Use of Safety and Lean Integrated Kaizen to Improve Performance in Modular Homebuilding
Publication: Journal of Construction Engineering and Management
Volume 137, Issue 7
Abstract
The two biggest challenges in the construction industry, low productivity and high injury rates, may be addressed simultaneously through the combination of lean production strategies and traditional safety-analysis tools. This case study used Safety and Lean Integrated Kaizen (SLIK) in a modular housing manufacturing facility by applying one lean production tool, kaizen, and a safety-analysis tool, job safety analysis (JSA). The research team used SLIK with the base-framing crew, and the method consisted of analyzing the current process, determining and implementing process improvements, and analyzing the improved process. The changes resulted in a 16% increase in value-added activities and increased the framing crew’s overall output by 55%. By making quick, low-cost changes that were intended to improve productivity to the station layout and work design, safety and ergonomic hazards, including reduced trip hazards, pinch points, and back strain, were also reduced or eliminated. These results support the hypothesis that productivity and safety can be improved simultaneously through combined lean and safety tools.
Get full access to this article
View all available purchase options and get full access to this article.
References
Aft, L. S. (2000). Work measurement and methods improvement, Wiley, New York.
Ahmed, S. M., Kwan, J. C., Ming, F. Y. W., and Ho, D. C. P. (2000). “Site safety management in Hong Kong.” J. Manage. Eng., 16(6), 34–42.
Bureau of Labor Statistics. (2009). “Incidence rate and number of nonfatal occupational injuries by industry and ownership, 2008.” 〈http://www.bls.gov/iif/oshwc/osh/os/ostb2063.pdf〉.
Carlson, D., ed. (1991). Automated builder: Dictionary/encyclopedia of industrialized housing, Automated Builder Magazine, Carpinteria, CA.
Diekmann, J. E., Krewedl, M., Balonick, J., Stewart, T., and Won, S. (2004). “Application of lean manufacturing principles to construction.” CII Rep. No.191, Univ. of Colorado at Boulder.
Friend, M. A., and Kohn, J. P. (2007). Fundamentals of occupational safety and health, Scarecrow Press, Lanham, MD.
Frijters, A. C. P., and Swuste, P. H. J. J. (2008). “Safety assessment in design and preparation phase.” Saf. Sci., 46(2), 272–281.
Gambatese, J. A., Behm, M., and Hinze, J. W. (2005). “Viability of designing for construction worker safety.” J. Constr. Eng. Manage., 131(9), 1029–1036.
Gambatese, J. A., Behm, M., and Rajendran, S. (2008). “Design’s role in construction accident causality and prevention: Perspectives from an expert panel.” Saf. Sci., 46(4), 675–691.
Höök, M., and Stehn, L. (2008). “Applicability of lean principles and practices in industrialized housing production.” Constr. Manage. Econ, 26(10), 1091–1100.
Ikuma, L., and Nahmens, I. (2010). “SLIK operations.” Ind. Eng., 42(10), 26–31.
Koskela, L., and Howell, G. (2002). “The theory of project management: Explanation to novel methods.” Proc. IGLC-10, Gramado, Brazil, 1–11.
Landsbergis, A. P., Cahill, J., and Schnall, P. (1999). “The impact of lean production and related new systems of work organization on worker health.” J. Occup. Health Psych., 4(2), 108–130.
Lee, K. S. (2005). “Ergonomics in total quality management: How can we sell ergonomics to management?” Ergonomics, 48(5), 547–558.
Maudgalya, T., Genaidy, A., and Shell, R. (2008). “Productivity–Quality–Costs–Safety: A sustained approach to competitive advantage–A systematic review of the National Safety Council’s case studies in safety and productivity.” Hum. Factors Ergon. Manuf. Serv. Ind., 18(2), 152–179.
Nahmens, I., and Ikuma, L. H. (2009). “An empirical examination of the relationship between lean construction and safety in the industrial housing industry.” Lean Constr. J., 1–12.
Nahmens, I., and Mullens, M. (2009). “The impact of product choice on lean homebuilding.” Constr. Innov., 9(1), 84–100.
Ohno, T. (1988). Toyota production system, Productivity Press, Adingdon, UK.
Rozenfeld, O., Sacks, R., Rosenfeld, Y., and Baum, H. (2010). “Construction job safety analysis.” Saf. Sci., 48(4), 491–498.
Salem, O. M., Solomon, J., Genaidy, A., and Minkarah, I. (2006). “Lean construction: From theory to implementation.” J. Manage. Eng., 22(4), 168–175.
Saurin, T. A., and Ferreira, C. F. (2009). “The impacts of lean production on working conditions: A case study of a harvester assembly line in Brazil.” Int. J. Ind. Ergon., 39(2), 403–412.
Seo, J. W., and Choi, H. H. (2008). “Risk-based safety impact assessment methodology for underground construction projects in Korea.” J. Constr. Eng. Manage., 134(1), 72–81.
Tommelein, I., Riley, D., and Howell, G. (1999). Parade game: Work flow variability on trade performance.” J. Constr. Eng. Manage., 125(5), 304–310.
Thomas, H. R., Horman, M. J., Minchin, R. E., and Chen, D. (2003). “Improving labor flow reliability for better productivity as lean construction principle.” J. Constr. Eng. Manage., 129(3), 251–262.
Thomassen, M. A., Sander, D., Barnes, K. A., and Nielsen, A. (2003). “Experience and results from implementing lean construction in a large Danish contracting firm.” Proc., 11th Annual Conf. on Lean Construction, Blacksburg, VA, 644–655.
Weinstein, M., Gambatese, J. A., and Hecker, S. (2005). “Can design improve construction safety? Assessing the impact of collaborative safety-in-design process.” J. Constr. Eng. Manage., 131(10), 1125–1134.
Womack, J. P., and Jones, D. T. (1996). Lean thinking: Banish waste and create wealth in your corporation, Simon & Schuster, New York.
Womack, S. K., Armstrong, T. J., and Liker, J. K. (2009). “Lean job design and musculoskeletal disorder risk: A two plant comparison.” Hum. Factors Ergon. Manuf. Serv. Ind., 19(4), 279–293.
Wong, Y. C., Wong, K. Y., and Ali, A. (2009). “Study on lean manufacturing implementation in the Malaysian electrical and electronics industry.” Eur. J. Sci. Res., 38(4), 521–535.
Information & Authors
Information
Published In
Copyright
© 2011 American Society of Civil Engineers.
History
Received: Jun 25, 2010
Accepted: Nov 8, 2010
Published online: Dec 6, 2010
Published in print: Jul 1, 2011
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.