Wear Evaluation on Slide Bearings in Expansion Joints Based on Cumulative Displacement for Long-Span Suspension Bridge under Monitored Traffic Flow
Publication: Journal of Performance of Constructed Facilities
Volume 34, Issue 1
Abstract
Expansion joints of bridge superstructures generally suffer deterioration more severely than their main structures, and their actual service life is generally shorter than their design service life. This paper aims at evaluating the wear condition of slide bearings in expansion joints for long-span suspension bridges under monitored traffic flow in the operation stage. The spring element was introduced to model the expansion joint and verified by field load tests. The vehicle−bridge dynamic analysis on a steel truss girder bridge was realized in a nonlinear analysis system, in which the monitored traffic flow was simulated to investigate the back-and-forth displacements of expansion joints. Finally, the wear condition of slide bearings was evaluated by comparing cumulative displacements with the critical value specified by the wear criterion. Findings from this research led to the development of an approximate formula to estimate the cumulative displacement at the expansion joint for long-span suspension bridges, suitable for hand calculations.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work is supported by the National Science Foundation of China (Project No. 51878058) and Foundation Research Funds for the Central University (Project Nos. 300102218209, 300102218403, 300102218702, 300102218403, and 300102219220).
References
Ala, N., E. H. Power, and A. Azizinamini. 2016. “Predicting the service life of sliding surfaces in bridge bearings.” J. Bridge Eng. 21 (2): 04015035. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000767.
Chang, L.-M., and Y.-J. Lee. 2002. “Evaluation of performance of bridge deck expansion joints.” J. Perform. Constr. Facil. 16 (1): 3–9. https://doi.org/10.1061/(ASCE)0887-3828(2002)16:1(3).
Crocetti, R., and B. Edlund. 2003. “Fatigue performance of modular bridge expansion joints.” J. Perform. Constr. Facil. 17 (4): 167–176. https://doi.org/10.1061/(ASCE)0887-3828(2003)17:4(167).
Deng, Y., A. Li, and Y. Ding. 2009. “Research and application of correlation between beam end displacement and temperature of long-span suspension bridge.” [In Chinese.] J. Highway Transp. Res. Dev. 26 (5): 54–58.
Dexter, R. J., M. J. Mutziger, and C. B. Osberg. 2002. Performance testing for modular bridge joint systems. Washington, DC: National Cooperative Highway Research Program, Transportation Research Board.
Ding, Y., W. Zhang, and F. T. K. Au. 2016. “Effect of dynamic impact at modular bridge expansion joints on bridge design.” Eng. Struct. 127 (Nov): 645–662. https://doi.org/10.1016/j.engstruct.2016.09.007.
Fu, C. C., and N. Zhang. 2011. “Investigation of bridge expansion joint failure using field strain measurement.” J. Perform. Constr. Facil. 25 (4): 309–316. https://doi.org/10.1061/(ASCE)CF.1943-5509.0000171.
Guo, T., L. Huang, J. Liu, and Y. Zou. 2018. “Damage mechanism of control springs in modular expansion joints of long-span bridges.” J. Bridge Eng. 23 (7): 04018038. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001255.
Guo, T., J. Liu, and L. Huang. 2016. “Investigation and control of excessive cumulative girder movements of long-span steel suspension bridges.” Supplement, Eng. Struct. 125 (SC): 217–226. https://doi.org/10.1016/j.engstruct.2016.07.003.
Guo, T., J. Liu, Y. Zhang, and S. Pan. 2015. “Displacement monitoring and analysis of expansion joints of long-span steel bridges with viscous dampers.” J. Bridge Eng. 20 (9): 04014099. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000701.
Han, W. 2012. Bridge dynamic analysis system (BDANS) user’s manual, version 1.0. Beijing, China: National copyright administration of People’s Republic of China.
Han, W., X. Liu, L. Deng, Q. Du, and G. Li. 2019. “Updating method of bridge finite element model based on real coded genetic algorithm.” [In Chinese.] J. Traffic Transp. Eng. 19 (2): 14–24.
Han, W., L. Ma, C. S. Cai, S. Chen, and J. Wu. 2015a. “Nonlinear dynamic performance of long-span cable-stayed bridge under traffic and wind.” Wind Struct. 20 (2): 249–274. https://doi.org/10.12989/was.2015.20.2.249.
Han, W., J. Wu, C. S. Cai, and S. Chen. 2015b. “Characteristics and dynamic impact of overloaded extra heavy trucks on typical highway bridges.” J. Bridge Eng. 20 (2): 05014011. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000666.
Han, W., S. Yuan, and L. Ma. 2014. “Vibration of vehicle-bridge coupling system with measured correlated road surface roughness.” Struct. Eng. Mech. 51 (2): 315–331. https://doi.org/10.12989/sem.2014.51.2.315.
Han, W., Y. Yuan, P. Huang, J. Wu, T. Wang, and H. Liu. 2017. “Dynamic impact of heavy traffic load on typical t-beam bridges based on WIM data.” J. Perform. Constr. Facil. 31 (3): 04017001. https://doi.org/10.1061/(ASCE)CF.1943-5509.0000991.
Han, W., Y. Yuan, Q. Xie, X. Chen, and P. Huang. 2018. “Reliability-based truck weight regulation of small- to medium-span bridges.” J. Bridge Eng. 23 (1): 04017109. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001149.
Kong, X., C. S. Cai, and J. X. Hu. 2017. “The state-of-the-art on framework of vibration-based structural damage identification for decision making.” Appl. Sci. 7 (5): 497. https://doi.org/10.3390/app7050497.
Li, Y., X. Xu, N. Yan, J. Deng, and H. Xiang. 2015. “Comparison of wind-vehicle-bridge coupling vibration characteristics for three-line three-tower suspension bridge.” [In Chinese.] J. Traffic Transp. Eng. 15 (6): 17–25.
Lu, N., Y. Liu, and X. Xiao. 2018. “Extrapolating method of extreme load effects on long-span bridge under actual traffic loads.” [In Chinese.] J. Traffic Transp. Eng. 18 (5): 47–55.
Mahmoud, K. M. 2009. Safety and reliability of bridge structures. Boca Raton, FL: CRC Press.
Marques Lima, J., and J. de Brito. 2009. “Inspection survey of 150 expansion joints in road bridges.” Eng. Struct. 31 (5): 1077–1084. https://doi.org/10.1016/j.engstruct.2009.01.011.
McCarthy, E., T. Wright, J. E. Padgett, R. DesRoches, and P. Bradford. 2014. “Development of an experimentally validated analytical model for modular bridge expansion joint behavior.” J. Bridge Eng. 19 (2): 235–244. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000521.
MOCAT (Ministry of Communications and Transportation). 2009. Pot bearings for highway bridges. [In Chinese.]. Beijing, China: MOCAT.
Mukras, S., N. H. Kim, W. G. Sawyer, D. B. Sawyer, and L. B. Bergquist. 2009. “Numerical integration schemes and parallel computation for wear prediction using finite element method.” Wear 266 (7): 822–831. https://doi.org/10.1016/j.wear.2008.12.016.
Ni, Y. Q., X. G. Hua, K. Y. Wong, and J. M. Ko. 2007. “Assessment of bridge expansion joints using long-term displacement and temperature measurement.” J. Perform. Constr. Facil. 21 (2): 143–151. https://doi.org/10.1061/(ASCE)0887-3828(2007)21:2(143).
Okuda, M., S. Yumiyama, and H. Ikeda. 2004. “Reinforcement of expansion joint on Akashi Kaikyo bridge.” [In Japanese.] In Proc., Japan Society of Civil Engineers 59th Annual Meeting. Tokyo: Japan Society of Civil Engineers.
Roeder, C. W. 1998. “Fatigue and dynamic load measurements on modular expansion joints.” Constr. Build. Mater. 12 (2–3): 143–150. https://doi.org/10.1016/S0950-0618(97)00016-0.
Stanton, J. F., C. W. Roeder, and T. I. Campbell. 1999. High-load multi rotational bridge bearings. Washington, DC: National Cooperative Highway Research Program, Transportation Research Board.
Sun, Z., and Y. Zhang. 2016. “Failure mechanism of expansion joints in a suspension bridge.” J. Bridge Eng. 21 (10): 05016005. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000942.
Wang, F., and Y. Cheng. 2010. “Reasons analysis on the expansion joint damage and design improvement.” [In Chinese.] Mod. Transp. Technol. 7 (2): 64–66.
Information & Authors
Information
Published In
Copyright
©2019 American Society of Civil Engineers.
History
Received: Sep 29, 2018
Accepted: Jun 27, 2019
Published online: Dec 5, 2019
Published in print: Feb 1, 2020
Discussion open until: May 5, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.