Dynamic Behavior of Masonry Arch Bridge under High-Speed Train Loading: Veresk Bridge Case Study
Publication: Journal of Performance of Constructed Facilities
Volume 32, Issue 3
Abstract
This paper studies the dynamic behavior of one of the oldest masonry arch bridges of the Iranian railway network, the Veresk bridge, located in the Mazandaran province of Iran. To do so, the writers developed an advanced three-dimensional (3D) finite-element model that incorporates all of the geometric complexities of the bridge. The obtained results show a very good agreement between the field test data and the 3D model. Due to the high computational costs associated with running the 3D model, a simplified two-dimensional (2D) model of the bridge was developed using Timoshenko beam elements and calibrated with the field test data and the 3D model. The results show that the 2D model has sufficient accuracy in capturing the dynamic behavior of the bridge. Therefore, an extensive parametric study is performed for inspecting the dynamic behavior of the bridge under the train speeds ranging from 25 to . It is observed that the serviceability and performance of the Veresk masonry arch bridge is not acceptable for speeds greater than , and the bridge experiences resonance when the train passes with the speed close to .
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The research described in this paper was funded by Iranian Railway Research and Training Center under project number 940418702. The authors would like to acknowledge Ms. Maryam Shafaei for preparing Figs. 1 and 2.
References
ABAQUS version 6.12 [Computer software]. Dassault Systèmes Simulia Corporation, Providence, RI.
AREMA (American Railway Engineering and Maintenance-of-Way Association). (2008). “AREMA bridge inspection handbook.” Lanham, MD.
AREMA (American Railway Engineering and Maintenance-of-Way Association). (2013). “Manual for railway engineering.” Lanham, MD.
Ataei, S., Tajalli, M., and Miri, A. (2016). “Assessment of load carrying capacity and fatigue life expectancy of a monumental masonry arch bridge by field load testing: A case study of Veresk.” Struct. Eng. Mech., 59(4), 703–718.
Bayraktar, A., Altunişik, A. C., Birinci, F., Sevim, B., and Türker, T. (2010). “Finite-element analysis and vibration testing of a two-span masonry arch bridge.” J. Perform. Constr. Facil., 46–52.
Bayraktar, A., Altunişik, A. C., Sevim, B., and Türker, T. (2009a). “Modal testing, finite-element model updating, and dynamic analysis of an arch type steel footbridge.” J. Perform. Constr. Facil., 81–89.
Bayraktar, A., Altunişik, A. C., Sevim, B., Türker, T., Domaniç, A., and Taş, Y. (2009b). “Vibration characteristics of Kömürhan Highway Bridge constructed with balanced cantilever method.” J. Perform. Constr. Facil., 90–99.
Bebiano, R., Calçada, R., Camotim, D., and Silvestre, N. (2017). “Dynamic analysis of high-speed railway bridge decks using generalised beam theory.” Thin-Walled Struct., 114, 22–31.
Berberian, M. (1974). “A brief geological description of north-central Iran.” Materials for the study of the seismotectonics of Iran, North-Central Iran, Geological Survey of Iran, Tehran, Iran.
British Standards. (1987). “Guide to measurement and evaluation of human exposure to whole-body mechanical vibration and repeated shock.” BS 6841:1987, London.
CEN (Comité Européen de Normalisation). (2005). “Action on structures—Part 2: Load on bridges.” Eurocode 1, 1991-2, Brussels, Belgium.
ERRI (European Rail Research Institute). (1999). “Rail bridges for speeds higher than 200 km, h.” ERRI-D214, Utrecht, Netherlands.
Frýba, L. (2001). “A rough assessment of railway bridges for high speed trains.” Eng. Struct., 23(5), 548–556.
Fuhrman, D., Rafiee-Dehkharghani, R., Lopez, M., Aref, A., and O’Connor, J. (2014). “Field performance of a new fiber-reinforced polymer deck.” J. Perform. Constr. Facil., 04014162.
ISO. (1997). “Mechanical vibration and shock—Evaluation of human exposure to whole-body vibration. Part 1: General requirements.” ISO 2631-1, Geneva.
Jeon, B.-G., Kim, N.-S., and Kim, S.-I. (2016). “Estimation of the vibration serviceability deflection limit of a high-speed railway bridge considering the bridge-train interaction and travel speed.” KSCE J. Civ. Eng., 20(2), 747–761.
Kishen, J. C., Ramaswamy, A., and Manohar, C. (2013). “Safety assessment of a masonry arch bridge: Field testing and simulations.” J. Bridge Eng., 162–171.
Kwark, J. W., Choi, E. S., Kim, Y. J., Kim, B. S., and Kim, S. I. (2004). “Dynamic behavior of two-span continuous concrete bridges under moving high-speed train.” Comput. Struct., 82(4–5), 463–474.
Kwasniewski, L., Wekezer, J., Roufa, G., Li, H., Ducher, J., and Malachowski, J. (2006). “Experimental evaluation of dynamic effects for a selected highway bridge.” J. Perform. Constr. Facil., 253–260.
Laurendeau, M., Barr, P. J., Higgs, A., Halling, M. W., Maguire, M., and Fausett, R. W. (2015). “Live-load response of a 65-year-old Pratt Truss Bridge.” J. Perform. Constr. Facil., 04014168.
Liu, K., Reynders, E., De Roeck, G., and Lombaert, G. (2009). “Experimental and numerical analysis of a composite bridge for high-speed trains.” J. Sound Vibr., 320(1–2), 201–220.
Srinivas, V., Sasmal, S., Ramanjaneyulu, K., and Ravisankar, K. (2014). “Performance evaluation of a stone masonry arch railway bridge under increased axle loads.” J. Perform. Constr. Facil., 363–375.
Uzgider, E., Aydogan, M., Caglayan, O., Ozakgul, K., and Tezer, O. (2009). “Performance of a tied-arch reinforced concrete railway bridge: Rating, safety assessment, and bond length evaluation.” J. Perform. Constr. Facil., 366–371.
Xia, H., De Roeck, G., Zhang, N., and Maeck, J. (2003). “Experimental analysis of a high-speed railway bridge under Thalys trains.” J. Sound Vibr., 268(1), 103–113.
Xia, H., and Zhang, N. (2005). “Dynamic analysis of railway bridge under high-speed trains.” Comput. Struct., 83(23–24), 1891–1901.
Yang, Y. -B., Yau, J. -D., and Hsu, L. -C. (1997). “Vibration of simple beams due to trains moving at high speeds.” Eng. Struct., 19(11), 936–944.
Information & Authors
Information
Published In
Copyright
©2018 American Society of Civil Engineers.
History
Received: Apr 8, 2017
Accepted: Nov 13, 2017
Published online: Mar 21, 2018
Published in print: Jun 1, 2018
Discussion open until: Aug 21, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.