Field Experiments to Evaluate and Control Light Tower Glare in Nighttime Work Zones
Publication: Journal of Construction Engineering and Management
Volume 135, Issue 9
Abstract
An increasing volume of highway repair and construction work is being performed during the off-peak nighttime hours to mitigate the impact of construction-related daytime traffic congestions and shorten the duration of construction operations. The utilization and placement of light towers to illuminate the work zone in this type of construction can cause harmful levels of glare for both drivers and construction workers. This paper presents the results of field experiments which were conducted to (1) study the levels of glare and lighting performance generated by light towers in and around nighttime work zones; (2) analyze the combined impact of the light tower set up parameters including its height as well as its aiming and rotation angles on glare and lighting performance; and (3) provide practical recommendations to reduce and control lighting glare in and around nighttime work zones. The results of these experiments confirm that the set up of light towers has a significant impact on glare and therefore it should be carefully designed and executed on nighttime highway construction projects to ensure the safety of the traveling public as well as construction workers.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The writers gratefully acknowledge the financial support provided for this research project by the ICT under Grant No. UNSPECIFIEDICT R27-2 and the Qatar National Research Fund under Award No. UNSPECIFIEDQNRF-NPRP26-6-7-2. Any opinions, findings, and conclusions or recommendations expressed in this publication are those of the writers and do not necessarily reflect the views of the ICT or the Qatar National Research Fund.
References
American National Standard Institute. (1973). “Practice for industrial lighting.” American National Standard A.11.1.
Amos, S. (1994). “Development of guidelines for systematic planning, design, operation, and maintenance of nighttime linear construction illumination systems.” Ph.D. dissertation, Univ. of Florida, Gainesville, Fla.
Australian Government Publishing Service. (1979). Occupational safety and health in commonwealth government employment: Code of practice 204 exterior lighting of workplaces, Canberra, Australia.
Bryden, J., and Mace, D. (2002). “Guidelines for design and operation of nighttime traffic control for highway maintenance and construction.” NCHRP Rep. No. 476, National Cooperative Highway Research Program, Transportation Research Board, National Research Council, Washington, D.C.
California DOT. (2001). “Construction night work guide.” Guide to the resident engineer and contractor to the minimum required safety devices for a night operation.
CIE Technical Committee TC-4.5. (1986). “Guide to the lighting of exterior working areas.” Rep. No. 68, International Commission on Illumination, Vienna, Austria.
Cottrell, B. H. (1999). “Improving night work zone traffic control.” Final Rep. Prepared for Virginia Transportation Research Council, Virginia Dept. of Transportation and the Univ. of Virginia, Charlottesville, Va.
El-Rayes, K., and Hyari, K. (2005a). “CONLIGHT: Lighting design model for nighttime highway construction.” J. Constr. Eng. Manage., 131(4), 467–477.
El-Rayes, K., and Hyari, K. (2005b). “Optimal lighting arrangements for nighttime highway construction projects.” J. Constr. Eng. Manage., 131(12), 1292–1300.
El-Rayes, K., Liu, L., Pena-Mora, F., Boukamp, F., Odeh, I., Elseifi, M., and Hassan, M. (2007). “Nighttime construction: Evaluation of lighting glare for highway construction in Illinois.” Technical Rep. No. ICT R27-2, Illinois Center for Transportation, Illinois Dept. of Transportation, Ill.
El-Rayes, K., Liu, L., Soibelman, L., and Hyari, K. (2003). “Nighttime construction: Evaluation of lighting for highway construction operations in Illinois.” Technical Rep. No. ITRC FR 00/01-2, Illinois Transportation Research Center, Illinois Dept. of Transportation, Edwardsville, Ill.
Ellis, R. D., Jr., and Amos, S. J. (1996). “Development of work zone lighting standards for nighttime highway work.” Transportation Research Record. 1529, Transportation Research Board, Washington, D.C.
Ellis, R. D., Jr., Herbsman, Z., Kumar, A., and Amos, S. J. (2003). “Illumination guidelines for nighttime highway work.” NCHRP Rep. No. 498, National Cooperative Highway Research Program, Transportation Research Board, Washington, D.C.
Greenquist, J. (2001). “Lighting the way to job-site safety.” Grading and excavation contractor, ⟨http://www.forester.net/gx_0105_lighting.html⟩.
Hancher, D., and Taylor, T. (2001). “Night-time construction issues.” Proc., 80th Annual Meeting of the Transportation Research Board.
Hutchings, J. F. (1998). OSHA quick guide for residential builders and contractors, MacGraw-Hill, New York.
Hyari, K. (2004). “Optimizing lighting conditions for nighttime highway construction operations.” Ph.D. dissertation, Univ. of Illinois, Urbana-Champaign, Ill.
Hyari, K., and El-Rayes, K. (2006a). “Field experiments to evaluate lighting performance in nighttime construction.” Constr. Manage. Econom., 24, 591–601.
Hyari, K., and El-Rayes, K. (2006b). “Lighting requirements for nighttime highway construction.” J. Constr. Eng. Manage., 132(5), 435–443.
Illuminating Engineering Society of North America (IESNA). (2004). “Practice for roadway lighting.” American National Standard/Illuminating Engineering Society of North America ANSI/IESNA RP-8-00.
Michigan DOT. (1999). “Special provision for lighting for night work and night paving.” Rep. Prepared for Dept. of Transportation, Mich.
MUTCD. (2000). Manual on uniform traffic control devices, U.S. Dept. of Transportation, Federal Highway Administration.
New York State DOT. (1995). “Lighting for nighttime operations-special specifications.” Engineering instruction 95-005.
North Carolina DOT. (1995). “Portable construction lighting.” Standard specifications, for roads and structures, Section 1412.
Oregon DOT. (2003). “Traffic lighting design manual.” Oregon Dept. of Transportation, ⟨http://www.odot.state.or.us/traffic/PDF/Illumination/TrafficLightingDesignManual%20⟩ (Jan. 2003).
Shepard, F. D., and Cottrel, B. (1985). “Benefits and safety impact of night work-zone activities.” Rep. No. FHWA/RD-85/067, U.S. Dept. of Transportation, Federal Highway Administration.
Traister, J. E. (1982). Practical lighting application for building construction, Van Nostrand Reinhold, New York.
Information & Authors
Information
Published In
Copyright
© 2009 ASCE.
History
Received: May 14, 2008
Accepted: Feb 5, 2009
Published online: Apr 30, 2009
Published in print: Sep 2009
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.