Numerical Study on the Collapse of the Morandi Bridge
Publication: Journal of Performance of Constructed Facilities
Volume 34, Issue 4
Abstract
An innovative discontinuum-based micromodeling approach, the Applied Element Method, is used in this work to investigate explicitly potential failure mechanisms that might have contributed to the collapse of the Morandi Bridge in Genoa, Italy, which occurred on August 14, 2018. While, consistently with the findings presented in a previous contribution by the same authors, the initial trigger of the collapse mechanism was assumed as the release of one of the stays, this study investigates, through a sensitivity study, the impact that several parameters and epistemic uncertainties, including reduction of cables’ cross section (potentially induced by corrosion) and various possible configurations of both passive and active reinforcements in the main deck, have on the predicted failure mode. Then, to indicate the structural elements and details in which a potential presence of corrosion should be more carefully explored, the observed debris distribution is compared with its numerical counterparts.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
No data, models, or code were generated or used during the study.
Acknowledgments
The authors would like to start by expressing their gratitude to nine anonymous reviewers, whose pertinent and constructive feedback on the initial version of the manuscript helped improving its contents significantly. The authors would also like to acknowledge the assistance and collaboration of the technical support staff from Applied Science International LLC (ASI), on the use of the employed AEM software, Extreme Loading for Structures.
References
Abdelhamid, T. S., and J. G. Everett. 2002. “Identifying root causes of construction accidents.” J. Constr. Eng. Manage. 127 (4): 348–349. https://doi.org/10.1061/(ASCE)0733-9364(2000)126:1(52).
Almasri, A. H., R. Z. Alrousan, and A. H. Manasrah. 2015. “Finite element analysis of a 2-span pedestrian bridge collapse due to trucks collision.” KSCE J. Civ. Eng. 19 (6): 1845–1851. https://doi.org/10.1007/s12205-014-1119-5.
ASI (Applied Science International). 2018. Extreme loading for structures: User manual, version 6.0. Durham, NC: ASI.
Barker, M. G., and J. A. Puckett. 2018. “Unique truck loads on interstates in Wyoming and similar states and the impact on bridge safety design.” J. Bridge Eng. 24 (2): 04018110. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001312.
Bathe, K. J., and H. Saunders. 1984. Finite element procedures in engineering analysis. New York: ASME.
Bellotti, F. 2019. “Seismic analysis of the Morandi Bridge.” M.Eng. dissertation, Dept. of Civil Engineering and Architecture, Univ. of Pavia.
Calvi, G. M., M. Moratti, G. J. O’Reilly, N. Scattarreggia, R. Monteiro, D. Malomo, P. M. Calvi, and R. Pinho. 2019. “Once upon a time in Italy: The tale of the Morandi Bridge.” Struct. Eng. Int. 29 (2): 198–217. https://doi.org/10.1080/10168664.2018.1558033.
Carey, T. J., H. B. Mason, A. R. Barbosa, and M. H. Scott. 2019. “Multihazard earthquake and tsunami effects on soil–foundation–bridge systems.” J. Bridge Eng. 24 (4): 04019004. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001353.
Cook, W., P. J. Barr, and M. W. Halling. 2013. “Bridge failure rate.” J. Perform. Constr. Facil. 29 (3): 04014080. https://doi.org/10.1061/(ASCE)CF.1943-5509.0000571.
Cundall, P. A., and R. D. Hart. 1992. “Numerical modelling of discontinua.” Eng. Comput. 9 (2): 101–113. https://doi.org/10.1108/eb023851.
Deng, L., W. Wang, and Y. Yu. 2016. “State-of-the-art review on the causes and mechanisms of bridge collapse.” J. Perform. Constr. Facil. 30 (2): 04015005. https://doi.org/10.1061/(ASCE)CF.1943-5509.0000731.
Elshaer, A., H. Mostafa, and H. Salem. 2017. “Progressive collapse assessment of multistory reinforced concrete structures subjected to seismic actions.” KSCE J. Civ. Eng. 21 (1): 184–194. https://doi.org/10.1007/s12205-016-0493-6.
Fu, Z., B. Ji, M. Cheng, and H. Maeno. 2012. “Statistical analysis of the causes of bridge collapse in China.” In Proc., 6th Congress on Forensic Engineering, 75–83. Reston, VA: ASCE.
Galvez, F., M. Giaretton, S. Abeling, J. Ingham, and D. Dizhur. 2018. “Discrete element modelling of a two-storey unreinforced masonry scaled model.” In Proc., 16th European Conf. on Earthquake Engineering. Thessaloniki, Greece: European Association for Earthquake Engineering.
Genikomsou, A. S., and M. A. Polak. 2016. “Finite-element analysis of reinforced concrete slabs with punching shear reinforcement.” J. Struct. Eng. 142 (12): 04016129. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001603.
Grunwald, C., A. A. Khalil, B. Schaufelberger, E. M. Ricciardi, C. Pellecchia, E. De Iuliis, and W. Riedel. 2018. “Reliability of collapse simulation—Comparing finite and applied element method at different levels.” Eng. Struct. 176 (Dec): 265–278. https://doi.org/10.1016/j.engstruct.2018.08.068.
Hrynyk, T. D., and F. J. Vecchio. 2017. “Modeling of reinforced and fiber-reinforced concrete slabs under impact loads.” ACI Struct. J. 321: 8.1–8.20.
Jiang, H., J. Wang, M. G. Chorzepa, and J. Zhao. 2017. “Numerical investigation of progressive collapse of a multispan continuous bridge subjected to vessel collision.” J. Bridge Eng. 22 (5): 04017008. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001037.
Kawai, Y., D. Siringoringo, and Y. Fujino. 2014. “Failure analysis of the hanger clamps of the Kutai-Kartanegara Bridge from the fracture mechanics viewpoint.” J. JSCE 2 (1): 1–6. https://doi.org/10.2208/journalofjsce.2.1_1.
Lemos, J. V. 2007. “Discrete element modeling of masonry structures.” Int. J. Archit. Heritage 1 (2): 190–213. https://doi.org/10.1080/15583050601176868.
Li, Z., Y. Chen, and Y. Shi. 2017. “Numerical failure analysis of a continuous reinforced concrete bridge under strong earthquakes using multi-scale models.” Earthquake Eng. Eng. Vibr. 16 (2): 397–413. https://doi.org/10.1007/s11803-017-0389-6.
Maekawa, K., and H. Okamura. 1983. “The deformational behavior and constitutive equation of concrete using elasto-plastic and fracture model.” J. Faculty Eng. 37 (May): 253–328.
Malomo, D., R. Pinho, and A. Penna. 2018. “Using the applied element method for modelling calcium silicate brick masonry subjected to in-plane cyclic loading.” Earthquake Eng. Struct. Dyn. 47 (7): 1610–1630. https://doi.org/10.1002/eqe.3032.
Malomo, D., R. Pinho, and A. Penna. 2019. “Applied element modelling of the dynamic response of a full-scale clay brick masonry building specimen with flexible diaphragms.” Int. J. Archit. Heritage 1–18. https://doi.org/10.1080/15583058.2019.1616004.
Martinez y Cabrera, F., G. Camomilla, M. Donferri Mitelli, and F. Pisani. 1994. “Rehabilitation of stays of the Polcevera Viaduct.” In Proc., Int. Symp. on Cable Stayed Bridges, 640–665. Shanghai, China.
Martinez y Cabrera, F., G. Camomilla, F. Pisani, and A. Marioni. 1993. “Il risanamento degli stralli del viadotto Polcevera.” In Atti delle Giornate AICAP, 581–590. Milan, Italy: Associazione Italiana Calcestruzzo Armato e Precompresso.
McVay, M. C., S. J. Wasman, G. R. Consolazio, P. J. Bullock, D. G. Cowan, and H. T. Bollmann. 2008. “Dynamic soil–structure interaction of bridge substructure subject to vessel impact.” J. Bridge Eng. 14 (1): 7–16. https://doi.org/10.1061/(ASCE)1084-0702(2009)14:1(7).
Meguro, K., and M. Hakuno. 1994. “Application of the extended distinct element method for collapse simulation of a double deck bridge.” J. Struct. Eng. Earthquake Eng. 10 (483): 175–185.
Meguro, K., and H. Tagel-Din. 2000. “Applied element method for structural analysis: Theory and application for linear materials.” Struct. Eng. Earthquake Eng. 17 (1): 21s–35s.
Meguro, K., and H. Tagel-Din. 2001. “Applied element simulation of RC structures under cyclic loading.” J. Struct. Eng. 127 (11): 1295–1305. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:11(1295).
Meguro, K., and H. Tagel-Din. 2002. “Applied element method used for large displacement structural analysis.” J. Nat. Disaster Sci. 24 (1): 25–34.
Menegotto, M., and P. Pinto. 1973. “Method of analysis for cyclically loaded RC plane frames including changes in geometry and non-elastic behavior of elements under combined normal force and bending.” In Proc., IABSE Symp. on Resistance and Ultimate Deformability of Structures Acted on by Well Defined Repeated Loads, 15–22. Zurich, Switzerland. Zurich, Switzerland: International Association for Bridge and Structural Engineering.
Mitropoulos, P., T. S. Abdelhamid, and G. A. Howell. 2005. “Systems model of construction accident causation.” J. Constr. Eng. Manage. 131 (7): 816–825. https://doi.org/10.1061/(ASCE)0733-9364(2005)131:7(816).
Moharrami, M., and I. Koutromanos. 2017. “Finite element analysis of damage and failure of reinforced concrete members under earthquake loading.” Earthquake Eng. Struct. Dyn. 46 (15): 2811–2829. https://doi.org/10.1002/eqe.2932.
Morandi, R. 1967. “Il viadotto sul Polcevera per l’autostrada Genova-Savona.” L’Industria Italiana del Cemento 12: 849–872.
Morandi, R. 1973. “Construcción de puentes de hormigón pretensado, de gran luz, con tirantes homogeneizados.” [In Spanish.] Hormigón y acero (Spanish Asociación Científico-Técnica del Hormigón Estructural) 24 (109): 95–116.
Morandi, R. 1982. Documenti dell’Archivio Morandi. [In Italian.] Rome: Documenti dell’Archivio Morandi, Archivio Centrale di Stato.
Mortellaro, A., G. Ievolella, F. Lombardo, C. Nuti, and I. Vanzi. 2018. Relazione della Commissione Ispettiva Ministeriale crollo Viadotto Polcevera. [In Italian.] Rome: Ministero delle Infrastrutture e dei Trasporti.
Okamura, H., and K. Maekawa. 1991. Nonlinear analysis and constitutive models of reinforced concrete. Tokyo: Giho-do Press.
Orgnoni, A. 2019. “Revisione critica e modellazione della sequenza di costruzione del viadotto sul Polcevera.” [In Italian.] Digital Model. 25: 6–32.
Piran Aghl, P., C. J. Naito, and H. R. Riggs. 2014. “Full-scale experimental study of impact demands resulting from high mass, low velocity debris.” J. Struct. Eng. 140 (5): 04014006. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000948.
Saatci, S., and F. J. Vecchio. 2010. “Nonlinear finite element modeling of reinforced concrete structures under impact loads.” ACI Struct. J. 106 (106): 717–725.
Salem, H., S. Mohssen, K. Kosa, and A. Hosoda. 2014. “Collapse analysis of Utatsu Ohashi Bridge damaged by Tohuku tsunami using applied element method.” J. Adv. Concr. Technol. 12 (10): 388–402. https://doi.org/10.3151/jact.12.388.
Salem, H. M., and H. M. Helmy. 2014. “Numerical investigation of collapse of the Minnesota I-35W Bridge.” Eng. Struct. 59 (Feb): 635–645. https://doi.org/10.1016/j.engstruct.2013.11.022.
Song, W. K., and S. E. Kim. 2007. “Analysis of the overall collapse mechanism of cable-stayed bridges with different cable layouts.” Eng. Struct. 29 (9): 2133–2142. https://doi.org/10.1016/j.engstruct.2006.11.005.
Sun, L., C. Zhou, D. Qin, and L. Fan. 2003. “Application of extended distinct element method with lattice model to collapse analysis of RC bridges.” Earthquake Eng. Struct. Dyn. 32 (8): 1217–1236. https://doi.org/10.1002/eqe.269.
Swenson, D. V., and A. R. Ingraffea. 1991. “The collapse of the Schoharie Creek Bridge: A case study in concrete fracture mechanics.” Int. J. Fract. 51 (1): 73–92. https://doi.org/10.1007/BF00020854.
Tagel-Din, H. 1998. “A new efficient method for nonlinear, large deformation and collapse analysis of structures.” Ph.D. thesis, Institute of Industrial Science, Univ. of Tokyo.
Tagel-Din, H., and K. Meguro. 2000. “Nonlinear simulation of RC structures using applied element method.” Struct. Eng. Earthquake Eng. 17 (2): 137s–147s. https://doi.org/10.2208/jscej.2000.654_13.
Wan, Y., L. Zhu, H. Fang, W. Liu, and Y. Mao. 2019. “Experimental testing and numerical simulations of ship impact on axially loaded reinforced concrete piers.” Int. J. Impact Eng. 125 (Mar): 246–262. https://doi.org/10.1016/j.ijimpeng.2018.11.016.
Wardhana, K., and F. C. Hadipriono. 2003. “Analysis of recent bridge failures in the United States.” J. Perform. Constr. Facil. 17 (3): 144–150. https://doi.org/10.1061/(ASCE)0887-3828(2003)17:3(144).
Zhang, J., H. Peng, and C. S. Cai. 2013. “Destructive testing of a decommissioned reinforced concrete bridge.” J. Bridge Eng. 18 (6): 564–569. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000408.
Information & Authors
Information
Published In
Copyright
©2020 American Society of Civil Engineers.
History
Received: Mar 29, 2019
Accepted: Nov 6, 2019
Published online: Apr 17, 2020
Published in print: Aug 1, 2020
Discussion open until: Sep 17, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.