Buckling Capacity of Socket-Template Scaffold System without X-Bracing
Publication: Journal of Performance of Constructed Facilities
Volume 34, Issue 1
Abstract
Socket-template steel scaffolds are supporting scaffolds that are commonly used in construction to support the gravity load of floor slabs. The buckling behavior of the overall scaffold is remarkably influenced by the complex mechanical behavior of socket connections. Inaccurate evaluation of the mechanical behavior of scaffolds has led to many collapse accidents. Thus, in this study, the mechanical behavior of the socket-template scaffold system was systematically investigated to clarify the buckling capacity of the scaffold, including the socket connections and overall system. Experiment and finite element analysis were adopted to identify the flexural behavior of socket connections and the buckling behavior of the entire scaffold system.
Get full access to this article
View all available purchase options and get full access to this article.
References
Chan, S., H. Huang, and L. Fang. 2005. “Advanced analysis of imperfect portal frames with semirigid base connections.” J. Eng. Mech. 131 (6): 633–640. https://doi.org/10.1061/(ASCE)0733-9399(2005)131:6(633).
Chan, S. L., A. Chu, and F. Albermani. 2003. “Stability and simulation-based design of steel scaffolding without using the effective length method.” Struct. Stab. Dyn. 3 (4): 443–460. https://doi.org/10.1142/S0219455403000999.
Chandrangsu, T., and K. Rasmussen. 2011. “Structural modelling of support scaffold systems.” J. Constr. Steel Res. 67 (5): 866–875. https://doi.org/10.1016/j.jcsr.2010.12.007.
Chu, A., S. Chan, K. Chung. 2002. “Stability of modular steel scaffolding systems-theory and verification.” In Proc., Int. Conf. Advances in Building Technology, 621–628. Amsterdam, Netherlands: Elsevier.
Godley, M., and R. Beale. 1997. “Sway stiffness of scaffold structures.” Struct. Eng. 75 (1): 4–12.
Liu, H., L. Jia, S. Wen, Q. Liu, G. Wang, and Z. Chen. 2016. “Experimental and theoretical studies on the stability of steel tube–coupler scaffolds with different connection joints.” Eng. Struct. 106 (Jan): 80–95. https://doi.org/10.1016/j.engstruct.2015.10.015.
Liu, H., Q. Zhao, X. Wang, and Z. Chen. 2010. “Experimental and theoretical study on stability behavior of structural steel tube and coupler scaffolds without X-bracing.” Eng. Struct. 32 (4): 1003–1015. https://doi.org/10.1016/j.engstruct.2009.12.027.
Milojkovic, B., R. Beale, and M. Godley. 2002. “Determination of the factors of safety of standard scaffold structures.” In Proc., Int. Conf. Advances in Steel Structures, 303–310. Amsterdam, Netherlands: Elsevier.
Peng, J., C. Wu, S. Chan, and C. Huang. 2013. “Experimental and numerical studies of practical system scaffolds.” J. Constr. Steel Res. 91 (Dec): 64–75. https://doi.org/10.1016/j.jcsr.2013.07.028.
Prabhakaran, U., M. Godley, and R. Beale. 2006. “Three-dimensional second order analysis of scaffolds with semi-rigid connections.” Weld. World 50 (Jul): 187–194. https://doi.org/10.1201/9780203734964-25.
Weesner, L., and H. Jones. 2001. “Experimental and analytical capacity of frame scaffolding.” Eng. Struct. 23 (6): 592–599. https://doi.org/10.1016/S0141-0296(00)00087-0.
Yu, W. K., K. F. Chung, and S. L. Chan. 2004. “Structural instability of multi-storey door-type modular steel scaffolds.” Eng. Struct. 26 (7): 867–881. https://doi.org/10.1016/j.engstruct.2004.02.006.
Zhang, H., T. Chandrangsu, and K. Rasmussen. 2010. “Probabilistic study of the strength of steel scaffold systems.” Struct. Saf. 32 (6): 393–401. https://doi.org/10.1016/j.strusafe.2010.02.005.
Zhang, H., K. Rasmussen, and B. Ellingwood. 2012. “Reliability assessment of steel scaffold shoring structure for concrete formwork.” Eng. Struct. 36 (Mar): 81–89. https://doi.org/10.1016/j.engstruct.2011.11.027.
Zhao, Z., and Z. Chen. 2016. “Analysis of door-type modular steel scaffolds based on a novel numerical method.” Adv. Steel Construct. 122 (3): 316–325. https://doi.org/10.1016/j.jcsr.2016.04.001.
Zhao, Z., Z. Chen, X. Yan, X. Hao, and B. Zhao. 2016. “Simplified numerical method for latticed shells that considers member geometric imperfection and semi-rigid joints.” Adv. Struct. Eng. 19 (4): 689–702. https://doi.org/10.1177/1369433216630123.
Zhao, Z., H. Liu, and B. Liang. 2017. “Novel numerical method for the analysis of semi-rigid jointed lattice shell structures considering plasticity.” Adv. Eng. Software 114 (Dec): 208–214. https://doi.org/10.1016/j.advengsoft.2017.07.005.
Zhao, Z., H. Liu, B. Liang, and Q. Sun. 2019. “Semi-rigid beam element model for progressive collapse analysis of steel frame structures.” Struct. Build. 172 (2): 113–126. https://doi.org/10.1680/jstbu.17.00132.
Information & Authors
Information
Published In
Copyright
©2019 American Society of Civil Engineers.
History
Received: Dec 14, 2018
Accepted: Jun 3, 2019
Published online: Oct 31, 2019
Published in print: Feb 1, 2020
Discussion open until: Mar 31, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.