Numerical Study on Parametric Analysis of Reinforced Concrete Column under Blast Loading
Publication: Journal of Performance of Constructed Facilities
Volume 34, Issue 1
Abstract
Columns are the main load-bearing structure elements in frame structures and outermost columns are the critical structural elements for potential extremist attacks. The explicit nonlinear finite-element method (FEM)–based computer program LS-DYNA is used in this paper to study the response of reinforced concrete (RC) columns subjected to blast loading. The sole objective of this paper is to quantitatively investigate the effect of geometry on the RC columns under a variability of blast loading. An extensive parametric analysis is executed numerically on different shapes of columns to understand the influence of scaled distance, reinforcement ratio, and seismic detailing, after verifying the model with experimental and numerical studies. The responses reveal that the reinforcement ratio, seismic detailing, and scaled distance have a great influence on the blast performance of RC columns with various cross sections. Using the RapidMiner tool, a linear regression analysis is carried out to investigate the most influential parameter.
Get full access to this article
View all available purchase options and get full access to this article.
References
Aoude, H., F. Dagenais, R. Burrell, and M. Saatcioglu. 2015. “Behavior of ultra-high performance fiber reinforced concrete columns under blast loading.” Int. J. Impact Eng. 80 (Jun): 185–202. https://doi.org/10.1016/j.ijimpeng.2015.02.006.
Bao, X., and B. Li. 2010. “Residual strength of blast damaged reinforced concrete columns.” Int. J. Impact Eng. 37 (3): 295–308. https://doi.org/10.1016/j.ijimpeng.2009.04.003.
Barakat, M., and J. Hetherington. 1998. “New architectural forms to reduce the effects of blast waves and fragments on structures.” Struct. Under Shock Impact V 35 (Jan): 53–62.
Barakat, M., and J. Hetherington. 1999. “Architectural approach to reducing blast effects on structures.” Proc. Inst. Civil Eng. Struct. Build. 134 (4): 333–343. https://doi.org/10.1680/istbu.1999.31899.
Baylot, J., and T. Bevins. 2007. “Effect of responding and failing structural components on the airblast pressures and loads on and inside of the structure.” Comput. Struct. 85 (11–14): 891–910. https://doi.org/10.1016/j.compstruc.2007.01.001.
Bischoff, P., and S. Perry. 1991. “Compressive behaviour of concrete at high strain rates.” Mater. Struct. 24 (6): 425–450. https://doi.org/10.1007/BF02472016.
Brannon, R., and S. Leelavanichkul. 2009. “Survey of four damage models for concrete.”. Livermore, CA: Sandia National Laboratories.
Chen, W., and H. Hao. 2012. “Numerical study of a new multi-arch double-layered blast-resistance door panel.” Int. J. Impact Eng. 43 (May): 16–28. https://doi.org/10.1016/j.ijimpeng.2011.11.010.
Chen, W., and H. Hao. 2013. “Numerical study of blast-resistant sandwich panels with rotational friction dampers.” Int. J. Struct. Stab. Dyn. 13 (6): 1350014. https://doi.org/10.1142/S0219455413500144.
Chen, W., H. Hao, and S. Chen. 2015. “Numerical analysis of prestressed reinforced concrete beam subjected to blast loading.” Mater. Des. 65 (Jan): 662–674. https://doi.org/10.1016/j.matdes.2014.09.033.
Ellingwood, B. R. 2006. “Mitigating risk from abnormal loads and progressive collapse.” J. Perform. Constr. Facil. 20 (4): 315–323. https://doi.org/10.1061/(ASCE)0887-3828(2006)20:4(315).
Fujikake, K., and P. Aemlaor. 2013. “Damage of reinforced concrete columns under demolition blasting.” Eng. Struct. 55 (Oct): 116–125. https://doi.org/10.1016/j.engstruct.2011.08.038.
Gebbeken, N., and T. Döge. 2010. “Explosion protection—Architectural design, urban planning and landscape planning.” Int. J. Protective Struct. 1 (1): 1–21. https://doi.org/10.1260/2041-4196.1.1.1.
Goel, M. D., and V. A. Matsagar. 2014. “Blast-resistant design of structures.” Pract. Periodical Struct. Des. Constr. 19 (2): 04014007. https://doi.org/10.1061/(ASCE)SC.1943-5576.0000188.
Li, B., A. Nair, and Q. Kai. 2012. “Residual axial capacity of reinforced concrete columns with simulated blast damage.” J. Perform. Constr. Facil. 26 (3): 287–299. https://doi.org/10.1061/(ASCE)CF.1943-5509.0000210.
LSTC (Livermore Software Technology Corporation). 2010. LS-DYNA version 971 keyword theory manual_Rev5-beta. Livermore, CA: LSTC.
Malvar, L. J. 1998. “Review of static and dynamic properties of steel reinforcing bars.” ACI Mater. J. 95 (5): 609–616.
Malvar, L. J., J. E. Crawford, and K. B. Morrill. 1999. “K&C concrete material model, release III: Automated generation of material model input.”. Burbank, CA: Karagozian & Case Structural Engineers.
Malvar, L. J., and C. A. Ross. 1998. “Review of static and dynamic properties of concrete in tension.” ACI Mater. J. 95 (6): 735–739.
Malvar, L. J., and C. A. Ross. 1999. “Review of strain rate effects for concrete in tension.” ACI Mater. J. 96 (5): 614–616.
Ngo, T., P. Mendis, A. Gupta, and J. Ramsay. 2007. “Blast loading and blast effects on structures—An overview.” Electron. J. Struct. Eng. 7 (1): 76–91.
Rice, D., J. Baum, D. Tennant, and R. Löhner. 2003. “Effect of reinforced concrete column geometry on blast loading and response.” In Proc., 11th Int. Symp. on Interaction of the Effects of Munitions with Structures. Mannheim, Germany: International Symposium on the Interaction of the Effects of Munitions with Structures.
Rigby, S., A. Tyas, T. Bennett, S. Clarke, and S. Fay. 2014. “The negative phase of the blast load.” Int. J. Protective Struct. 5 (1): 1–19. https://doi.org/10.1260/2041-4196.5.1.1.
Shi, Y., H. Hao, and Z. Li. 2008. “Numerical derivation of pressure–impulse diagrams for prediction of RC column damage to blast loads.” Int. J. Impact Eng. 35 (11): 1213–1227. https://doi.org/10.1016/j.ijimpeng.2007.09.001.
Shi, Y., and M. Stewart. 2015. “Spatial reliability analysis of explosive blast load damage to reinforced concrete columns.” Struct. Saf. 53 (Mar): 13–25. https://doi.org/10.1016/j.strusafe.2014.07.003.
Thiagarajan, G., A. Kadambi, S. Robert, and C. Johnson. 2015. “Experimental and finite element analysis of doubly reinforced concrete slabs subjected to blast loads.” Int. J. Impact Eng. 75 (Jan): 162–173. https://doi.org/10.1016/j.ijimpeng.2014.07.018.
US Department of Defense (DoD). 2008. Structures to resist the effects of accidental explosions. Washington, DC: Departments of the Army.
Woodson, S., and J. Baylot. 1999. Structural collapse: Quarter-scale model experiments. Fort Belvoir, VA: US Army Corps of Engineers.
Yan, B., F. Liu, D. Song, and Z. Jiang. 2015. “Numerical study on damage mechanism of RC beams under close-in blast loading.” Eng. Fail. Anal. 51 (May): 9–19. https://doi.org/10.1016/j.engfailanal.2015.02.007.
Yaramada, V. K. R. 2010. Numerical response of steel reinforced concrete slab subjected to blast and pressure loadings in LS-DYNA. Kansas City, MO: Univ. of Missouri Kansas City.
Zhang, F., C. Wu, H. Wang, and Y. Zhou. 2015. “Numerical simulation of concrete filled steel tube columns against BLAST loads.” Thin Walled Struct. 92 (Jul): 82–92. https://doi.org/10.1016/j.tws.2015.02.020.
Information & Authors
Information
Published In
Copyright
©2019 American Society of Civil Engineers.
History
Received: Jun 27, 2018
Accepted: Jun 14, 2019
Published online: Nov 28, 2019
Published in print: Feb 1, 2020
Discussion open until: Apr 28, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.