Risk Analysis of the Opening of Shield-Tunnel Circumferential Joints Induced by Adjacent Deep Excavation
Publication: Journal of Performance of Constructed Facilities
Volume 32, Issue 1
Abstract
Deep excavation projects in urban areas may adversely affect underlying tunnels. Differential settlement and additional stresses in existing tunnels occur frequently due to excavation construction, which leads to the opening of circumferential joints or even to water leakage. To ensure the security of existing tunnels under deep excavation during construction, this paper proposes a risk assessment methodology that aims to evaluate the risks of circumferential cracks of preexisting shield tunnels. Existing tunnels are assumed to be a beam on a Winkler elastic foundation. The longitudinal deformations of the tunnel and internal forces in tunnel structures are obtained from the singular function method. Based on the equivalent axial stiffness theory, the relationship between the opening of circumferential joints and the additional bending moment is established. The Monte Carlo simulation technique is used to quantitatively estimate the potential risk levels of circumferential joints. The calculated results are verified by in situ observations.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors express their sincere appreciation for partial financial support from the National Natural Science Foundation of China (Constant No. 51578116).
References
ANSYS [Computer software]. ANSYS, Canonsburg, PA.
Chen, Y., and Li, Y. S. (2005). “Calculation of tunnel heaving due to unloading of pit excavation.” Underground Space, 1(1), 91–94 (in Chinese).
Cui, Y., Zhang, S. M., Feng, T., Wang, X. Q., and Sun, M. M. (2015). “Study on influence of foundation pit excavation on existing tunnels.” Proc., 4th Int. Conf. on Civil, Architectural and Hydraulic Engineering (ICCAHE 2015), CRC Press, Boca Raton, FL, 407.
Dai, H. W., Chen, R. P., and Chen, Y. M. (2006). “Study on effect of construction loads on longitudinal deformation of adjacent metro tunnels.” Chin. J. Geotech. Eng., 28(3), 312–316 (in Chinese).
Doležalová, M. (2001). “Tunnel complex unloaded by a deep excavation.” Comput. Geotech., 28(6), 469–493.
Eskesen, S. D., Tengborg, P., Kampmann, J., and Veicherts, T. H. (2004). “Guidelines for tunnelling risk management: International Tunnelling Association, Working Group No. 2.” Tunnelling Underground Space Technol., 19(3), 217–237.
Gao, G. Y., Gao, M., Yang, C. B., and Yu, Z. S. (2010). “Influence of deep excavation on deformation of operating metro tunnels and countermeasures.” Chin. J. Geotech. Eng., 32(3), 453–459 (in Chinese).
Huang, X., Huang, H. W., and Zhang, D. M. (2012). “Longitudinal deflection of existing shield tunnels due to deep excavation.” Chin. J. Geotech. Eng., 34(7), 1241–1249 (in Chinese).
Li, Z., Soga, K., Wang, F., Wright, P., and Tsuno, K. (2014). “Behaviour of cast-iron tunnel segmental joint from the 3D FE analyses and development of a new bolt-spring model.” Tunnelling Underground Space Technol., 41, 176–192.
Liao, S. M., Peng, F. L., and Shen, S. L. (2008). “Analysis of shearing effect on tunnel induced by load transfer along longitudinal direction.” Tunnelling Underground Space Technol., 23(4), 421–430.
Liu, H., Li, P., and Liu, J. (2011). “Numerical investigation of underlying tunnel heave during a new tunnel construction.” Tunnelling Underground Space Technol., 26(2), 276–283.
Mindlin, R. D. (1936). “Force at a point in the interior of a semi-infinite solid.” Physics, 7(5), 195–202.
Sakurai, S. (1997). “Lessons learned from field measurements in tunnelling.” Tunnelling Underground Space Technol., 12(4), 453–460.
Shi, P., and Li, P. (2015). “Mechanism of soft ground tunnel defect generation and functional degradation.” Tunnelling Underground Space Technol., 50, 334–344.
Shi, Z. H., Zhou, Q. R., and Zheng, X. W. (2003). “Code for design of metro.”, Beijing (in Chinese).
Shiba, Y., Kawashima, T., Obinata, N., and Kano, T. (1988). “An evaluation method of longitudinal stiffness of shield tunnel lining for application to seismic response analysis.” Proc., Jpn. Soc. Civil Eng., 1988(398), 319–327 (in Japanese).
Talmon, A. M., and Bezuijen, A. (2013). “Calculation of longitudinal bending moment and shear force for Shanghai Yangtze River Tunnel: Application of lessons from Dutch research.” Tunnelling Underground Space Technol., 35, 161–171.
Teachavorasinskun, S., and Chub-uppakarn, T. (2010). “Influence of segmental joints on tunnel lining.” Tunnelling Underground Space Technol., 25(4), 490–494.
Vesic, A. B. (1961). “Bending of beams resting on isotropic elastic solid.” J. Eng. Mech. Div., 87(2), 35–54.
Wang, W. D., Shen, J., Weng, Q., and Wu, J. B. (2006). “Analysis and countermeasures of influence of excavation on adjacent tunnels.” Chin. J. Geotech. Eng., 28(1), 1340–1345 (in Chinese).
Yu, J., Xu, Q. H., Xing, W. W., Ding, Y., and Cheng, W. Z. (2007). “Numerical analysis of upwarping deformation of existing tunnels under a new tunnel’s excavation.” Rock Soil Mech., 28(S1), 653–657 (in Chinese).
Zhang, J. F., Chen, J. J., Wang, J. H., and Zhu, Y. F. (2013). “Prediction of tunnel displacement induced by adjacent excavation in soft soil.” Tunnelling Underground Space Technol., 36, 24–33.
Zhang, Z. G., Huang, M. S., and Wang, W. D. (2009). “Responses of existing tunnels induced by adjacent excavation in soft soils.” Rock Soil Mech., 30(5), 1373–1380 (in Chinese).
Information & Authors
Information
Published In
Copyright
©2017 American Society of Civil Engineers.
History
Received: Mar 29, 2017
Accepted: Jul 18, 2017
Published online: Nov 27, 2017
Published in print: Feb 1, 2018
Discussion open until: Apr 27, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.