Seismic Fragility Evaluation of SCCB-Enhanced RC Frame Structures
Publication: Journal of Performance of Constructed Facilities
Volume 34, Issue 4
Abstract
A novel self-centering cable brace (SCCB) with friction devices was developed to improve the seismic performance of existing frame structures. To investigate the enhancing effect of the SCCB on reinforced concrete (RC) frame structures, seismic fragility evaluation of SCCB-enhanced RC frame structures was conducted based on the incremental dynamic analysis (IDA), through which probabilities of exceedance at various performance limit states are calculated. The proposed evaluation procedure was applied to a seismically deficient six-story RC frame, where buckling-restrained braces (BRBs) and SCCBs with similar damping properties were used and compared for strengthening effects. According to the IDA results, the seismic fragility curves of the two strengthening schemes were obtained. Compared with the BRB-enhanced frame, the SCCB-enhanced frame exhibits significantly better seismic capability under rare earthquakes. In addition, lower probability of exceedance is observed in the SCCB-enhanced frame under the repair available state, indicating that the SCCB-enhanced RC frame is more seismic resilient than the BRB-enhanced frame.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
The test data in Fig. 4 are available from the corresponding author by request.
Acknowledgments
The authors would like to thank the support from the Ministry of Science and Technology of the People’s Republic of China under Grant No. 2018YFE0206100, the National Natural Science Foundation of China under Grant No. 51508251, the Program of the Six Major Talent Summit Foundation Grant No. JZ-062, and the Jinling Institute of Technology High-Level Personnel Work Activation Fee to Fund Projects Grant No. jit-b-201614.
References
ATC (Applied Technology Council). 2009. Guidelines for seismic performance assessment of buildings. Rep ATC-58. Redwood City, CA: ATC.
Basili, M., and M. D. Angelis. 2007. “A reduced order model for optimal design of 2-mdof adjacent structures connected by hysteretic dampers.” J. Sound Vib. 306 (1): 297–317. https://doi.org/10.1016/j.jsv.2007.05.012.
Bing, L., R. Park, and H. Tanaka. 2001. “Stress-strain behaviour of high strength concrete confined by ultra high and normal strength transverse reinforcements.” ACI Struct. J. 98 (3): 395–406.
Chi, P., T. Guo, Y. Peng, D. Cao, and J. Dong. 2018. “Development of a self-centering tension-only brace for seismic protection of frame structures.” Steel Compos. Struct. 26 (5): 573–582. https://doi.org/10.12989/scs.2018.26.5.573.
Chou, C., and P. Chung. 2014. “Development of cross-anchored dual-core self-centering braces for seismic resistance.” J. Constr. Steel Res. 101 (Oct): 19–32. https://doi.org/10.1016/j.jcsr.2014.04.035.
Chou, C., P. Chung, and Y. Cheng. 2016a. “Experimental evaluation of large-scale dual-core self-centering braces and sandwiched buckling-restrained braces.” Eng. Struct. 116 (Jun): 12–25. https://doi.org/10.1016/j.engstruct.2016.02.030.
Chou, C., W. Tsai, and P. Chung. 2016b. “Development and validation tests of a dual-core self-centering sandwiched buckling-restrained brace (SC-SBRB) for seismic resistance.” Eng. Struct. 121 (Aug): 30–41. https://doi.org/10.1016/j.engstruct.2016.04.015.
Dimitrios, V. 2001. “Incremental dynamic analysis.” Earthquake Eng. Struct. D. 31 (3): 491–514. https://doi.org/10.1002/eqe.141.
Erochko, J., C. Christopoulos, R. Tremblay, and H. Choi. 2010. “Residual drift response of SMRFs and BRB frames in steel buildings designed according to ASCE 7-05.” J. Struct. Eng. 137 (5): 589–599. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000296.
Guerrero, H., T. Ji, J. A. Escobar, and A. Teran-Gilmore. 2018. “Effects of buckling-restrained braces on reinforced concrete precast models subjected to shaking table excitation.” Eng. Struct. 163 (May): 294–310. https://doi.org/10.1016/j.engstruct.2018.02.055.
Guo, T., J. Xu, W. Xu, and Z. Di. 2014. “Seismic upgrade of existing buildings with fluid viscous dampers: Design methodologies and case study.” J. Perform. Constr. Facil. 29 (6): 04014175. https://doi.org/10.1061/(ASCE)CF.1943-5509.0000671.
Jia, M., D. Lu, L. Guo, and L. Sun. 2014. “Experimental research and cyclic behavior of buckling-restrained braced composite frame.” J. Constr. Steel Res. 95 (Apr): 90–105. https://doi.org/10.1016/j.jcsr.2013.11.021.
Kitayama, S., and M. C. Constantinou. 2016. “Probabilistic collapse resistance and residual drift assessment of buildings with fluidic self-centering systems.” Earthquake Eng. Struct. D. 45 (12): 1935–1953. https://doi.org/10.1002/eqe.2733.
Liang, X., and Q. Shi. 2016. Design principle of concrete structure. [In Chinese.] Beijing: China Construction Industry Press.
Lin, W. H., and A. K. Chopra. 2010. “Asymmetric one-storey elastic systems with non-linear viscous and viscoelastic dampers: Earthquake response.” Earthq. Eng. Struct. D. 32 (4): 555–577. https://doi.org/10.1002/eqe.237.
Lu, X., Q. Jiang, Z. Miao, and P. Pan. 2015. Elasto-plastic analysis of buildings against earthquake. [In Chinese.] Beijing: China Construction Industry Press.
Lü, D., and X. Yu. 2013. “Theoretical study of probabilistic seismic risk assessment based on analytical functions of seismic fragility.” [In Chinese.] J. Build. Struct. 34 (10): 41–48.
McCormick, J., H. Aburano, M. Ikenaga, and M. Nakashima. 2008. “Permissible residual deformation levels for building structures considering both safety and human elements.” In Proc., 14th World Conf. on Earthquake Engineering. Beijing: 14WCEE.
MHURD-PRC (Ministry of Housing and Urban-Rural Development of the People’s Republic of China). 2010. Code for seismic design of buildings. [In Chinese.] GB 50011-2010. Beijing: MHURD-PRC.
Wang, F., and Z. Guo. 2018. “A method of seismic performance evaluation based seismic fragility analysis.” In Proc., MATEC Web of Conf., 175. Paris: EDP Sciences.
Wang, J. S. 2019. “Experimental test and anti-seismic performance analysis of self-centering cable with friction energy dissipater.” [In Chinese.] Master thesis, School of Graduate, Southeast Univ.
Information & Authors
Information
Published In
Copyright
©2020 American Society of Civil Engineers.
History
Received: Jul 20, 2019
Accepted: Dec 16, 2019
Published online: Apr 28, 2020
Published in print: Aug 1, 2020
Discussion open until: Sep 28, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.