Experimental Study and Numerical Simulation of Damage Mechanism of RC Box Girder under Internal Blast Loads
Publication: Journal of Performance of Constructed Facilities
Volume 36, Issue 1
Abstract
To obtain the failure mode and damage mechanism of a RC box girder under internal blast loads, the dynamic response process of the RC box girder under internal blast loads was carried out in an experiment and numerical simulation. The results show that after the blast, the failure morphology of the numerical simulation was in good agreement with that of the experiment. The front-face surface of the top slab was damaged by a compressive wave, and the back-face surface was damaged by a tensile wave. There were obvious transverse cracks at the joint between the web and the top slab (bottom slab), and there were many vertical cracks in the web. A large area of penetrating damage occurred in the center of the bottom slab.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
References
Baskar, S., and N. Durai. 2015. “Effect of dead, live and blast loads on a suspension bridge.” J. Chem. Pharm. Sci. 8 (4): 942–946.
Brannon, R. M., and S. Leelavanichkul. 2009. “Survey of four damage models for concrete.” Accessed August 1, 2009. https://doi.org/10.2172/993922.
CEB (Euro-International Committee for Concrete). 1993. CEB-FIP model code 1990: Design code. London: Thomas Telford.
Chen, G., Y. Hao, and H. Hao. 2015. “3D meso-scale modelling of concrete material in spall tests.” Mater. Struct. 48 (6): 1887–1899. https://doi.org/10.1617/s11527-014-0281-z.
Hajek, R., J. Fladr, J. Pachman, J. Stoller, and M. Foglar. 2019. “An experimental evaluation of the blast resistance of heterogeneous concrete-based composite bridge decks.” Eng. Struct. 179 (Jan): 204–210. https://doi.org/10.1016/j.engstruct.2018.10.070.
Hallquist, J. O. 2006. LS-DYNA theory manual. Livermore, CA: Livermore Software Technology.
Hallquist, J. O. 2007. LS-DYNA keyword user’s manual. Version 971. Livermore, CA: Livermore Software Technology.
Holmquist, T. J., and G. R. Johnson. 2011. “A computational constitutive model for concrete subjected to large strains, high strain rates, and high pressures.” J. Appl. Mech. 78 (5): 051003. https://doi.org/10.1115/1.4004326.
Ibrahim, A., and H. Salim. 2012. “Strengthening of concrete box girder bridges under close-in detonations.” J. Civ. Eng. Archit. 6 (6): 699–706.
Ibrahim, A., and H. Salim. 2013. “Finite-element analysis of reinforced-concrete box girder bridges under close-in detonations.” J. Perform. Constr. Facil. 27 (6): 774–784. https://doi.org/10.1061/(ASCE)CF.1943-5509.0000360.
Kong, X., X. Qi, Y. Gu, I. A. Lawan, and Y. Qu. 2018. “Numerical evaluation of blast resistance of RC slab strengthened with AFRP.” Constr. Build. Mater. 178 (178): 244–253. https://doi.org/10.1016/j.conbuildmat.2018.05.081.
Lee, K., B. Andrawes, J. Lim, H. Kim, and Y. Kang. 2019. “A study on overturning failure of horizontally curved single steel box girders.” Eng. Fail. Anal. 97 (Mar): 20–31. https://doi.org/10.1016/j.engfailanal.2018.12.004.
Li, J., and H. Hao. 2014. “Numerical study of concrete spall damage to blast loads.” Int. J. Impact Eng. 68 (Jun): 41–55. https://doi.org/10.1016/j.ijimpeng.2014.02.001.
Liu, X., C. Yu, W. Quan, and L. Chen. 2019. “Inspection, materials testing and field testing of a prestressed concrete box bridge after fire exposure.” Fire Saf. J. 108 (Sep): 102852. https://doi.org/10.1016/j.firesaf.2019.102852.
Maazoun, A., J. Vantomme, and S. Matthys. 2017. “Damage assessment of hollow core reinforced and prestressed concrete slabs subjected to blast loading.” Procedia Eng. 199 (Jan): 2476–2481. https://doi.org/10.1016/j.proeng.2017.09.400.
Mahoney, E. E. 2007. “Analyzing the effects of blast loads on bridges using probability, structural analysis, and performance criteria.” M.Sc. thesis, Faculty of the Graduate School, Univ. of Maryland.
Malvar, E. E. 2000. K&C concrete material model release III—Automated generation of material model input. Glendale, CA: Karagozian and Case Structural Engineers.
Malvar, L. J., and J. E. Crawford. 1998. “Dynamic increase factors for concrete.” In Proc., 28th DDESB seminar. Arlington, VA: US Department of Defense.
Pan, Y., C. E. Ventura, and M. M. Cheung. 2017. “Performance of highway bridges subjected to blast loads.” Eng. Struct. 151 (Nov): 788–801. https://doi.org/10.1016/j.engstruct.2017.08.028.
Schwer, L. E., and Y. D. Murray. 2002. “Continuous surface cap model for geomaterial modeling: A new LS-DYNA material type.” In Proc., 7th Int. LS-DYNA Users Conf., 16–35. Canonsburg, PA: Ansys.
Shi, S., Y. Liao, X. Peng, C. Liang, and J. Sun. 2019. “Behavior of polyurea-woven glass fiber mesh composite reinforced RC slabs under contact explosion.” Int. J. Impact Eng. 132 (Oct): 103335. https://doi.org/10.1016/j.ijimpeng.2019.103335.
Tang, E. K., and H. Hao. 2010a. “Numerical simulation of a cable-stayed bridge response to blast loads, Part II: Damage prediction and FRP strengthening.” Eng. Struct. 32 (10): 3180–3192. https://doi.org/10.1016/j.engstruct.2021.06.006.
Tang, E. K. C., and H. Hao. 2010b. “Numerical simulation of a cable-stayed bridge response to blast loads, Part I: Model development and response calculations.” Eng. Struct. 32 (10): 3180–3192. https://doi.org/10.1016/j.engstruct.2010.06.007.
Wang, W., D. Zhang, F. Lu, S.-C. Wang, and F. Tang. 2013. “Experimental study and numerical simulation of the damage mode of a square reinforced concrete slab under close-in explosion.” Eng. Fail. Anal. 27 (Jan): 41–51. https://doi.org/10.1016/j.engfailanal.2012.07.010.
Wu, C., and H. Hao. 2005. “Modeling of simultaneous ground shock and airblast pressure on nearby structures explosions.” Int. J. Impact Eng. 31 (6): 699–717. https://doi.org/10.1016/j.ijimpeng.2004.03.002.
Xu, K., and Y. Lu. 2006. “Numerical simulation study of spallation in reinforced concrete plates subjected to blast loading.” Comput. Struct. 84 (5–6): 431–438. https://doi.org/10.1016/j.compstruc.2005.09.029.
Yan, B., Y. H. Zhou, F. Liu, and Z. G. Jiang. 2015. “Numerical study on damage mechanism of PRC T-beam under close-in blast loading.” Appl. Mech. Mater. 730: 55–64. https://doi.org/10.4028/www.scientific.net/AMM.730.55.
Yao, S., N. Zhao, Z. Jiang, D. Zhang, and F. Lu. 2018. “Dynamic response of steel box girder under internal blast loading.” Adv. Civ. Eng. 2018: 1–12. https://doi.org/10.1155/2018/9676298.
Yaramada, V. R. 2010. “Numerical response of steel reinforced concrete slab subjected to blast and pressure loadings in LS-DYNA.” In Civil and mechanical engineering. Kansas City, MO: Univ. of Missouri Kansas City.
Zhang, C., G. Gholipour, and A. A. Mousavi. 2019. “Nonlinear dynamic behavior of simply-supported RC beams subjected to combined impact-blast loading.” Eng. Struct. 181 (Feb): 124–142. https://doi.org/10.1016/j.engstruct.2018.12.014.
Zhao, C. F., and J. Y. Chen. 2013. “Damage mechanism and mode of square reinforced concrete slab subjected to blast loading.” Theor. Appl. Fract. Mech. 63–64 (Feb): 54–62. https://doi.org/10.1016/j.tafmec.2013.03.006.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Jan 30, 2021
Accepted: Aug 27, 2021
Published online: Oct 18, 2021
Published in print: Feb 1, 2022
Discussion open until: Mar 18, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Lu Gan, Zhouhong Zong, Haimin Qian, Jin Lin, Experimental and numerical study of damage mechanism of steel box girders under external blast loads, Journal of Constructional Steel Research, 10.1016/j.jcsr.2022.107578, 198, (107578), (2022).