Abstract
Construction operations have been modeled and simulated using discrete-event simulations with effectiveness and fidelity that have continuously increased over the past four decades. Today, it is possible to model construction operations so that its discrete components are represented very faithfully. However, construction operations often include activities that are simultaneously continuous and stochastic in nature. These continuous activities have typically been modeled by discretization and in some cases using combined discrete-continuous simulation. The current literature does not discuss the series of important statistical issues, such as divisibility of fitted distributions and a significant possibility of the discretized activities not being independent and identically distributed, which are brought along by discretization and can significantly impact the results of the simulation study. Combined discrete-continuous simulations have treated the continuous portion dynamically (i.e., based on differential equations of rate change) but either deterministically or disrespecting statistical properties of the underlying continuous stochastic process and its interactions with the discrete portion. These approaches can seriously affect the accuracy of the model in representing the system behavior, grossly impact the simulation results, and can be detrimental to the acceptance of the model due to difficulties in verification and validation. A clear understanding of the underlying problems is thus required when modeling simultaneously continuous and stochastic activities. This paper investigates the major issues associated with modeling continuous stochastic construction activities that have been traditionally modeled using discrete-event methods. This paper contributes to the body of knowledge by identifying the issues pertaining to and impacts of discretization of continuous activities. The paper improves awareness of these issues that have been ignored or not understood by previous studies and help future researchers in building valid and credible simulation models. The paper also demonstrates the effect of discretization on the behavior of the model and the simulation results using a case study of a road-paving operation.
Get full access to this article
View all available purchase options and get full access to this article.
References
AbouRizk, S. M., and Wales, R. J. (1997). “Combined discrete-event/continuous simulation for project planning.” J. Constr. Eng. Manage., 123(1), 11–20.
Biller, B., and Nelson, B. L. (2002). “Answers to the top ten input modeling questions.” Proc., 2002 Winter Simulation Conf., IEEE, 35–40.
Box, G. E., Jenkins, G. M., and Reinsel, G. C. (1994). Time series analysis: Forecasting and control, 3rd Ed., Prentice Hall, Englewood Cliffs, NJ.
Cario, M. C., and Nelson, B. L. (1996). “Autoregressive to anything: Time-series input processes for simulation.” Oper. Res. Lett., 19(2), 51–58.
Chang, D. Y. (1986). “RESQUE: A resource based simulation system for construction process planning.” Ph.D. dissertation, Univ. of Michigan, Ann Arbor, MI.
Chua, D. K. H., and Li, G. M. (2002). “RISim: Resource-interacted simulation modeling in construction.” J. Constr. Eng. Manage., 128(3), 195–202.
Hajjar, D., and AbouRizk, S. (1999). “Simphony: An environment for building special purpose construction simulation tools.” Proc., of the 1999 Winter Simulation Conf., IEEE, 998–1006.
Halpin, D. W. (1974). “CYCLONE—A graphical method for simulation modeling of construction operations.” Proc., 2nd Inter-American Conf. on Systems and Informatics, Mexico City, Mexico, 15.
Hassan, M. M., and Gruber, S. (2007). “Estimation of concrete paving construction productivity using discrete event simulation.” Proc., 43th Annual Conf. of the Associated Schools of Construction, Associated Schools of Construction, Windsor, CO.
Inlow, M. (2006). “Teaching the IID assumption in engineering statistics I.” 2006 American Society of Engineering Education Annual Conf., American Society of Engineering Education, Washington, DC.
Law, A. M., and Kelton, W. D. (2001). Simulation modeling and analysis, 3rd Ed., McGraw-Hill, New York.
Lewis, P. A., McKenzie, E., and Hugus, D. K. (1989). “Gamma processes.” Commun. Stat. Stoch. Models, 5(1), 1–30.
Liu, L. Y. (1991). “COOPS: Construction object oriented simulation system.” Ph.D. dissertation, Univ. of Michigan, Ann Arbor, MI.
Livny, M., Melamed, B., and Tsiolis, A. K. (1993). “The impact of autocorrelation on queuing systems.” Manage. Sci., 39(3), 322–339.
Lu, M. (2003). “Simplified discrete-event simulation approach for construction simulation.” J. Constr. Eng. Manage., 129(5), 537–546.
Lu, M., Lau, S. C., and Chan, E. K. (2007). “Combined simulation modeling using simplified discrete event simulation approach: A mining case study.” Proc., 2007 Summer Computer Simulation, Society for Computer Simulation International, San Diego, CA, 421–428.
Martinez, J. C. (1996). “STROBOSCOPE: State and resource based simulation of construction processes.” Ph.D. dissertation, Univ. of Michigan, Ann Arbor, MI.
Martinez, J. C. (1998). “EZStrobe—General-purpose simulation system based on activity cycle diagrams.” Proc., 1998 Winter Simulation Conf., IEEE, 341–348.
Martinez, J. C. (2010). “Methodology for conducting discrete-event simulation studies in construction engineering and management.” J. Constr. Eng. Manage., 136(1), 3–16.
Martinez, J. C., and Ioannou, P. G. (1994). “General purpose simulation with stroboscope.” Winter Simulation Conf., IEEE, 1159–1166.
Mawlana, M., Hammad, A., Doriani, A., and Setayeshghar, S. (2012). “Discrete event simulation and 4D modelling for elevated highway reconstruction projects.” 14th Int. Conf. on Computing in Civil and Building Engineering, ASV, Moscow.
McCahill, D. F., and Bernold, L. E. (1993). “Resource-oriented modeling and simulation in construction.” J. Constr. Eng. Manage., 119(3), 590–606.
Melamed, B. (1991). “TES: A class of methods for generating autocorrelated uniform variates.” ORSA J. Comput., 3(4), 317–329.
Moran, P. A. (1950). “Notes on continuous stochastic phenomena.” Biometrika, 37(1–2), 17–23.
Odeh, A. M. (1992). “Construction integrated planning and simulation model.” Ph.D. dissertation, Univ. of Michigan, Ann Arbor, MI.
Paulson, B. C., Douglas, S. A., Kalk, A., Touran, A., and Victor, G. A. (1983). “Simulation and analysis of construction operations.” J. Tech. Top. Civil Eng., 109(2), 89–104.
Peña-Mora, F., Han, S., Lee, S., and Park, M. (2008). “Strategic-operational construction management: Hybrid system dynamics and discrete event approach.” J. Constr. Eng. Manage., 134(9), 701–710.
Polat, G., and Buyuksaracoglu, Y. (2009). “Using discrete-event simulation for process modeling: Case of work structuring of asphalt highway construction operations.” Proc., 26th Int. Conf. on IT in Construction, CRC Press, Istanbul, Turkey, 545–552.
Rekapalli, P. V. (2008). “Discrete-event simulation based virtual reality environments for construction operations.” Ph.D. dissertation, Purdue Univ., West Lafayette, IN.
Shi, J., and AbouRizk, S. (1998). “Continuous and combined event-process models for simulating pipeline construction.” Constr. Manage. Econ., 16(4), 489–498.
Shumway, R. H., and Stoffer, D. S. (2006). Time series and its applications: With R examples, Springer, New York.
Vincent, S. (1998). “Input data analysis.” Chapter 3, The handbook of simulation, Wiley, New York, 55–91.
Information & Authors
Information
Published In
Journal of Construction Engineering and Management
Volume 139 • Issue 8 • August 2013
Pages: 1037 - 1045
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Oct 5, 2011
Accepted: Nov 29, 2012
Published online: Dec 1, 2012
Discussion open until: May 1, 2013
Published in print: Aug 1, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.