Assessment of Reinforced Concrete Slab Response to Contact Explosion Effects
Publication: Journal of Performance of Constructed Facilities
Volume 34, Issue 4
Abstract
This paper presents the results of an experimental investigation on the response of plain concrete (PC) and reinforced concrete (RC) slabs subjected to contact explosion effects of 500-g TNT. A finite element model was developed and validated with the experimental results. Parametric studies of the response of RC slabs to contact explosion effects were conducted using the validated numerical model. The influence of explosive mass, slab thickness, concrete strength, reinforcement ratio, and reinforcement spacing were investigated in the parametric studies. Concrete compressive strength was found to have little influence on the threshold breach charge mass when compared to the effects of reinforcement ratio. An empirical equation was proposed based on the numerical results for predicting the threshold breach charge mass that incorporates the effect of the reinforcement ratio.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
The LS-DYNA models, generated plots for parametric studies, and experimental results presented in the article are available from the corresponding author by request.
References
Akers, S., R. Weed, D. Rickman, and K. Danielson. 2005. Numerical simulations of explosive wall breaching. Denver: Computer Society.
Beppu, M., T. Ohno, T. Ohkubo, B. Li, and K. Satoh. 2010. “Contact explosion resistance of concrete plates externally strengthened with FRP laminates.” Int. J. Protective Struct. 1 (2): 257–270. https://doi.org/10.1260/2041-4196.1.2.257.
Bessette, G., R. Bell, R. Cole, C. Vaughan, L. Yarrington, and S. Attaway. 2003. Zapotek: A coupled Eulerian-Lagrangian computer code, methodology and user manual, version 1.0. Albuquerque, NM: Scandia National Laboratories Retrieved.
DOA (Dept. of Army). 2007. Explosives and demolitions. FM 3-34.214. Washington, DC: DOA.
Dua, A., A. Braimah, and M. Kumar. 2019a. “Contact explosion response of RC columns: Experimental and numerical investigation.” In Proc., Institution of Civil Engineers: Structures and Buildings, 1–22. London: Institution of Civil Engineers. https://doi.org/10.1680/jstbu.18.00223.
Dua, A., A. Braimah, and M. Kumar. 2019b. “Experimental and numerical investigation of rectangular reinforced concrete columns under contact explosion effects.” J. Eng. Struct. 205 (Jan): 109891. https://doi.org/10.1016/j.engstruct.2019.109891.
Gebbeken, N., S. Greulich, A. Pietzsch, and M. Landmann. 2004. “The engineering-tool XPLOSIM to determine the effects of explosive loadings on reinforced and fibre reinforced concrete structures.” In Proc., 18th Int. Symp. for Military Aspects of Blast and Shock. Spiez, Switzerland: Spiez Laboratory. http://mabs.ch/data/documents/18-24.pdf.
Krivtsun, V. I., and I. E. Mentus. 2009. Determination of the basic characteristics of contact charges for breaching walls. [In Ukrainian.] 8–10. Kiev, Ukraine: Annual Publications of the Taras Shevchenko National Univ. of Kiev.
Lees, F. P. 1996. Vol. 2 of Loss prevention in the process industry. Oxford, UK: Butterworth Heinemann.
Li, J., C. Wu, and H. Hao. 2016. “Spallation of reinforced concrete slabs under contact explosion.” In Proc., 2nd Asian Conf. on Defence Technology (ACDT). New York: IEEE. https://ieeexplore.ieee.org/document/7437641/.
Lönnqvist, L. 1993. “The effects of high explosives in contact with reinforced concrete slabs.” In Proc., 6th Int. Symp. on Interaction of Nonnuclear Munitions with Structures. Toronto: Wright Laboratories. https://catalog.hathitrust.org/Record/009615690.
Marchand, K. A., and B. T. Plenge. 1998. Concrete hard target spall and breach model. Eglin Air Force Base, FL: Air Force Research Laboratory.
Morishita, M., H. Tanaka, M. Ito, and H. Yamaguchi. 2000. “Damage of reinforced concrete slabs subjected to contact detonations.” [In Japanese.] J. Struct. Eng. 46A: 1787–1797.
Murray, Y. D. 2007. User’s manual for LS-DYNA concrete material model 159. Washington, DC: Federal Highway Administration.
Puryear, J. M. H., D. J. Stevens, K. A. Marchand, E. B. Williamson, E. L. Sammarco, and C. K. Crane. 2012. “Predicting spall and breach for blast-loaded reinforced-concrete columns.” In Proc., Texas ASCE Centennial Conf. Reston, VA: ASCE.
Remennikov, A., I. Mentus, and B. Uy. 2015. “Explosive breaching of walls with contact charges: Theory and applications.” Int. J. Protective Struct. 6 (4): 629–647. https://doi.org/10.1260/2041-4196.6.4.629.
Rigby, S. E., A. Tyas, S. D. Clarke, S. D. Fay, J. A. Warren, I. Elgy, and M. Gant. 2014. “Testing apparatus for the spatial and temporal pressure measurements from near-field free air explosions.” In Proc., 6th Int. Conf. on Protection of Structures Against Hazards. Thousand Oaks, CA: Sage. http://eprints.whiterose.ac.uk/81238/1/Rigby%20et%20al.%20-%202014%20-%20Testing%20Apparatus%20for%20the%20Spatial%20and%20Temporal%20Pressure%20Measurements%20from%20Near-Field%20Free%20Air%20Explosions.pdf.
Salamakhin, T. M. 1974. Fundamental of mechanical effects of explosion on structures and methods of predicting blast loads. [In Russian.] Moscow: Military Engineering Academy Publications.
Trajkovski, J., R. Kunc, J. Perenda, and I. Prebil. 2014. “Minimum mesh design criteria for blast wave development and structural response: MMALE method.” Latin Am. J. Solids Struct. 11 (11): 1999–2017. https://doi.org/10.1590/S1679-78252014001100006.
Wang, F., Y. K. M. Wan, O. Y. K. Chong, C. H. Lim, and E. T. M Lim. 2008. “Reinforced concrete slab subjected to close-in explosion.” In Proc., 7th German LS-DYNA Forum. Stuttgart, Germany: DYNAmore GmbH. https://www.dynamore.de/de/download/papers/forum08/dokumente/J-I-03.pdf.
Weerheijm, J., W. Karthaus, and G. Opschoor. 1984. “The failure mode of layered concrete construction due to contact charges.” In Proc., 21st Dept. of Defense Explosive Safety Seminar. Alexandria, VA: Explosives Safety Board. https://apps.dtic.mil/dtic/tr/fulltext/u2/a152062.pdf.
Yuan, L., S. Gong, and W. Jin. 2008. “Spallation mechanism of RC slabs under contact explosion.” Trans. Tianjin Univ. 14 (6): 464. https://doi.org/10.1007/s12209-008-0079-6.
Information & Authors
Information
Published In
Copyright
©2020 American Society of Civil Engineers.
History
Received: Jul 18, 2019
Accepted: Feb 6, 2020
Published online: May 8, 2020
Published in print: Aug 1, 2020
Discussion open until: Oct 8, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.