Performance Assessment of Corroded Reinforced Concrete Structure Considering Bond Deterioration
Publication: Journal of Performance of Constructed Facilities
Volume 34, Issue 2
Abstract
This paper presents an assessment of the lateral load capacity and ductility of a 21-year-old reinforced concrete (RC) structure situated in a marine environment and affected by rebar corrosion. Nonlinear pushover analysis is carried out for the structure by modeling the hinges. The consequence of corrosion is accounted for in the moment rotation characteristics of the hinges by considering the reduction in bond strength, loss of rebar diameter, and reduction in the mechanical properties of steel. The basic bond stress–slip relationship from an internationally established model code is modified to account for corrosion using a bond model. This bond model is used to obtain the hinge properties of the corroded rebar. The simplified beam macromodel developed considering these modified hinge properties due to corrosion is validated with four-point bending tests carried out on beams and similar experiments from the literature. Moreover, a simulation is also carried out using a two-dimensional finite element micromodel of a beam using the modified bond model for the rebar affected by corrosion. The load deflection characteristics of the micro and macromodels are found to agree well for the four-point bending load for different levels of corrosion. The proposed beam model, considering the effect of rebar corrosion, is used for evaluation of performance of the 21-year-old corroded RC structure for the design basis earthquake load. Subsequently, a seismic assessment methodology is proposed for corroded RC structures.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and codes generated or used during the study appear in the published article.
Acknowledgments
The authors gratefully acknowledge the efforts of Mr. M. K. Pradhan and Mr. K. Srinivas of the Civil Engineering Division of the Bhabha Atomic Research Centre for their involvement in extending the facilities required for the construction of specimens required for the experimental work.
References
Almusallam, A. A., A. S. Al-Gahtani, and A. R. Aziz. 1996. “Effect of reinforcement corrosion on bond strength.” Constr. Build. Mater. 10 (2): 123–129. https://doi.org/10.1016/0950-0618(95)00077-1.
ATC (Applied Technology Council). 1996. Seismic evaluation and retrofit of concrete buildings, Vols. 1 and 2. Redwood City, CA: Applied Technology Council.
Auyeung, Y., P. Balaguru, and L. Chung. 2000. “Bond behavior of corroded reinforcement bars.” ACI Struct. J. 97 (2): 214–220.
Balim, Y., and J. C. Reid. 2003. “Reinforcement corrosion and the deflection of RC beams.” Cem. Concr. Compos. 25 (6): 625–632.
Batis, G., and E. Rakanta. 2005. “Corrosion of steel reinforcement due to atmospheric pollution.” Cem. Concr. Compos. 27 (2): 269–275. https://doi.org/10.1016/j.cemconcomp.2004.02.038.
Berto, L., R. Vitaliani, A. Saetta, and P. Simioni. 2009. “Seismic assessment of existing RC structures affected by degradation phenomena.” Struct. Saf. 31 (4): 284–297. https://doi.org/10.1016/j.strusafe.2008.09.006.
BIS (Bureau of Indian Standards). 1993. Ductile detailing of reinforced Concrete structures subjected to seismic forces. IS 13920. New Delhi: BSI.
BIS (Bureau of Indian Standards). 2000. Plain and reinforced concrete—Code of practice. IS 456. New Delhi: BIS.
BIS (Bureau of Indian Standards). 2016. Criteria for earthquake resistant design of structures, Part 1—General provisions and buildings. IS 1893. New Delhi: BIS.
Blomfors, M., K. Zandi, K. Lundgren, and D. Coronelli. 2018. “Engineering bond model for corroded reinforcement.” Eng. Struct. 156 (Feb): 394–410. https://doi.org/10.1016/j.engstruct.2017.11.030.
BS (British Standard). 2013. Concrete: Specification, performance, production and conformity. BS EN 206. London: BS.
Castel, A., R. Franfois, and G. Arliguie. 2000. “Mechanical behavior of corroded reinforced concrete beams—Part 1: Experimental study of corroded beams.” Mater. Struct. 33 (9): 539–544. https://doi.org/10.1007/BF02480533.
CEB/FIP (Euro International Committee Concrete/International Federation for Pre-stressing). 2012. CEB-FIP model code 2010 volume 1. Lausanne, Switzerland: FIB.
Debaiky, A. S., M. F. Green, and B. B. Hope. 2002. “Carbon fiber-reinforced polymer wraps for corrosion control and rehabilitation of reinforced concrete columns.” ACI Mater. J. 99 (2): 129–137.
Du, Y. G., A. H. C. Chan, and L. A. Clark. 2006. “Finite element analysis of the effects of radial expansion of corroded reinforcement.” Comput. Struct. 84 (13–14): 917–929. https://doi.org/10.1016/j.compstruc.2006.02.012.
Dyngeland, T. 1989. “Behavior of reinforced concrete panels.” Ph.D. dissertation, Dept. of Civil Engineering, Norwegian Institute of Technology.
Fernandez, I., J. M. Bairán, and A. R. Marí. 2015. “Corrosion effects on the mechanical properties of reinforcing steel bars: Fatigue and sigma-epsilon behavior.” Constr. Build. Mater. 101 (1): 772–783. https://doi.org/10.1016/j.conbuildmat.2015.10.139.
International Atomic Energy Agency. 2002. Guidebook on non-destructive testing of concrete structures: Training course series no. 17. Vienna, Austria: International Atomic Energy Agency.
Kent, D. C., and R. Park. 1971. “Flexural mechanics with confined concrete” J. Struct. Div. 97 (7): 1969–1990.
Lee, H. S., and Y. S. Cho. 2009. “Evaluation of the mechanical properties of steel reinforcement embedded in concrete specimen as a function of the degree of reinforcement corrosion.” Int. J. Fract. 157 (1): 81–88. https://doi.org/10.1007/s10704-009-9334-7.
Lee, H. S., T. Noguchi, and F. Tomosawa. 1998. “Fundamental study on evaluation of structural performance of reinforced concrete beam damaged by corrosion of longitudinal tensile main rebar by finite element method.” J. Struct. Constr. Eng. Trans. AIJ 63 (506): 43–50. https://doi.org/10.3130/aijs.63.43_2.
Lee, H. S., T. Noguchi, and F. Tomosawa. 2002. “Evaluation of the bond properties between concrete and reinforcement as a function of the degree of reinforcement corrosion.” Cem. Concr. Res. 32 (8) 1313–1318. https://doi.org/10.1016/S0008-8846(02)00783-4.
Mangat, P. S., and M. S. Elgarf. 1999. “Flexural strength of concrete beams with corroding reinforcement.” ACI Struct. J. 96 (1): 149–158.
Mattock, A. H. 1967. “Discussion of ‘Rotational Capacity of Reinforced Concrete beams’ by W.G. Corley.” J. Struct. Div. 93 (ST2): 519–522.
Nagender, T., Y. M. Parulekar, and G. R. Reddy. 2016. “Structural health assessment of a building housing nuclear experimental facility.” In Proc., Structural Engineering Convention (SEC-2016). Chennai, India: CSIR-SERC.
Ožbolt, J., F. Oršanic, and G. Balabanic. 2014. “Modeling pull-out resistance of corroded reinforcement in concrete: Coupled three-dimensional finite element model.” Cem. Concr. Compos. 46 (Feb): 41–55. https://doi.org/10.1016/j.cemconcomp.2013.10.014.
Park, R., and T. Paulay. 1975. Reinforced concrete structures. New York: Wiley.
Priestley, M. 1997. “Displacement based seismic assessment of reinforced concrete buildings.” J. Earthquake Eng. 1 (1): 157–192. https://doi.org/10.1080/13632469708962365.
Samarin, A., and G. Smorchevsky. 1973. The non-destructive testing of concrete. Melbourne, VIC: Central Research Laboratory.
Sezen, H., and E. J. Setzler. 2008. “Reinforcement slip in reinforced concrete columns.” ACI Struct. J. 105 (3): 280–289.
Tamer, A., E. Maaddawy, A. Chahrour, and K. A. Soudki. 2006. “Effect of fiber reinforced polymer wraps on corrosion activity and concrete cracking in chloride-contaminated concrete cylinders.” J. Compos. Constr. 10 (2): 139–147. https://doi.org/10.1061/(ASCE)1090-0268(2006)10:2(139).
Tamer, A., E. Maaddawy, and K. A. Soudki. 2003. “Effectiveness of impressed current technique to simulate corrosion of steel reinforcement in concrete.” J. Mater. Civ. Eng. 15 (1): 41–47. https://doi.org/10.1061/(ASCE)0899-1561(2003)15:1(41).
Torres-Acosta, A., S. Navarro-Gutierrez, and J. Teran-Guillen. 2007. “Residual flexure capacity of corroded reinforced concrete beams.” Eng. Struct. 29 (6): 1145–1152. https://doi.org/10.1016/j.engstruct.2006.07.018.
Vecchio, F. J., and M. P. Collins. 1986. “The modified compression-field theory for reinforced concrete elements subjected to shear.” ACI J. 83 (22): 219–231.
Yalciner, H., S. Sensoy, and O. Eren. 2012. “Effect of corrosion damage on the performance level of a 25-year-old reinforced concrete building.” Shock Vib. 19 (5): 891–902. https://doi.org/10.1155/2012/861509.
Information & Authors
Information
Published In
Copyright
©2020 American Society of Civil Engineers.
History
Received: Apr 23, 2019
Accepted: Sep 3, 2019
Published online: Jan 22, 2020
Published in print: Apr 1, 2020
Discussion open until: Jun 22, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.