Inspection and Numerical Modeling of Cracking in Existing Nonbearing Walls
Publication: Journal of Performance of Constructed Facilities
Volume 32, Issue 4
Abstract
Cracking of nonbearing walls is not a problem of structural safety but is a source of nonfunctionality problems within the building. Cracking is one of the most common anomalies identified in facades during building inspections and affects the buildings’ in-service performance and durability. These inspections should be complemented with numerical modeling that can simulate the in-service cracking phenomena and help (1) improve the accuracy of the diagnosis in existing buildings, and (2) accomplish better construction practices. The objective of this work is to evaluate cracks in existing facades through inspections and then use the real conditions to validate numerical models. This work can help predict critical zones where it is more probable for cracks to appear in nonbearing walls. Moreover, it is essential to define specific constructive details for these cases and improve design projects, in-service performance, and durability of buildings.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors would like to thank Research Unit CERIS (Civil Engineering Research and Innovation for Sustainability from IST and PTPC (Plataforma Tecnológica Portuguesa de Construção).
References
APICER (Associação Portuguesa da Indústria de Cerâmica). 2000. Guidebook of brick mansonry. [In Portuguese.] Coimbra, Portugal: APICER.
ASTM. 2017a. Standard specification for application of portland cement-based plaster. C926. West Conshohocken, PA: ASTM.
ASTM. 2017b. Standard specification for installation of lathing and furring to receive interior and exterior portland cement-based plaster. C1063. West Conshohocken, PA: ASTM.
Augusti, G., M. Ciampoli, and P. Giovenale. 2001. “Seismic vulnerability of monumental buildings.” Struct. Saf. 23 (3): 253–274.
Betti, M., and A. Vignoli. 2011. “Numerical assessment of the static and seismic behaviour of the basilica of Santa Maria all’Impruneta (Italy).” Constr. Build. Mater. 25 (12): 4308–4324.
BIA (Brick Industry Association). 1988. “Guide specifications for brick masonry. Part 3: Rev.” Accessed July 17, 2017. http://www.gobrick.com/technical-notes.
BIA (Brick Industry Association). 1992. “Brick masonry material properties.” Accessed July 17, 2017. http://www.gobrick.com/technical-notes.
BIA (Brick Industry Association). 1996. “Reinforced brick masonry: Introduction.” Accessed July 17, 2017. http://www.gobrick.com/technical-notes.
BIA (Brick Industry Association). 2002. “Overview of building code requirements for masonry structures.” Accessed July 17, 2017. http://www.gobrick.com/technical-notes.
Bone, S., H. Heard, and D. Horsfall. 1989. Defects in buildings. 1st ed. London: HMSO.
Bonshor, R. B., and L. L. Bonshor. 1995. Cracking in buildings. London: Construction Research Communication.
BSI (British Standards Institution). 2000. Concrete. Part 1: Specification, performance, production and conformity. BS EN 206-1:2000. London: BSI.
CEN (European Committee for Standardization). 2002. Eurocode: Basis of structural design. EN 1990: 2002+A1. Brussels, Belgium: CEN.
CEN (European Committee for Standardization). 2016. Design, preparation and application of external rendering and internal plastering. Part 2: Internal rendering. EN 13914-2. Brussels, Belgium: CEN.
Chernin, L., and D. V. Val. 2011. “Prediction of corrosion-induced cover cracking in reinforced concrete structures.” Constr. Build. Mater. 25 (4): 1854–1869.
Dilrukshi, K. G. S., W. P. S. Dias, and R. K. Rajapakse. 2010. “Numerical modelling of cracks in masonry walls due to thermal movements in an overlying slab.” Eng. Struct. 32 (5): 1411–1422.
Haddad, R. H., and M. M. Smadi. 2004. “Role of fibers in controlling unrestrained expansion and arresting cracking in portland cement concrete undergoing alkali–silica reaction.” Cem. Concr. Res. 34 (1): 103–108.
Ignatiev, N., and S. Chatterji. 1992. “On the mutual compatibility of mortar and concrete in composite members.” Cem. Concr. Res. 14 (3): 179–183.
Kovler, K., and Y. Frosting. 1998. “On the problem of cracking in plaster layers.” Constr. Build. Mater. 12 (5): 251–258.
Lemaitre, J. 1996. A course on damage mechanics, 228. Berlin: Springer.
Ramos, L. F., and P. B. Lourenço. 2004. “Modeling and vulnerability of historical city centers in seismic areas: A case study in Lisbon.” Eng. Struct. 26 (9): 1295–1310.
Romera, L. E., S. Hernández, and J. M. Reinosa. 2008. “Numerical characterization of the structural behaviour of the Basilica of Pilar in Zaragoza (Spain). Part 1: Global and local models.” Adv. Eng. Software 39 (4): 301–314.
Shi, X., N. Xie, K. Fortune, and J. Gong. 2012. “Durability of steel reinforced concrete in chloride environments: An overview.” Constr. Build. Mater. 30 (May): 125–138.
Silva, A., J. de Brito, and P. L. Gaspar. 2016. Methodologies for service life prediction of buildings: With a focus on façade claddings, 431. Basel, Switzerland: Springer.
Tang, S. B., Q. L. Yu, H. Li, C. Y. Yu, C. Y. Bao, and C. A. Tang. 2013. “Mesomechanical model of moisture diffusion and shrinkage cracking in building material: Model development.” Constr. Build. Mater. 47 (Oct): 511–529.
Yuan, Y., and Z. L. Wan. 2002. Prediction of cracking within early-age concrete due to thermal, drying and creep behavior.” Cem. Concr. Res. 32 (7): 1053–1059.
Information & Authors
Information
Published In
Copyright
©2018 American Society of Civil Engineers.
History
Received: Aug 17, 2017
Accepted: Dec 1, 2017
Published online: Apr 24, 2018
Published in print: Aug 1, 2018
Discussion open until: Sep 24, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.