Shock Wave Mediation by Closed-Cell Aluminum Foams
Publication: Journal of Performance of Constructed Facilities
Volume 35, Issue 6
Abstract
Closed-cell aluminum foams of density 0.3 to () were exposed to incident shock waves of 10–11 bar () pressure in a shock tube to study the shock-induced stress on the end wall, which was measured using a fast-response polyvinylidene difluoride (PVDF) sensor. The experimental results revealed amplification of the end-wall stress by 2.5 to 4 times compared to pressure exerted on the front surface of the foams. Shock compression of foams is discussed based on the stress history output of the PVDF. The properties of the densified foam samples, the particle and plastic wave speeds in foams, based on theory, are presented. A numerical analysis of loading the foams with shocks was conducted using Abaqus software to complement the experimental results. The numerical prediction of the end-wall stress also suggests stress amplification by a factor of 2.6 to 3.4. The information can be useful to designers of shock attenuators and defense shields using aluminum foams.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
This research was funded by the Directorate of Extramural Research & Intellectual Property Rights, Defence Research & Development Organisation, India, under Grant RD/0117-DRDO000-002.
References
Ashby, M. F., A. G. Evans, N. A. Fleck, L. J. Gibson, J. W. Hutchinson, and H. N. G. Wadley. 2000. Metal foams: A design guide, 150–170. Boston: Butterworth-Heinemann.
Britan, A., G. Ben-Dor, T. Elperin, O. Igra, and J. P. Jiang. 1997. “Gas filtration during the impact of weak shock waves on granular layers.” Int. J. Multiphase Flow 23 (3): 473–491. https://doi.org/10.1016/S0301-9322(96)00088-2.
Deshpande, V. S., and N. A. Fleck. 2000. “Isotropic constitutive models for metallic foams.” J. Mech. Phys. Solids 48 (6–7): 1253–1283. https://doi.org/10.1016/S0022-5096(99)00082-4.
Dey, C., M. Thorat, S. N. Sahu, K. Akella, and A. A. Gokhale. 2020. “Evaluation of optimum foam density for effective design of blast absorbers.” Mech. Adv. Mater. Struct. 1–8. https://doi.org/10.1080/15376494.2020.1772416.
Goel, M. D., P. Altenhofer, V. A. Matsagar, A. K. Gupta, C. Mundt, and S. Marburg. 2015. “Interaction of a shock wave with a closed cell aluminum metal foam.” Combust. Explos. Shock Waves 51 (3): 373–380. https://doi.org/10.1134/S0010508215030144.
Goel, M. D., V. A. Matsagar, S. Marburg, and A. K. Gupta. 2013. “Comparative performance of stiffened sandwich foam panels under impulsive loading.” J. Perform. Constr. Facil. 27 (5): 540–549. https://doi.org/10.1061/(ASCE)CF.1943-5509.0000340.
Li, Y., X. Ren, X. Zhang, Y. Chen, T. Zhao, and D. Fang. 2021. “Deformation and failure modes of aluminum foam-cored sandwich plates under air-blast loading.” Compos. Struct. 258 (Feb): 113317. https://doi.org/10.1016/j.compstruct.2020.113317.
Mazor, G., G. Ben-Dor, O. Igra, and S. Sorek. 1994. “Shock wave interaction with cellular materials, part 1: Analytical investigation and governing equations.” Shock Waves 3 (3): 159–165. https://doi.org/10.1007/BF01414710.
Petel, O. E., S. Ouellet, A. J. Higgins, and D. L. Frost. 2013. “The elastic-plastic behaviour of foam under shock loading.” Shock Waves 23 (1): 55–67. https://doi.org/10.1007/s00193-012-0414-7.
Shen, J., G. Lu, L. Zhao, and Z. Qu. 2011. “Response of curved sandwich panels subjected to blast loading.” J. Perform. Constr. Facil. 25 (5): 382–393. https://doi.org/10.1061/(ASCE)CF.1943-5509.0000234.
Thorat, M., S. Sahu, V. Menezes, A. Gokhale, and H. Hosano. 2020. “Shock loading of closed cell aluminum foams in the presence of an air cavity.” Appl. Sci. 10 (12): 4128. https://doi.org/10.3390/app10124128.
Wang, E., Q. Li, and G. Sun. 2020. “Computational analysis and optimization of sandwich panels with homogeneous and graded foam cores for blast resistance.” Thin-Walled Struct. 147 (Feb): 106494. https://doi.org/10.1016/j.tws.2019.106494.
Yang, B., Z. Cao, Z. Chang, and G. Zheng. 2021. “The effect of the reflected shock wave on the foam material.” Int. J. Impact Eng. 149 (Mar): 103773. https://doi.org/10.1016/j.ijimpeng.2020.103773.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Mar 9, 2021
Accepted: Aug 25, 2021
Published online: Sep 25, 2021
Published in print: Dec 1, 2021
Discussion open until: Feb 25, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Shengpu Zhao, Xiaotian Zhang, Ruiqing Wang, Ruizhi Li, Stress-strain states and energy absorption in open-cell aluminium foams under hypervelocity impact, Composite Structures, 10.1016/j.compstruct.2023.116885, (116885), (2023).
- Mahesh Thorat, Shiba N. Sahu, Viren Menezes, Amol A. Gokhale, Back-Face-Signature-Monitored Evaluation of Foam-Sandwich Structures as Shock Mitigating Materials, Journal of Materials Engineering and Performance, 10.1007/s11665-022-06906-1, 31, 11, (8731-8739), (2022).