Causes and Penalties of Variation: Case Study of a Precast Concrete Slab Production Facility
Publication: Journal of Construction Engineering and Management
Volume 138, Issue 6
Abstract
Concrete precast plants require strict control over and adherence to the timing and sequence of operations. Variation for this research is divided into the variation in task starting time (the difference between the planned and the actual starting time) and the variation in task duration (the difference between the planned and the actual task duration). This study determined causes of variation in task starting time and duration of precast concrete slab production tasks. It also identified penalties associated with not reducing variation, which include an increase in project duration, Work in-Progress (WIP) and cost and a decrease in labor productivity. Additionally, two execution policies (keeping laborers waiting before preconditions are ready and keeping laborers busy) in the face of variation were compared by using STROBOSCOPE simulation techniques. It was found that simply keeping workers busy is insufficient for managing variation. Management effort should be devoted to eliminate causes of variation in the planning stage to make a reliable work plan. The results will help prefabricators to understand causes and penalties of variation, which is the starting point of attacking and reducing it. Although this study is based on a concrete slab production facility, this research can have a broader effect on the construction industry because the research method and simulation models developed in this study are applicable to other fabrication processes as well.
Get full access to this article
View all available purchase options and get full access to this article.
References
Ballard, G. (2000). “The last planner system of production control.” Ph.D. thesis, Univ. of Birmingham, Birmingham, UK.
Ballard, G., Harper, N., and Zabelle, T. (2003). “Learning to see work flow: An application of lean concepts to precast concrete fabrication.” Eng. Construct. Architect. Manage., 10(1), 6–14.
Ballard, G., and Howell, G. (1998). “Shielding production: Essential step in production control.” J. Constr. Eng. Manage.JCEMD4, 124(1), 11–17.
Ballard, G., and Howell, G. (2003). “An update on last planner.” Proc., 11th Annual Conf. of the Int. Group for Lean Construction, IGLC, Blacksburg, VA.
Ballard, G., Koskela, L., Howell, G. A., and Tommelein, I. D. (2005). “Discussion of ‘Improving labor flow reliability for better productivity as lean construction principle’.” J. Constr. Eng. Manage.JCEMD4, 131(5), 615–616.
Chua, D. K. H., Shen, L. J., and Bok, S. H. (2003). “Constraint-based planning with integrated production scheduler over Internet.” J. Constr. Eng. Manage.JCEMD4, 129(3), 293–301.
Dai, J., Goodrum, P. M., and Maloney, W. F. (2009a). “Construction craft workers’ perceptions of the factors affecting their productivity.” J. Constr. Eng. Manage.JCEMD4, 135(3), 217–226.
Dai, J., Goodrum, P. M., Maloney, W. F., and Srinivasan, C. (2009b). “Latent structures of the factors affecting construction labor productivity.” J. Constr. Eng. Manage.JCEMD4, 135(5), 397–406.
Grau, D., Caldas, C. H., Haas, C. T., Goodrum, P. M., and Gong, J. (2009). “Assessing the impact of materials tracking technologies on construction craft productivity.” Automation Constr.AUCOES, 18(7), 903–911.
Hopp, W. J., and Spearman, M. L. (2008). Factory physics, McGraw-Hill, New York.
Howell, G. (1999). “What is lean construction?” Proc., 7th Annual Conf. of the Int. Group for Lean Construction, Univ. of California, Berkeley, CA.
Howell, G. A., and Ballard, G. (1994). “Implementing lean construction: Reducing inflow variability.” Proc., 2nd Annual Conf. of the Int. Group for Lean Construction, IGLC, Santiago, Chile.
Howell, G. A., Ballard, G., and Hall, J. (2001). “Capacity utilization and wait time: A primer for construction.” Proc., 9th Annual Conf. of the Int. Group for Lean Construction, IGLC, Singapore.
Howell, G. A., Ballard, G., Tommelein, I. D., and Koskela, L. (2004). “Discussion of ‘Reducing variability to improve performance as a lean construction principle’.” J. Constr. Eng. Manage.JCEMD4, 130(2), 299–304.
Kimpland, S. L. (2009). “2009 contractor productivity survey results.” FMI Corporation, Raleigh, NC.
Koskela, L. (2000). “An exploration towards a production theory and its application to construction.” Ph.D. thesis, Helsinki Univ. of Technology, Espoo, Finland.
Liberda, M., Ruwanpura, J., and Jergeas, G. (2003). “Construction productivity improvement: A study of human, management and external issues.” Proc., Constr. Research Congress, ASCE, Reston, VA.
Liu, M., and Ballard, G. (2008). “Improving labor productivity through production control.” Proc., 16th Annual Conf. of the Int. Group for Lean Construction, IGLC, Manchester, UK.
Martinez, J. C. (1996). “STROBOSCOPE: State and resource based simulation of construction processes.” Ph.D. thesis, Univ. of Michigan, Ann Arbor, MI.
Meredith, J. (1998). “Building operations management theory through case and field research.” J. Oper. Manage.JOTMES, 16(4), 441–454.
Radosavljevic, M., and Horner, R. M. W. (2002). “The evidence of complex variability in construction labour productivity.” Constr. Manage. Econ.CMECF3, 20(1), 3–12.
Rilett, L. R. (1998). “Identifying component variability of end product specification tests.” J. Constr. Eng. Manage.JCEMD4, 124(2), 133–138.
Rivas, R. A., Borcherding, J. D., González, V., and Alarcón, L. F. (2011). “Analysis of factors influencing productivity using craftsmen questionnaires: Case study in a Chilean construction company.” J. Constr. Eng. Manage.JCEMD4, 137(4), 312–320.
Rojas, E. M., and Aramvareekul, P. (2003). “Labor productivity drivers and opportunities in the construction industry.” J. Manage. Eng.JMENEA, 19(2), 78–82.
Sacks, R., Eastman, C. M., and Lee, G. (2004). “Process model perspectives on management and engineering procedures in the precast/prestressed concrete industry.” J. Constr. Eng. Manage.JCEMD4, 130(2), 206–215.
Thomas, H. R., Horman, M. J., Lemes de Souza, U. E., and Zavrski, I. (2002). “Reducing variability to improve performance as a lean construction principle.” J. Constr. Eng. Manage.JCEMD4, 128(2), 144–154.
Tommelein, I. D., Riley, D. R., and Howell, G. A. (1999). “Parade game: Impact of work flow variability on trade performance.” J. Constr. Eng. Manage.JCEMD4, 125(5), 304–310.
Wambeke, B., Liu, M., and Hsiang, S. M. (2010). “Causes of variation in construction task starting times and duration.” Proc., Constr. Research Congress, ASCE, Reston, VA.
Information & Authors
Information
Published In
Copyright
© 2012. American Society of Civil Engineers.
History
Received: Jan 5, 2011
Accepted: Aug 22, 2011
Published online: Aug 24, 2011
Published in print: Jun 1, 2012
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.