “Computer simulation and analysis framework for floating caissons construction operations.” Autom. Constr., in press.
Pellegrino, R., Costantino, N., Pietroforte, R., and Sancilio, S. (2012). “Construction of multi-storey concrete structures in Italy: Patterns of productivity and learning curves.” Constr. Manage. Econ, 30(2), 103–115.
Shan, Y., Goodrum, P. M., Zhai, D., Haas, C., and Caldas, C. H. (2011). “The impact of management practices on mechanical construction productivity.” Constr. Manage. Econ, 29(3), 305–316.
Thomas, H. R. (2009). “Construction learning curves.” Pract. Period. Struct. Des. Constr., 14(1), 14–20.
Thomas, H. R., Mathews, C. T., and Ward, J. G. (1986). “Learning curve models of construction productivity.” J. Constr. Eng. Manage., 112(2), 245–258.
Zayed, T., Sharifi, M. R., Baciu, S., and Amer, M. (2008). “Slip-form application to concrete structures.” J. Constr. Eng. Manage., 134(3), 157–168.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Dec 19, 2012
Accepted: Jul 26, 2013
Published online: Aug 30, 2013
Published in print: Jan 1, 2014
Discussion open until: Jan 30, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.