Projectwide Access: Key to Effective Implementation of Construction Project Management Software Systems
Publication: Journal of Construction Engineering and Management
Volume 139, Issue 5
Abstract
Construction engineering and management experts asserted in the 1980s that computer-based information and communication technologies (ICTs) would grow quickly to increase the efficiency of communications in the architecture, engineering, and construction (AEC) industry. Since that time, many studies have measured the rate of adoption and effectiveness of these tools. Recently, studies have noted that these tools are not being used ubiquitously and have yet to reach their full potential in increasing the efficiency of intercompany communications. The present research employed the Delphi method with a panel of AEC industry professionals to address barriers and facilitators of using project-based project management software systems (PMSS), including issues of access to PMSS and how project-based access would affect the efficiency with which information can be communicated. The results of this research indicate that data reentry is a common source of inefficiency in the use of PMSS and that future construction ICT developments should focus on implementing a more collaborative, project-based PMSS that allows direct and active access to the PMSS by all project team members. However, governance issues may be preventing more widespread use of a collaborative PMSS implementation model. Specifically, the respondents felt that general contractors should maintain their roles as managers and controllers of the PMSS.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors are grateful to Professor Matthew Hallowell for his assistance with structuring the research method. We would also like to thank the Delphi panelists and the general-contractor and software-vendor interviewees.
References
Abudayyeh, O. Y., and Rasdorf, W. J. (1991). “Design of construction industry information management systems.” J. Constr. Eng. Manage., 117(4), 698–715.
Ahuja, V., Yang, J., and Shankar, R. (2009). “Study of ICT adoption for building project management in the Indian construction industry.” Autom. Constr., 18(4), 415–423.
Arditi, D., and Gunaydin, H. M. (1999). “Perceptions of process quality in building projects.” J. Manage. Eng., 15(2), 43–53.
Baldwin, A. N., Thorpe, A., and Carter, C. (1999). “The use of electronic information exchange on construction alliance projects.” Autom. Constr., 8(6), 651–662.
Chan, A., Yung, E., Lam, P., Tam, C. M., and Cheung, S. O. (2001). “Application of Delphi method in selection of procurement systems for construction projects.” Constr. Manage. Econ., 19(7), 699–718.
Chung, B., Skibniewski, M. J., and Kwak, Y. H. (2009). “Developing ERP systems success model for the construction industry.” J. Constr. Eng. Manage., 135(3), 207–216.
Chung, B. Y., Ski, M., Lucas, H. C., Jr., and Kwak, Y. H. (2008). “Analyzing enterprise resource planning system implementation success factors in the engineering-construction industry.” J. Comput. Civ. Eng., 22(6), 373–382.
Davis, K. A., and Songer, A. D. (2009). “Resistance to IT change in the AEC industry: Are the stereotypes true?” J. Constr. Eng. Manage., 135(12), 1324–1333.
Dossick, C. S., and Neff, G. (2010). “Organizational divisions in BIM-enabled commercial construction.” J. Constr. Eng. Manage., 136(4), 459–467.
Dossick, C. S., and Sakagami, M. (2008). “Implementing web-based project management systems in the United States and Japan.” J. Constr. Eng. Manage., 134(3), 189–196.
Ferratt, T. W., Ahire, S., and De, P. (2006). “Achieving success in large projects: Implications from a study of ERP implementations.” Interfaces, 36(5), 458–469.
Froese, T. (2005). “Impact of emerging information technology on information management.” Computing in Civil Engineering—Int. Conf. on Computing in Civil Engineering, ASCE, Reston, VA, 10.
Froese, T. (2006). “Emerging information and communication technologies and the discipline of project information management.” 13th EG-ICE Workshop, Intelligent Computing in Engineering and Architecture, Springer, Berlin/Heidelberg, 230–240.
Froese, T. M. (2010). “The impact of emerging information technology on project management for construction.” Autom. Constr., 19(5), 531–538.
Hallowell, M. R., and Gambatese, J. A. (2009). “Construction safety risk mitigation.” J. Constr. Eng. Manage., 135(12), 1316–1323.
Hallowell, M. R., and Gambatese, J. A. (2010). “Qualitative research: Application of the Delphi method to CEM research.” J. Constr. Eng. Manage., 136(1), 99–107.
Hartmann, T., and Fischer, M. (2009). “A process view on end user resistance during construction IT implementations.” J. Inf. Technol., 14, 353–365.
Hjelt, M., and Björk, B. C. (2006). “Experiences of EDM usage in construction projects.” J. Inf. Technol., 11, 113–125.
Howard, H. C., Levitt, R. E., Paulson, B. C., Pohl, J. G., and Tatum, C. B. (1989). “Computer integration: Reducing fragmentation in AEC industry.” J. Comput. Civ. Eng., 3(1), 18–32.
Hu, W., and Zhou, M. (2009). “An integrated and comprehensive information management model for construction project lifecycle.” Proc., Int. Conf. on Management and Service Science, IEEE, New York, 1–4.
“Information technology.” (2012). Merriam-Webster Online Dictionary, 〈http://www.merriam-webster.com/dictionary/information%20technology〉 (May 3, 2012).
Jung, Y., and Gibson, G. E. (1999). “Planning for computer integrated construction.” J. Comput. Civ. Eng., 13(4), 217–225.
Kale, S., and Arditi, D. (2010). “Innovation diffusion modeling in the construction industry.” J. Constr. Eng. Manage., 136(3), 329–340.
Kang, Y., O’Brien, W. J., Thomas, S., and Chapman, R. E. (2008). “Impact of information technologies on performance: Cross-study comparison.” J. Constr. Eng. Manage., 134(11), 852–863.
Linstone, H. A., and Turoff, M., eds. (2002). “The Delphi method: Techniques and applications.” 〈http://is.njit.edu/pubs/delphibook/〉 (Jun. 21, 2011).
Mitropoulos, P., and Tatum, C. B. (2000). “Forces driving adoption of new information technologies.” J. Constr. Eng. Manage., 126(5), 340–348.
Molenaar, K. R., and Songer, A. D. (2001). “Web-based decision support systems: Case study in project delivery.” J. Comput. Civ. Eng., 15(4), 259–267.
National Institute of Standard, and Technology (NIST). (2004). “Cost analysis of inadequate interoperability in the U.S. capital facilities industry.” NIST GCR 04-867, Gaithersburg, MD.
Nitithamyong, P., and Skibniewski, M. J. (2004). “Web-based construction project management systems: How to make them successful?” Autom. Constr., 13(4), 491–506.
Nitithamyong, P., and Skibniewski, M. J. (2006). “Success/failure factors and performance measures of web-based construction project management systems: Professionals’ viewpoint.” J. Constr. Eng. Manage., 132(1), 80–87.
O’Connor, J. T., and Yang, L. R. (2004). “Project performance versus use of technologies at project and phase levels.” J. Constr. Eng. Manage., 130(3), 322–329.
RAND Corporation. (2011). “Delphi method.” 〈http://www.rand.org/topics/delphi-method.html〉 (Apr. 28, 2011).
Rojas, E. M., and Songer, A. D. (1999). “Web-centric systems: A new paradigm for collaboration engineering.” J. Manage. Eng., 15(1), 39–45.
Rowings, J. E., Jr. (1991). “Project-controls systems opportunities.” J. Constr. Eng. Manage., 117(4), 691–697.
Salem, O., and Mohanty, S. (2008). “Project management practices and information technology research.” J. Constr. Eng. Manage., 134(7), 501–508.
Sillars, D. N., and Hallowell, M. R. (2009). “Opinion-based research: Lessons learned from four approaches.” Proc., Construction Research Congress, ASCE, Reston, VA, 1499–1508.
Stewart, R. A., and Mohamed, S. (2004). “Evaluating web-based project information management in construction: Capturing the long-term value creation process.” Autom. Constr., 13(4), 469–479.
Tatari, O., Castro-Lacouture, D., and Skibniewski, M. J. (2007). “Current state of construction enterprise information systems: Survey research.” Constr. Innovation Inf. Process Manage., 7(4), 310–319.
Taylor, J. E., and Levitt, R. E. (2005). “Inter-organizational knowledge flow and innovation diffusion in project-based industries.” Proc., 38th Hawaii Int. Conf. on System Sciences, IEEE, New York, 1–10.
Thomas, S. R., Lee, S.-H., Spencer, J. D., Tucker, R. L., and Chapman, R. E. (2004). “Impacts of design/information technology on project outcomes.” J. Constr. Eng. Manage., 130(4), 586–597.
Zhai, D., Goodrum, P. M., Haas, C. T., and Caldas, C. H. (2009). “Relationship between automation and integration of construction information systems and labor productivity.” J. Constr. Eng. Manage., 135(8), 746–753.
Zoomerang [Computer software]. SurveyMonkey, Palo Alto, CA.
Information & Authors
Information
Published In
Journal of Construction Engineering and Management
Volume 139 • Issue 5 • May 2013
Pages: 510 - 518
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Nov 30, 2011
Accepted: Jul 30, 2012
Published online: Aug 2, 2012
Published in print: May 1, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.